Prof Xing Ma

Prof Xing Ma

Professor of Structural Engineering

School of Civil Engineering and Construction

College of Engineering and Information Technology

Eligible to supervise Masters and PhD - email supervisor to discuss availability.

Available For Media Comment.

Xing Ma has been involved in teaching and research in civil engineering for more than 20 years. Xing was a lecturer at Tongji University  China after he finished his PhD study at the same university in 2000 and was promoted to Associate Professor in 2004. During the period at Tongji, his research activities were mainly focused on the nonlinear dynamic behaviour of tower structures and cable structures. From 2004 to 2010, Xing served as a research fellow in the University of Auckland and worked for the “Composite Structural Assembly” program for nearly 6 years. Research activities were focused on thin-skinned composite structures, in particular skin buckling phenomena, concrete-steel interface bonding-slip behaviour and practical design procedures for composite panels. Xing joined the University of South Australia in 2010. Research works were focused on steel structures, composite structures and structural applications of sustainable materials.

Steel Structures,Composite Structures,Structural Stability and Dynamics,Wind Engineering and Earthquake Engineering,Structural Behaviour of Sustainable Materials

Year Citation
2026 Chen, Z., Xiong, Z., Qian, H., Chen, X., Ma, X., Zhuge, Y., . . . Abd-Elaal, E. -S. (2026). Flexural behavior and modeling of stiffness-controllable column base joints for prefabricated underground frame structures. ENGINEERING STRUCTURES, 349, 20 pages.
DOI
2026 Elmetwally, A. I., Abd-Elaal, E. S., Ma, X., Rameezdeen, R., & Upadhyaya, R. (2026). Failure analysis of utility poles: a review of material deficiencies, environmental effects, structural performance, assessment techniques, and design considerations. Engineering Failure Analysis, 186, 110525-1-110525-26.
DOI
2026 El-Naqeeb, M. H., Hassanli, R., Ma, X., Bazli, M., Manalo, A., & Pham, T. M. (2026). Influence of connection type on the effectiveness of CFRP wraps in seismic repair of precast GFRP-reinforced concrete columns. ENGINEERING STRUCTURES, 353, 21 pages.
DOI
2026 Elseady, A. A. E., Zhuge, Y., Ma, X., Chow, C. W. K., Lee, I., & Zeng, J. (2026). Effect of textile configuration and matrix composition on the self-sensing performance of carbon fibre textile-reinforced cementitious composites under flexural loading. STRUCTURES, 86, 18 pages.
DOI
2026 Liu, J., Liu, Y., Ma, X., Xu, H., Wu, X., Liu, M., . . . Zhuge, Y. (2026). Thermal energy storage foam concrete incorporating<i> n</i>-Octadecane/CuO microcapsules synthesised via Pickering emulsion strategy. CEMENT & CONCRETE COMPOSITES, 169, 10 pages.
DOI
2026 Chen, H., Li, D., Ma, X., Zhong, Z., & Abd Elaal, E. S. (2026). Strength reduction of crumb rubber concrete: microstructures and mesoscale modelling. International Journal of Mechanical Sciences, 309(111026), 1-20.
DOI Scopus2 WoS1
2026 Geu, M. J., Zhuge, Y., Ma, X., & Pham, T. M. (2026). Systematic review of physical, mechanical and durability performances of metakaolin concrete. Applied Clay Science, 279(108048), 19 pages.
DOI Scopus3 WoS3
2025 El-Naqeeb, M. H., Hassanli, R., Ma, X., Bazli, M., Manalo, A., & Pham, T. M. (2025). Post-repair behaviour of seismically damaged precast GFRP-RC columns retrofitted with CFRP wraps. CONSTRUCTION AND BUILDING MATERIALS, 505, 22 pages.
DOI WoS1
2025 El-Naqeeb, M. H., Hassanli, R., Pham, T. M., Ma, X., Bazli, M., & Manalo, A. (2025). Seismic resistance of precast GFRP-reinforced concrete columns with grouted corrugated duct connections. Structures, 81(110142), 110142.
DOI Scopus3 WoS4
2025 El-Naqeeb, M. H., Hassanli, R., Ma, X., Bazli, M., Manalo, A., & Pham, T. M. (2025). Cyclic performance of precast GFRP-RC columns with innovative connection systems incorporating ECC and bolts. Bulletin of Earthquake Engineering, 24(2), 849-879.
DOI Scopus1 WoS3
2025 Mosa, A. A., Ma, X., Zhuge, Y., Brown, G., Mills, J. E., & Abd-Elaal, E. S. (2025). Shear performance of pretension bolted connections in steel-concrete-steel sandwich members. Structures, 72(108230), 22 pages.
DOI Scopus2 WoS2
2025 Liu, J., Liu, Y., Ma, X., Xu, H., Wu, X., Liu, M., & Zhuge, Y. (2025). Thermal performance optimisation of foam concrete for energy-efficient construction: A state-of-the-art review. Journal of Building Engineering, 112(113899), 113899.
DOI Scopus5 WoS5
2025 Mashayekhi, A., Hassanli, R., Zhuge, Y., Ma, X., Chow, C. W. K., Bazli, M., & Manalo, A. (2025). Shear performance of fibre-reinforced seawater sea-sand concrete – fibre hybridization and synergy effects. Construction and Building Materials, 472(140955), 18 pages.
DOI
2025 El-Naqeeb, M. H., Hassanli, R., Zhuge, Y., Ma, X., Bazli, M., & Manalo, A. (2025). Cyclic behaviour of GFRP-RC precast column-cap beam frame assembly: A finite element investigation. Engineering Structures, 328(119732), 20 pages.
DOI Scopus4 WoS5
2025 Elseady, A. A. E., Zhuge, Y., Ma, X., Chow, C. W. K., Lee, I., & Zeng, J. (2025). Self-sensing and piezoresistive performance of carbon fibre textile-reinforced cementitious composites under tensile loading. Composite Structures, 356(118897), 19 pages.
DOI Scopus2 WoS2
2025 Mashayekhi, A., Hassanli, R., Zhuge, Y., Ma, X., Chow, C. W. K., Bazli, M., & Manalo, A. (2025). Cyclic performance of GFRP-reinforced seawater sea-sand concrete culverts reinforced with synthetic fibers. Structures, 72(108262), 18 pages.
DOI Scopus2 WoS2
2025 El-Naqeeb, M. H., Hassanli, R., Zhuge, Y., Ma, X., Bazli, M., & Manalo, A. (2025). Beam-column connections in GFRP-RC moment resisting frames: A review of seismic behaviour and key parameters. Structures, 71(108109), 19 pages.
DOI Scopus10 WoS9
2025 Chen, H., Li, D., Ma, X., Zhong, Z., & Abd Elaal, E. S. (2025). Mesoscale analysis of rubber particle effect on flexural strength of crumb rubber concrete. Computers and Concrete, 35(3), 231-243.
DOI Scopus4 WoS4
2025 Chen, H., Li, D., Ma, X., Zhong, Z., & Abd Elaal, E. S. (2025). Tensile strength prediction of crumb rubber concrete based on mesoscale modelling. Australian Journal Of Structural Engineering, 26(1), 9-19.
DOI Scopus4 WoS3
2025 Amjad, H., Abd Elaal, E. S., Ma, X., Benn, T., & Fisher, M. (2025). A critical review of Iron Ore tailings as cement and aggregate substitutes for robust infrastructure: mechanical, durability, and Socio-Economic Impacts. Journal of Cleaner Production, 492(144853), 1-16.
DOI Scopus24 WoS24
2025 Liu, W. X., & Ma, X. (2025). Stress relaxation prediction of basalt fibre reinforced polymer (BFRP) under flexural loads based on the time series parameter method. Australian Journal Of Structural Engineering, online(1), 1-10.
DOI
2025 Geu, M. J., Zhuge, Y., Ma, X., & Pham, T. M. (2025). Optimising calcination temperature for high reactivity metakaolin: Influence on amorphous content, mineralogy and microstructure. Construction and Building Materials, 489(142431), 14 pages.
DOI Scopus5 WoS3
2025 Eldeib, M., Ma, X., Zhuge, Y., Rameezdeen, R., Hassanli, R., Ellis, M., & Abd-Elaal, E. S. (2025). Structural behaviour of steel-timber composite elements: an overview. Low Carbon Materials and Green Construction, 3(1), 1-20.
DOI Scopus5 WoS4
2025 Hu, X., Zhang, D., Deng, H., & Ma, X. (2025). 静态龙卷风下输电塔塔头风荷载特性试验研究. Tongji Daxue Xuebao/Journal of Tongji University, 53(1), 9-16.
DOI Scopus1
2024 Momotaz, H., Rahman, M. M., Karim, M. R., Zhuge, Y., Ma, X., & Levett, P. (2024). Structural performance of fibre reinforced recycled aggregate concrete road kerb sections under monotonic and cyclic loading. Construction and Building Materials, 438(137329), 14 pages.
DOI Scopus3 WoS3
2024 El-Naqeeb, M. H., Hassanli, R., Zhuge, Y., Ma, X., Bazli, M., & Manalo, A. (2024). Performance of GFRP-RC precast cap beam to column connections with epoxy-anchored reinforcement: a numerical study. Archives of Civil and Mechanical Engineering, 24(2), 26 pages.
DOI Scopus8 WoS9
2024 El-Naqeeb, M. H., Ghanbari-Ghazijahani, T., Gholampour, A., Hassanli, R., Zhuge, Y., Ma, X., & Manalo, A. (2024). Cyclic behaviour of an innovative cap beam to column pocketless connection in GFRP-RC precast structures. Structures, 61(106003), 14 pages.
DOI Scopus10 WoS11
2024 Elseady, A. A. E., Zhuge, Y., Ma, X., Chow, C. W. K., Lee, I., Zeng, J., & Gorjian, N. (2024). Development of self-sensing cementitious composites by incorporating a two-dimensional carbon-fibre textile network for structural health monitoring. Construction and Building Materials, 415(135049), 20 pages.
DOI Scopus10 WoS9
2024 El-Naqeeb, M. H., Hassanli, R., Zhuge, Y., Ma, X., & Manalo, A. (2024). Numerical investigation on the behaviour of socket connections in GFRP-reinforced precast concrete. Engineering Structures, 303(117489), 17 pages.
DOI Scopus25 WoS25
2024 Momotaz, H., Rahman, M. M., Karim, M. R., Zhuge, Y., Ma, X., & Levett, P. (2024). Changes in flexural, tensile and impact characteristics of kerb concrete due to the addition of tyre-derived aggregates and polypropylene fibres. Journal of Building Engineering, 83(108438), 17 pages.
DOI Scopus9 WoS9
2024 Liu, J., Zhuge, Y., Ma, X., Xu, H., Wu, X., Liu, M., & Liu, Y. (2024). Foam concrete nanocomposites synergistic integration of ultrasonically exfoliated two-dimensional vermiculite nanoplatelets and expanded vermiculite: Mechanical and thermal performance optimisation. Journal of Building Engineering, 82(108272), 15 pages.
DOI Scopus7 WoS7
2024 Chu, L., Chen, Y., Li, J., Yang, Y., Li, D., & Ma, X. (2024). Flexural performance of composite beams with open-web π-shaped steel partially-encased by concrete. Steel and Composite Structures, 50(4), 419-428.
DOI Scopus4 WoS4
2024 Zu, K., Luo, B., Ma, X., & Xiong, E. G. (2024). Feasibility of suppressing debonding failure for CFRP-hollow section steel tube composite member with a thick-walled section under tensile loading. Thin-Walled Structures, 196(111484), 1-17.
DOI Scopus12 WoS13
2024 Chu, L., Guo, X., Li, J., Xie, X., Li, D., & Ma, X. (2024). Experimental study on the flexural behavior of partially encased composite beams with corrugated steel webs. Advances in Structural Engineering, 27(6), 1071-1084.
DOI Scopus6 WoS6
2024 Mashayekhi, A., Hassanli, R., Zhuge, Y., Ma, X., Chow, C. W. K., Bazli, M., & Manalo, A. (2024). Structural behaviour of small GFRP-reinforced seawater sea-sand fiber reinforced concrete culverts. Structures, 69(107492), 17 pages.
DOI Scopus5 WoS5
2024 Mashayekhi, A., Hassanli, R., Zhuge, Y., Ma, X., Chow, C. W. K., Bazli, M., & Manalo, A. (2024). Cyclic flexural performance of seawater sea-sand concrete reinforced with hybrid fibers. Construction and Building Materials, 449(138480), 19 pages.
DOI Scopus8 WoS8
2024 Mashayekhi, A., Hassanli, R., Zhuge, Y., Ma, X., Chow, C. W. K., Bazli, M., & Manalo, A. (2024). Synergistic effects of fiber hybridization on the fracture toughness of seawater sea-sand concrete. Construction and Building Materials, 444(137845), 15 pages.
DOI Scopus17 WoS15
2024 Mashayekhi, A., Hassanli, R., Zhuge, Y., Ma, X., & Chow, C. W. K. (2024). Synergistic effects of fiber hybridization on the mechanical performance of seawater sea-sand concrete. Construction and Building Materials, 416(135087), 16 pages.
DOI Scopus30 WoS27
2023 Fan, W., Zhuge, Y., Ma, X., Chow, C. W. K., Liu, Y., Huang, G., & Gorjian, N. (2023). Effects of carbonation on mechanical properties of CAC-GGBFS blended strain hardening cementitious composites. Low Carbon Materials and Green Construction, 1(1), 18 pages.
DOI Scopus6 WoS1
2023 Sheta, A., Ma, X., Zhuge, Y., ElGawady, M., Mills, J. E., & Abd Elaal, E. (2023). Axial compressive behaviour of thin-walled composite columns comprise high-strength cold-formed steel and PE-ECC. Thin-Walled Structures, 184(110471), 1-19.
DOI Scopus31 WoS27
2023 Elseady, A. A. E., Lee, I., Zhuge, Y., Ma, X., Chow, C. W. K., & Gorjian, N. (2023). Piezoresistivity and AC impedance spectroscopy of cement-based sensors: basic concepts, interpretation, and perspective. Materials, 16(2), 1-29.
DOI Scopus22 WoS19 Europe PMC2
2023 Sheta, A. M., Ma, X., Zhuge, Y., ElGawady, M. A., Mills, J. E., & Abd Elaal, E. S. (2023). Shear behaviour of thin-walled composite cold-formed steel/PE-ECC beams. Steel And Composite Structures, 46(1), 75-92.
DOI Scopus5 WoS4
2023 Vafaei, D., Ma, X., Hassanli, R., Duan, J., & Zhuge, Y. (2023). Experimental study on cyclic flexural behaviour of GFRP-reinforced seawater sea-sand concrete slabs with synthetic fibres. Ocean Engineering, 273(114014), 1-14.
DOI Scopus19 WoS16
2023 Momotaz, H., Rahman, M. M., Karim, M. R., Zhuge, Y., Ma, X., & Levett, P. (2023). Comparative study on properties of kerb concrete made from recycled materials and related carbon footprint. Journal of Building Engineering, 72(106484), 1-20.
DOI Scopus20 WoS17
2023 Chow, C. W. K., Rameezdeen, R., Chen, G. Y., Xu, H., Rahman, M. M., Ma, X., . . . Gao, J. (2023). Real‑time humidity monitoring using distributed optical sensor for water asset condition assessment. Water Conservation Science and Engineering, 8(no. 1, article no. 22), 1-10.
DOI Scopus1 WoS1
2023 Chen, H., Li, D., Ma, X., Zhong, Z., & Abd Elaal, E. S. (2023). Mesoscale analysis of rubber particle effect on indirect tensile and flexural tensile strength of crumb rubber mortar. Journal of Composites Science, 7(1), 1-25.
DOI Scopus6 WoS5
2023 Chen, H., Li, D., Ma, X., Zhong, Z., & Abd Elaal, E. S. (2023). Compressive strength prediction of crumb rubber mortar based on mesoscale model. Engineering Failure Analysis, 152(107485), 1-14.
DOI Scopus8 WoS7
2023 Momotaz, H., Rahman, M. M., Karim, M. R., Zhuge, Y., Ma, X., & Levett, P. (2023). Properties of the interfacial transition zone in rubberised concrete - an investigation using nano-indentation and EDS analysis. Journal of Building Engineering, 77(107405), 1-17.
DOI Scopus30 WoS29
2023 Mosa, A. A., Ma, X., Zhuge, Y., Mills, J. E., & Abd Elaal, E. S. (2023). Analysis of tapered three-layered sandwich flexural members (stobie poles) with partial shear interaction: analytical model. Thin-Walled Structures, 191(111032), 1-28.
DOI Scopus3 WoS3
2023 Zu, K., Luo, B., Mo, Z., Dong, Z. Q., & Ma, X. (2023). Tensile behavior of improved CFRP-square hollow steel tube composite member strengthened with thick-walled steel tube. Construction and Building Materials, 398(132447), 1-15.
DOI Scopus10 WoS10
2022 Chu, L., Wang, S., Li, D., Zhao, J., & Ma, X. (2022). Cyclic behaviour of beam-column joints made of crumb rubberised concrete (CRC) and traditional concrete (TC). Case Studies in Construction Materials, 16(article no. e00867), 1-21.
DOI Scopus23 WoS19
2022 Zhang, D., Hu, X., Song, X., Deng, H., & Ma, X. (2022). Investigation on aerodynamic characteristics for steel tubular cross-arms of transmission tower under skew wind. Journal of Wind Engineering and Industrial Aerodynamics, 222, 1-13.
DOI Scopus16 WoS12
2022 Sheta, A., Ma, X., Zhuge, Y., ElGawady, M., Mills, J., & Abd Elaal, E. (2022). Flexural strength of innovative thin-walled composite cold-formed steel/PE-ECC beams. Engineering Structures, 267(article no. 114675), 1-20.
DOI Scopus14 WoS14
2022 Eltayeb, E., Ma, X., Zhuge, Y., Xiao, J., & Youssf, O. (2022). Composite walls composed of profiled steel skin and foam rubberized concrete subjected to eccentric compressions. Journal of Building Engineering, 46, 1-28.
DOI Scopus62 WoS56
2022 Vafaei, D., Ma, X., Hassanli, R., Duan, J., & Zhuge, Y. (2022). Microstructural behaviour and shrinkage properties of high-strength fiber-reinforced seawater sea-sand concrete. Construction and Building Materials, 320, 1-11.
DOI Scopus71 WoS69
2022 Youssf, O., Mills, J. E., Ellis, M., Benn, T., Zhuge, Y., Ma, X., & Gravina, R. J. (2022). Practical application of crumb rubber concrete in residential slabs. Structures, 36, 837-853.
DOI Scopus53 WoS43
2022 Momotaz, H., Rahman, M. M., Karim, M. R., Iqbal, A., Zhuge, Y., Ma, X., & Levett, P. (2022). A review of current design and construction practice for road kerbs and a sustainability analysis. Sustainability, 14(3, article no. 1230), 1-22.
DOI Scopus11 WoS9
2022 Vafaei, D., Ma, X., Hassanli, R., Duan, J., & Zhuge, Y. (2022). Microstructural and mechanical properties of fiber-reinforced seawater sea-sand concrete under elevated temperatures. Journal of Building Engineering, 50(104140), 1-22.
DOI Scopus40 WoS36
2022 Vafaei, D., Hassanli, R., Ma, X., Duan, J., & Zhuge, Y. (2022). Fracture toughness and impact resistance of fiber-reinforced seawater sea-sand concrete. Journal of Materials in Civil Engineering, 34(5), 1-16.
DOI Scopus27 WoS24
2022 Zhuge, Y., Ma, X., & Zeng, J. (2022). Recent progress in buckling restrained braces: a review on material development and selection. Advances in Structural Engineering, 25(7), 1549-1564.
DOI Scopus13 WoS10
2022 Liu, J., Zhuge, Y., Ma, X., Liu, M., Liu, Y., Wu, X., & Xu, H. (2022). Physical and mechanical properties of expanded vermiculite (EV) embedded foam concrete subjected to elevated temperatures. Case Studies in Construction Materials, 16(e01038), 1-12.
DOI Scopus37 WoS32
2022 Fan, W., Zhuge, Y., Ma, X., Chow, C. W. K., Gorjian, N., & Li, D. (2022). Retrofitting of damaged reinforced concrete pipe with CAC-GGBFS blended strain hardening cementitious composite (SHCC). Thin-Walled Structures, 176(109351), 1-17.
DOI Scopus11 WoS11
2022 Mosa, A. A., Ma, X., Zhuge, Y., Brown, G., Mills, J. E., & Abd Elaal, E. S. (2022). Finite element model for tapered three layers composite columns (Stobie poles). Journal of Constructional Steel Research, 196(article no. 107414), 1-19.
DOI Scopus4 WoS3
2021 Fan, W., Zhuge, Y., Ma, X., Chow, C. W. K., Gorjian, N., & Liu, Y. (2021). Feasibility of using the hollow glass microsphere to develop lightweight CAC-GGBFS-blended strain-hardening cementitious composites. Frontiers in Materials, 8(752720), 1-14.
DOI Scopus10 WoS8
2021 Li, D., Hassanli, R., Su, Y., Zhuge, Y., & Ma, X. (2021). Cyclic behavior of FRP - crumb rubber concrete - steel double skin tubular columns and beams. Steel & Composite Structures, 41(5), 649-661.
DOI Scopus8 WoS5
2021 Vafaei, D., Hassanli, R., Ma, X., Duan, J., & Zhuge, Y. (2021). Sorptivity and mechanical properties of fiber-reinforced concrete made with seawater and dredged sea-sand. Construction and Building Materials, 270(article no. 121436), 1-18.
DOI Scopus97 WoS79
2021 Yi, O., Mills, J. E., Zhuge, Y., Ma, X., Gravina, R. J., & Youssf, O. (2021). Performance of crumb rubber concrete composite-deck slabs in 4-point-bending. Journal of Building Engineering, 40(102695), 1-13.
DOI Scopus59 WoS51
2021 Roychand, R., Gravina, R. J., Zhuge, Y., Ma, X., Mills, J. E., & Youssf, O. (2021). Practical rubber pre-treatment approch for concrete use-an experimental study. Journal of Composites Science, 5(6, article no. 143), 1-17.
DOI Scopus63 WoS53
2021 Gravina, R. J., Xie, T., Roychand, R., Zhuge, Y., Ma, X., Mills, J. E., & Youssf, O. (2021). Bond behaviour between crumb rubberized concrete and deformed steel bars. Structures, 34, 2115-2133.
DOI Scopus46 WoS43
2021 Yi, O., Zhuge, Y., Ma, X., Gravina, R. J., Mills, J. E., & Youssf, O. (2021). Push-off and pull-out bond behaviour of CRC composite slabs - an experimental investigation. Engineering Structures, 228(111480), 1-19.
DOI Scopus43 WoS39
2021 Li, D., Zhuge, Y., Liu, Y., Pham, P. N., Zhang, C., Duan, W., & Ma, X. (2021). Reuse of drinking water treatment sludge in mortar as substitutions of both fly ash and sand based on two treatment methods. Construction and Building Materials, 277(article no. 122330), 1-11.
DOI Scopus40 WoS35
2021 Eltayeb, E., Ma, X., Zhuge, Y., Xiao, J., & Youssf, O. (2021). Dynamic performance of rubberised concrete and its structural applications: an overview. Engineering Structures, 234(111990), 1-20.
DOI Scopus82 WoS71
2021 Sheta, A., Ma, X., Zhuge, Y., ElGawady, M. A., Mills, J. E., Singh, A., & Abd Elaal, E. S. (2021). Structural performance of novel thin-walled composite cold-formed steel/PE-ECC beams. Thin-Walled Structures, 162(107586), 1-24.
DOI Scopus43 WoS36
2021 Zhang, D., Song, X., Deng, H., Hu, X., & Ma, X. (2021). Experimental and numerical study on the aerodynamic characteristics of steel tubular transmission tower bodies under skew winds. Journal of Wind Engineering and Industrial Aerodynamics, 214(104678), 1-14.
DOI Scopus21 WoS17
2021 Ma, X., Chouw, N., Elgawady, M., Zhu, S., & Guo, X. (2021). Resilient civil infrastructure under dynamic loadings 2020. Shock and Vibration, 2021(9790657), 1.
DOI
2021 Chen, H., Li, D., Ma, X., Zhong, Z., & Abd Elaal, E. S. (2021). Mesoscale analysis of rubber particle effect on young's modulus and creep behaviour of crumb rubber concrete. International Journal of Mechanics and Materials in Design, 17(3), 659-678.
DOI Scopus18 WoS14
2021 Ellis, M., Ma, X., Mills, J. E., & Gravina, R. (2021). Durability of Crumbed Rubber Concrete. Concrete in Australia, 47(3), 31-40.
2020 Chu, L., He, Y., Li, D., Ma, X., & Cheng, Z. (2020). Structural performance of reinforced concrete wall with boundary columns under shear load. Structural Engineering and Mechanics, 76(4), 479-489.
DOI Scopus6 WoS4
2020 Yi, O., Mills, J. E., Zhuge, Y., Ma, X., Gravina, R. J., & Youssf, O. (2020). Case study of the structural performance of composite slabs with low strength CRC delivered by concrete truck. Case Studies in Construction Materials, 13, 1-18.
DOI Scopus18 WoS15
2020 Eltayeb, E., Ma, X., Zhuge, Y., Youssf, O., & Mills, J. E. (2020). Influence of rubber particles on the properties of foam concrete. Journal of Building Engineering, 30(101217), 1-13.
DOI Scopus110 WoS101
2020 Eltayeb, E., Ma, X., Zhuge, Y., Youssf, O., Mills, J. E., Xiao, J., & Singh, A. (2020). Structural performance of composite panels made of profiled steel skins and foam rubberised concrete under axial compressive loads. Engineering Structures, 211(article no.110448), 1-21.
DOI Scopus65 WoS54
2020 Eltayeb, E., Ma, X., Zhuge, Y., Youssf, O., Mills, J. E., & Xiao, J. (2020). Structural behaviour of composite panels made of profiled steel sheets and foam rubberised concrete under monotonic and cyclic shearing loads. Thin-Walled Structures, 151(article no. 106726), 1-15.
DOI Scopus50 WoS47
2020 Youssf, O., Mills, J. E., Benn, T., Zhuge, Y., Ma, X., Roychand, R., & Gravina, R. (2020). Development of crumb rubber concrete for practical application in the residential construction sector - design and processing. Construction and Building Materials, 260(119813), 1-12.
DOI Scopus113 WoS98
2020 Fan, W., Zhuge, Y., Ma, X., Chow, C. W. K., Gorjian, N., Oh, J. A., & Duan, W. (2020). Durability of fibre-reinforced calcium aluminate cement (CAC)-ground granulated blast furnace slag (GGBFS) blended mortar after sulfuric acid attack. Materials, 13(no. 7, article no. 3822), 1-21.
DOI Scopus18 WoS18 Europe PMC5
2020 Li, D., Xiao, J., Zhuge, Y., Mills, J. E., Senko, H., & Ma, X. (2020). Experimental study on crumb rubberised concrete (CRC) and reinforced CRC slabs under static and impact loads. Australian Journal of Structural Engineering, 21(4), 294-306.
DOI Scopus22 WoS20
2020 Fan, W., Zhuge, Y., Ma, X., Chow, C. W. K., & Gorjian, N. (2020). Strain hardening behaviour of PE fibre reinforced calcium aluminate cement (CAC) - ground granulated blast furnace (GGBFS) blended mortar. Construction and Building Materials, 241(118100), 1-15.
DOI Scopus35 WoS32
2020 Roychand, R., Gravina, R. J., Zhuge, Y., Ma, X., Youssf, O., & Mills, J. E. (2020). A comprehensive review on the mechanical properties of waste tire rubber concrete. Construction and Building Materials, 237(117651), 1-20.
DOI Scopus397 WoS349
2019 Abd Elaal, E. S., Araby, S., Mills, J. E., Youssf, O., Roychand, R., Ma, X., . . . Gravina, R. J. (2019). Novel approach to improve crumb rubber concrete strength using thermal treatment. Construction and Building Materials, 229(article no. 116901), 1-11.
DOI Scopus137 WoS125
2019 Youssf, O., Hassanli, R., Mills, J., Skinner, W., Ma, X., Zhuge, Y., . . . Gravina, R. (2019). Influence of mixing procedures, rubber treatment, and fibre additives on rubcrete performance. Journal of Composite Science, 3(1), 1-17.
DOI Scopus109 WoS102
2019 Youssf, O., Hassanli, R., Mills, J. E., Ma, X., & Zhuge, Y. (2019). Cyclic performance of steel-concrete-steel sandwich beams with Rubcrete and LECA concrete core. Journal of composites science, 3(1), 1-18.
DOI Scopus32 WoS29
2019 Ridha, M. M. S., Li, D., Clifton, G. C., & Ma, X. (2019). Structural behavior of composite panels made of lightly profiled steel skins and lightweight concrete under concentric and eccentric loads. Journal of structural engineering-ASCE, 145(10), 1-9.
DOI Scopus19 WoS14
2019 Xu, H. J., Deng, H. Z., Hu, X. Y., & Ma, X. (2019). Wind tunnel test on aerodynamic coefficients of multi-bundled conductors under skew winds. Journal of fluids and structures, 91(102702), 1-17.
DOI Scopus9 WoS9
2018 Abd Elaal, E. S., Mills, J., & Ma, X. (2018). A review of transmission line systems under downburst wind loads. Journal of wind engineering and industrial aerodynamics, 179, 503-513.
DOI Scopus69 WoS54
2018 Chu, L., Li, D., Ma, X., & Zhao, J. (2018). Cyclic behaviour of concrete encased steel (CES) column-steel beam joints with concrete slabs. Steel and composite structures, 29(6), 731-744.
DOI
2018 Abd Elaal, E. S., Mills, J. E., & Ma, X. (2018). Numerical simulation of downburst wind flow over real topography. Journal of wind engineering and industrial aerodynamics, 172, 85-95.
DOI Scopus39 WoS31
2018 Ma, X., Chouw, N., ElGawady, M., & Zhu, S. (2018). Resilient civil infrastructure under dynamic loadings. Shock and vibration, 2018(9458023), 1.
DOI
2018 Lu, C., Ma, X., & Mills, J. E. (2018). Cyclic performance of bolted cruciform and splice connectors in retrofitted transmission tower legs. Thin-walled structures, 122, 264-285.
DOI Scopus19 WoS16
2018 Lu, C., Ma, X., & Mills, J. (2018). Cyclic performance of reinforced legs in retrofitted transmission towers. Archives of civil and mechanical engineering, 18(4), 1608-1625.
DOI Scopus13 WoS8
2018 Dong, J., Ma, X., Zhuge, Y., & Mills, J. (2018). Contact buckling behaviour of corrugated plates subjected to linearly varying in-plane loads. Steel and composite structures, 29(3), 1-16.
DOI Scopus3 WoS3
2018 Dong, J., Ma, X., Zhuge, Y., & Mills, J. E. (2018). Unilateral contact buckling behaviour of orthotropic plates subjected to combined in-plane shear and bending. International journal of solids and structures, 150, 135-153.
DOI Scopus10 WoS9
2018 Dong, J., Ma, X., Zhuge, Y., & Mills, J. (2018). Local buckling of thin plate on tensionless elastic foundations under interactive uniaxial compression and shear. Theoretical and applied mechanics Letters, 8(2), 75-82.
DOI Scopus9 WoS7
2018 Dong, J., Ma, X., Zhuge, Y., & Mills, J. E. (2018). Buckling analysis of laminated composite plate on tensionless elastic foundations under uniaxial compression. International journal of structural stability and dynamics, 18(6, article no. 1850079), 1-21.
DOI Scopus9 WoS9
2018 Chu, L., Li, D., Ma, X., & Zhao, J. (2018). Cyclic behaviour of concrete encased steel (CES) column-steel beam joints with concrete slabs. Steel and Composite Structures, 29(6), 731-744.
DOI Scopus12 WoS11
2017 Dong, J., Ma, X., Zhuge, Y., & Mills, J. E. (2017). Shear buckling analysis of laminated plates on tensionless elastic foundations. Steel and composite structures, 24(6), 697-709.
DOI Scopus12 WoS12
2016 Li, D., Mills, J. E., Benn, T., Ma, X., Gravina, R., & Zhuge, Y. (2016). Review of the performance of high-strength rubberized concrete and its potential structural applications. Advances in civil engineering materials, 5(1), 149-166.
DOI Scopus56 WoS46
2016 Dong, J., Zhuge, Y., Mills, J. E., & Ma, X. (2016). Local buckling of profiled skin sheets resting on tensionless elastic foundations under uniaxial compression. Thin-Walled Structures, 103, 81-89.
DOI Scopus13 WoS11
2016 Dong, J., Zhuge, Y., Mills, J. E., & Ma, X. (2016). Local buckling of profiled skin sheets resting on tensionless elastic foundations under in-plane shear loading. European Journal of Mechanics, A/Solids, 58, 131-139.
DOI Scopus8 WoS7
2016 Li, D., Smith, S., & Ma, X. (2016). End condition effect on initial buckling performance of thin plates resting on tensionless elastic or rigid foundations. International Journal of Mechanical Sciences, 105, 83-89.
DOI Scopus18 WoS16
2016 Deng, H., Xu, H., & Ma, X. (2016). Wind-vibration coefficient of guyed masts. Journal of vibration and shock, 35(22), 48-53.
DOI Scopus6
2016 Lu, C., Ou, Y., Xing, M., & Mills, J. E. (2016). Structural analysis of lattice steel transmission towers: a review. Journal of steel structures and construction, 2(1).
DOI
2016 Dong, J., Ma, X., Mills, J. E., & Zhuge, Y. (2016). A review of skin buckling theory in composite members. Applied mechanics and materials, 846, 312-317.
DOI
2015 Ma, X. (2015). The art of steel structures. Journal of steel structures & sonstruction, 1(1).
DOI
2015 Lu, C., Ma, X., & Mills, J. (2015). Modeling of retrofitted steel transmission towers. Journal of constructional steel research, 112, 138-154.
DOI Scopus42 WoS28
2015 Araby, S., Saber, N., Ma, X., Kawashima, N., Kang, H., Shen, H., . . . Ma, J. (2015). Implication of multi-walled carbon nanotubes on polymer/graphene composites. Materials and Design, 65, 690-699.
DOI Scopus118 WoS108
2014 Lu, C., Ma, X., & Mills, J. E. (2014). The structural effect of bolted splices on retrofitted transmission tower angle members. Journal of constructional steel research, 95, 263-278.
DOI Scopus43 WoS36
2014 Abd Elaal, E. S., Mills, J. E., & Ma, X. (2014). Empirical models for predicting unsteady-state downburst wind speeds. Journal of wind engineering and industrial aerodynamics, 129, 49-63.
DOI Scopus32 WoS19
2014 Youssf, O., ElGawady, M. A., Mills, J. E., & Ma, X. (2014). An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes. Construction and building materials, 53, 522-532.
DOI Scopus283 WoS225
2014 Youssf, O., Elgawady, M., Mills, J. E., & Ma, X. (2014). Finite element modelling and dilation of FRP-confined concrete columns. Engineering structures, 79, 70-85.
DOI Scopus97 WoS88
2013 Abd Elaal, E. S., Mills, J. E., & Ma, X. (2013). A coupled parametric-CFD study for determining ages of downbursts through investigation of different field parameters. Journal of wind engineering and industrial aerodynamics, 123(PA), 30-42.
DOI Scopus26 WoS20
2013 Abd Elaal, E. S., Mills, J. E., & Ma, X. (2013). An analytical model for simulating steady state flows of downburst. Journal of wind engineering and industrial aerodynamics, 115, 53-64.
DOI Scopus51 WoS42
2012 Zou, L., Huang, K., Wang, L., Butterworth, J., & Ma, X. (2012). Vibration control of adjacent buildings considering pile-soil-structure interaction. Journal of Vibration and Control, 18(5), 684-695.
DOI Scopus12 WoS12
2012 Zou, L. H., Liu, A. P., Ma, X., Zhang, C., & Huang, K. (2012). Synthesis of vibration waves based on wavelet technology. Shock and vibration, 19(3), 391-403.
DOI Scopus2
2012 Zou, L. H., Liu, A. P., Ma, X., Zhang, C., & Huang, K. (2012). Synthesis of vibration waves based on wavelet technology. SHOCK AND VIBRATION, 19(3), 391-403.
DOI WoS2
2012 Mills, J. E., Ma, X., & Zhuge, Y. (2012). Experimental study on multi-panel retrofitted steel transmission towers. Journal of constructional steel research, 78, 58-67.
DOI Scopus56 WoS44
2012 Zhuge, Y., Mills, J. E., & Ma, X. (2012). Modelling of steel lattice tower angle legs reinforced for increased load capacity. Engineering structures, 43, 160-168.
DOI Scopus70 WoS46
2012 Ma, X., Mills, J. E., Brown, G., & Zhuge, Y. (2012). A force method model for static analysis of transmission line system subjected to in-plane and out-of-plane loadings. Advanced materials research, 368-373, 3535-3538.
DOI
2011 Ma, X., Wang, Z. M., & Liu, J. S. (2011). Project description : structural design of a municipal statue in Dongguan, China. Journal of the international association for shell and spatial structures, 52(1), 63-64.
2011 Keage, N., Maiolo, C., Pierotti, R., & Ma, X. (2011). Experimental study and numerical simulation on compressive buckling behavior of thin steel skins in unilateral contact with rigid constraints. Frontiers of Architecture and Civil Engineering in China, 5(3), 335-345.
DOI Scopus3 WoS3
2011 Ma, X. (2011). A nonlinear force method model for dynamic analysis of cable trusses. Advanced materials research, 250-253(3), 2281-2284.
DOI Scopus2 WoS2
2011 Ma, X. (2011). Practical design procedure for thin-skinned steel-concrete composite sections. Advanced materials research, 243-249, 1421-1424.
DOI
2011 Ma, X., Butterworth, J. W., & Clifton, C. G. (2011). Shear buckling of infinite plates resting on tensionless elastic foundations. European journal of mechanics A : solids, 30(6), 1024-1027.
DOI Scopus19 WoS16
2011 Ma, X., Wang, Z. M., & Liu, J. S. (2011). Project description: Structural design of a municipal statue in Dongguan, China. Journal of the International Association for Shell and Spatial Structures, 52(167), 63-64.
2010 Zou, L., Butterworth, J. W., & Ma, X. (2010). Seismic Control of Multi-Adjacent-Building Systems. International Journal of Structural Stability and Dynamics, 10(1), 21-35.
DOI Scopus4 WoS4
2009 Ma, X., Butterworth, J. W., & Clifton, G. C. (2009). Response of an infinite beam resting on a tensionless elastic foundation subjected to arbitrarily complex transverse loads. Mechanics Research Communications, 36(7), 818-825.
DOI Scopus21 WoS18
2009 Ma, X., Butterworth, J. W., & Clifton, G. C. (2009). Static analysis of an infinite beam resting on a tensionless Pasternak foundation. European Journal of Mechanics A Solids, 28(4), 697-703.
DOI Scopus70 WoS60
2009 Lihua, Z., Suliang, D., Butterworth, J., Ma, X., Dong, B., & Liu, A. (2009). Grey forecasting model for active vibration control systems. Journal of Sound and Vibration, 322(4-5), 690-706.
DOI Scopus22 WoS13
2009 Ma, X., & Butterworth, J. W. (2009). A force method model for dynamic analysis of flat-sag cable structures. SHOCK AND VIBRATION, 16(6), 623-635.
DOI WoS3
2009 Ma, X., & Butterworth, J. W. (2009). A force method model for dynamic analysis of flat-sag cable structures. Shock and Vibration, 16(6), 623-635.
DOI Scopus3
2008 Ma, X., Butterworth, J. W., & Clifton, G. C. (2008). Practical analysis procedure for compressive local buckling of skin sheets: In composite panels. Advanced Steel Construction, 4(3), 230-242.
Scopus17 WoS13
2008 Ma, X., Butterworth, J., & Clifton, C. (2008). Initial compressive buckling of clamped plates resting on tensionless elastic or rigid foundations. Journal of Engineering Mechanics, 134(6), 514-518.
DOI Scopus25 WoS19
2008 Ma, X., Butterworth, J. W., & Clifton, G. C. (2008). Unilateral contact buckling of lightly profiled skin sheets under compressive or shearing loads. International Journal of Solids and Structures, 45(3-4), 840-849.
DOI Scopus33 WoS30
2007 Ma, X., Butterworth, J. W., & Clifton, C. (2007). Compressive buckling analysis of plates in unilateral contact. International Journal of Solids and Structures, 44(9), 2852-2862.
DOI Scopus39 WoS33
2007 Ma, X. (2007). A force method model for dynamic analysis of cable trusses. Journal of the International Association for Shell and Spatial Structures, 48(154), 101-108.
2004 Ma, X., Wang, Z., Deng, H., & Wang, Z. (2004). Theoretical and experimental research on dynamic behavior of guyed masts under wind load. Acta Mechanica Solida Sinica, 17(2), 166-171.
DOI Scopus5 WoS2
2003 He, Y. L., Ma, X., & Wang, Z. M. (2003). Nonlinear discrete analysis method for random vibration of guyed masts under wind load. Journal of Wind Engineering and Industrial Aerodynamics, 91(4), 513-525.
DOI Scopus24 WoS15
2003 Ma, X., Zhong, Z., & Hu, R. L. (2003). Three-dimension model for rain-wind induced vibrations of inclined cables. Tongji Daxue Xuebao Journal of Tongji University, 31(8), 895-898.
Scopus3
2002 Yu, A., Fang, M., & Ma, X. (2002). Theoretical research on naturally curved and twisted beams under complicated loads. Computers and Structures, 80(32), 2529-2536.
DOI Scopus27 WoS25
2002 Ma, X., Deng, H. Z., & Wang, Z. M. (2002). Discrete random vibration analysis of guyed masts under stochastic wind load. Gongcheng Lixue Engineering Mechanics, 19(1), 34-37.
Scopus1
2001 Ma, X., Deng, H., & Wang, Z. (2001). Discrete analysis of vibration response moment of guyed mast to stochastic wind load. Zhendong Gongcheng Xuebao Journal of Vibration Engineering, 14(4), 398-401.
2001 He, Y. L., Ma, X., Wang, Z. M., & Dong, S. L. (2001). Wind-induced response of guyed masts. Journal of the International Association for Shell and Spatial Structures, 42(137), 129-138.
Scopus1
2001 He, Y. L., Ma, X., Wang, Z. M., & Dong, S. L. (2001). Wind-induced responses analysis and wind tunnel test research of guyed masts. Shanghai Jiaotong Daxue Xuebao Journal of Shanghai Jiaotong University, 35(10), 1438-1443.
Scopus3
2001 Deng, H., Chen, X., Tu, H., Ma, X., & Wang, Z. (2001). Experimental study on model of Jiangyin long span transmission tower. Jianzhu Jiegou Xuebao Journal of Building Structures, 22(6), 31.
Scopus18

Year Citation
2024 Su, Y., Ma, X., Zhuge, Y., Abdelaal, E., Singh, A., Habib, H., & Aburas, M. (2024). Experimental Study on Screw Connections of Aluminium Roof-Purlin Systems. In N. Chouw, & C. Zhang (Eds.), Event/exhibition information: 26th Australasian Conference on the Mechanics of Structures and Materials, ACMSM 2023, Auckland, 03/12/2023-06/12/2023
Source details - Title: Proceedings of the 26th Australasian Conference on the Mechanics of Structures and Materials (Vol. 513 LNCE, pp. 285-296). Germany: SPRINGER-VERLAG SINGAPORE PTE LTD.
DOI
2024 Chen, H., Li, D., Xing, M., Zhong, Z., & Abd Elaal, E. S. (2024). Mesoscale analysis of rubber particle effect on tensile strength of crumb rubber concrete. In Event/exhibition information: 26th Australasian Conference on the Mechanics of Structures and Materials, ACMSM 2023, Auckland, 03/12/2023-06/12/2023
Source details - Title: Proceedings of the 26th Australasian Conference on the Mechanics of Structures and Materials (Vol. 513 LNCE, pp. 77-87). Singapore: Springer.
DOI
2020 Yi, O., Zhuge, Y., Ma, X., Gravina, R., & Mills, J. E. (2020). Small-scale pull-out testing on bond behaviour of profiled steel reinforced CRC composite slabs. In C. M. Wang, J. C. M. Ho, & S. Kitipornchai (Eds.), Source details - Title: ACMSM25: Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials (Vol. 37, pp. 783-792). Singapore: Springer.
DOI Scopus3 WoS3
2020 Li, D., Zhuge, Y., Rahman, M., & Ma, X. (2020). Mix design and mechanical properties of rubberized cement stabilized soil (RCSS) pavers. In C. M. Wang, J. C. M. Ho, & S. Kitipornchai (Eds.), Source details - Title: ACMSM25: Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials (Vol. 37, pp. 591-603). Singapore: Springer.
DOI
2020 Eltayeb, E., Ma, X., Zhuge, Y., & Youssf, O. (2020). Fresh and hardened properties of innovative foamed-rubberized concrete. In C. M. Wang, J. C. M. Ho, & S. Kitipornchai (Eds.), Source details - Title: ACMSM25: Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials (Vol. 37, pp. 33-44). Singapore: Springer.
DOI Scopus5 WoS2
2018 Zhuge, Y., Ma, X., Li, D., & Xiao, J. (2018). Crumb Rubberized Concrete (CRC) application in structural engineering. In X. Jianzhuang (Ed.), Source details - Title: Sustainable Structures and Materials (pp. 1-18). China: China Architecture & Building Press.

Year Citation
2025 Eldeib, M., Ma, X., Zhuge, Y., Rameezdeen, R., Hassanli, R., Ellis, M., & Abd-Elaal, E. S. (2025). Optimized design and structural performance of steel-encased timber composite (SETC) beams. In Proceedings from the 14th World Conference on Timber Engineering Advancing Timber for the Future Built Environment (pp. 4153-4162). Australia: World Conference on Timber Engineering.
DOI
2025 Abbara, A. A., Rameezdeen, R., Ma, X., Zhuge, Y., O'Hehir, J. F., Shanks, J., & Xu, Y. (2025). STATISTICAL LENGTH EFFECT ON THE LONGITUDINAL COMPRESSION STRENGTH OF AUSTRALIAN RADIATA PINE SOLID SAWN TIMBER. In Proceedings from the 14th World Conference on Timber Engineering Advancing Timber for the Future Built Environment Wcte 2025 (pp. 4489-4494). World Conference On Timber Engineering 2025.
DOI
2023 Chen, H., Li, D., Ma, X., Zhong, Z., & Abd Elaal, E. S. (2023). Mesoscale analysis of rubber particle effect on compressive strength of crumb rubber mortar. In A. Kotousov, C. -T. Ng, & W. Yan (Eds.), Procedia Structural Integrity Vol. 45 (pp. 104-108). Netherlands: Elsevier BV.
DOI
2021 Lu, C., Ma, X., & Mills, J. E. (2021). Numerical modelling on cyclic behaviour of retrofitted steel transmission towers. In ACAM10: 10th Australasian Congress on Applied Mechanics 2021, ACAM 2021 (pp. 477-490). Australia: Engineers Australia.
2021 Vafaei, D., Ma, X., Hassanli, R., & Zhuge, Y. (2021). Effects of seawater and sea-sand on concrete properties: a review paper. In C. M. Wang, V. Dao, & S. Kitipornchai (Eds.), EASEC16: Proceedings of The 16th East Asian-Pacific Conference on Structural Engineering and Construction 2019 Vol. 101 (pp. 2037-2049). Singapore: Springer.
DOI Scopus6
2020 Ma, X., Zhuge, Y., Li, D., & Gorjian, N. (2020). Structural properties of lightweight rubberized concrete. In C. M. Wang, J. C. M. Ho, & S. Kitipornchai (Eds.), ACMSM25 Vol. 37 (pp. 53-60). Singapore: Springer.
DOI Scopus2 WoS2
2020 Yang, Z., Deng, H., Li, C., & Ma, X. (2020). Strength of multiplanar longitudinal plate-to-circular hollow section (CHS) connections reinforced by external ring stiffeners. In Proceedings of the 9th International Conference on Advances in Steel Structures, ICASS 2018 (pp. 1-12). China: Hong Kong Institution of Steel Construction.
DOI
2020 Xu, H., Deng, H., & Ma, X. (2020). Numerical investigation of drag coefficients of 2-bundled conductors. In Proceedings of the 9th International Conference on Advances in Steel Structures, ICASS 2018 (pp. 1-10). China: Hong Kong Institution of Steel Construction.
DOI Scopus1
2019 Li, D., Zhuge, Y., Xiao, J., Mills, J., & Ma, X. (2019). Experimental study on crumb rubberised concrete (CRC) and reinforced CRC slabs under impact loads. In F. Ren, C. Wu, & T. S. Lok (Eds.), 13th International Conference on Shock and Impact Loads on Structures, SILOS 2019 (pp. 253-261). Singapore: CI Premier.
2019 Youssf, O., Hassanli, R., Skinner, W., Mills, J. E., Ma, X., Zhuge, Y., & Gravina, R. (2019). Best mixing procedures of crumb rubber concrete. In S. Foster (Ed.), FIB 2018 - Proceedings for the 2018 fib Congress: Better, Smarter, Stronger (pp. 616-625). Switzerland: Federation Internationale du Beton.
2019 Yi, O., Zhuge, Y., Ma, X., Gravina, R., & Mills, J. E. (2019). Small-scale testing on bond behaviour of profiled steel reinforced CRC composite slabs. In S. Foster (Ed.), FIB 2018 - Proceedings for the 2018 fib Congress: Better, Smarter, Stronger (pp. 1192-1206). Switzerland: Federation Internationale du Beton.
2018 Heng, L., Rahman, M. M., Zhuge, Y., & Ma, X. (2018). A review of dem-based simulation of fresh concrete flow. In J. Shiau (Ed.), Proceedings of International Structural Engineering and Construction Vol. 5 (pp. 1-6). United States: ISEC Press.
DOI Scopus1
2018 Yi, O., Zhuge, Y., Ma, X., Gravina, R., & Mills, J. E. (2018). Small-scale testing on bond behaviour of profiled steel reinforced crc composite slabs. In Fib Symposium (pp. 1192-1206).
2018 Youssf, O., Hassanli, R., Skinner, W., Mills, J. E., Ma, X., Zhuge, Y., & Gravina, R. (2018). Best mixing procedures of Crumb rubber concrete. In Fib Symposium (pp. 616-625).
2018 Fan, W., Zhuge, Y., Ma, X., Chow, C. W. K., & Gorjian, N. (2018). Potential of using inorganic cementitious composites to retrofit concrete sewerage pipes under chemical and biogenic attack: a review. In Proceedings of the 2018 International Symposium on Advanced Composites Technology (pp. 85-91). Australia: University of South Australia.
2017 Fan, W., Zhuge, Y., & Ma, X. (2017). Investigation on the material properties and energy absorption capability of ECC. In East Asia-Pacific conference on structural engineering and construction (EASEC) (pp. 377-385). China: East Asia-Pacific conference on structural engineering and construction.
2017 Youssf, O., ElGawady, M. A., Mills, J. E., & Ma, X. (2017). Analytical modeling of the main characteristics of crumb rubber concrete. In M. L. Nehdi (Ed.), SP-314 Eco-Efficient and Sustainable Concrete Incorporating Recycled Post-Consumer and Industrial Byproducts (pp. 1-18). US: American Concrete Institute.
2017 Dong, J., Ma, X., Mills, J. E., & Zhuge, Y. (2017). Shear buckling of composite plates on tensionless elastic foundations. In H. Hao, & C. Zhang (Eds.), Mechanics of Structures and Materials: Advancements and Challenges 2016 (pp. 181-186). UK: CRC Press.
2017 Ma, X., Xiao, J., Mills, J., & Li, D. (2017). Mechanical properties of recycled aggregated concrete with crumb rubber particles. In Proceedings of the East Asia-Pacific conference on structural engineering and construction (pp. 386-391). China: East Asia-Pacific Conference on Structural Engineering and Construction.
2017 Youssf, O., ElGawady, M. A., Mills, J. E., & Ma, X. (2017). Analytical modeling of the main characteristics of crumb rubber concrete. In American Concrete Institute ACI Special Publication Vol. 2017-January (pp. 15-32).
Scopus28
2016 Ma, X. (2016). Contact buckling phenomena in composite components. In International conference on structural integrity and failure (SIF-16): Advances in materials and structures conference proceedings (pp. 150-154). Australia: University of Adelaide.
2015 Youssf, O., ElGawady, M. A., Mills, J. E., Ma, X., & Benn, T. (2015). Behaviour of crumb rubber concrete columns under seismic loading. In Concrete 2015 Conference Proceedings on USB (pp. 482-491). Australia: Concrete Institute of Australia.
2015 Dong, J., Ma, X., Mills, J. E., & Zhuge, Y. (2015). A review of the development and implementation of contact buckling theory in composite structures. In Composites Australia and CRC ACS 2015 Composites Conference. Australia: CRC Press.
2015 Lu, C., Ma, X., & Mills, J. E. (2015). Structural performance of bolted connectors in retrofitted transmission tower leg members. In Electrical Transmission and Substation Structures 2015: Technical Challenges and Innovative Solutions in Grid Modernization - Proceedings of the 2015 Electrical Transmission and Substation Structures Conference (pp. 489-499). US: ASCE - American Society of Civil Engineers.
DOI Scopus4 WoS3
2014 Ma, X., & Mills, J. E. (2014). Structural performance of composite panels filled with light-weight crumb rubber concrete. In S. T. Smith (Ed.), 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23) (pp. 669-674). Australia: Southern Cross University.
2014 Lu, C., Ma, X., & Mills, J. E. (2014). Modelling and parametric analysis of bolted connections on retrofitted transmission tower leg members. In S. T. Smith (Ed.), Proceedings of the 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23). Australia: Southern Cross University.
2014 Li, D., Mills, J., Benn, B. T., & Ma, X. (2014). Abrasion and impact resistance investigation of crumbed rubber concrete (CRC). In S. T. Smith (Ed.), Proceedings of the 23rd Australasian conference on the mechanics of structures and materials (ACMSM23) (pp. 1-6). Australia: Southern Cross University.
2014 Youssf, O., Elgawady, M., Mills, J. E., & Ma, X. (2014). Prediction of crumb rubber concrete strength. In S. Smith, & S. T (Eds.), Proceedings of the 23rd Australasian conference on the mechanics of structures and materials (ACMSM23) (pp. 261-266). Australia: Southern Cross University.
2013 Ma, X. (2013). Prevention study on rain-wind-induced vibration of inclined cables. In AWES workshop proceedings: 16th AWES workshop, Brisbane (2013) (pp. 1-4). Australia: Australasian Wind Engineering Society.
2013 Abdelaal, E., Ma, X., & Mills, J. E. (2013). A newly developed analytical model of transient downburst wind loads. In Proceedings of the 21st Australian Conference on the Mechanics of Structures and Materials: From materials to structures: advancement through innovation (pp. 425-430). US: CRC Press.
Scopus3
2013 Youssf, O., ElGawady, M. A., Mills, J. E., & Ma, X. (2013). Experimental and finite element investigation of rubberized concrete confined by FRP. In V. Dao, & P. Dux (Eds.), Concrete 2013 : conference proceedings (pp. 1-10). Australia: Arinex.
DOI
2013 Abd Elaal, E. S., Mills, J. E., & Ma, X. (2013). A simplified design charts for the vertical profile of horizontal downburst wind speeds. In N. R. Iyer (Ed.), Proceedings of the Eighth Asia-Pacific Conference on Wind Engineering (pp. 511-521). Singapore: Research Publishing.
DOI
2011 Ma, X., Butterworth, J. W., & Clifton, C. G. (2011). Contact buckling theory of thin plates in composite members: a review. In Proceedings of the 21st Australian Conference on the Mechanics of Structures and Materials: Incorporating Sustainable Practice in Mechanics and Structures of Materials (pp. 59-64). UK: Taylor and Francis.
2010 Ma, X. (2010). Numerical simulating for rain-wind induced vibration of inclined cables. In M. Dundar (Ed.), Proceedings of the International Science and Technology Conference 2010. Turkish Republic of Northern Cyprus: ISTEC.
2010 Ma, X. (2010). Bond-Slip effect on Flexural response of composite members. In M. Dundar (Ed.), Proceedings of the International Science and Technology Conference 2010. Turkish Republic of Northern Cyprus: ISTEC.
2007 Ma, X., Zhong, Z., & Li, D. D. (2007). A two-degree-of-freedom model for rain-wind-induced vibration of inclined cables. In Progress in Mechanics of Structures and Materials Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials Acmsm19 (pp. 325-330).
2007 Ma, X., Wang, Z. M., & Liu, J. S. (2007). Structural design for a huge municipal statue. In Proceedings of 8th Pacific Structural Steel Conference Steel Structures in Natural Hazards Pssc 2007 Vol. 1 (pp. 221-227).
2007 Ma, X., & Butterworth, J. W. (2007). A simplified method for compressive local buckling of skin sheets in composite panels. In Proceedings of 8th Pacific Structural Steel Conference Steel Structures in Natural Hazards Pssc 2007 Vol. 1 (pp. 379-387).
2007 Nie, G. J., Zhong, Z., & Ma, X. (2007). Research on the property of concrete slabs with type II cold-rolled deformed bars. In Progress in Mechanics of Structures and Materials Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials Acmsm19 (pp. 699-703).
Scopus1
2007 Ma, X., Butterworth, J., & Clifton, C. (2007). Elasto-plastic post-buckling analysis of plates resting on tensionless foundations. In Progress in Mechanics of Structures and Materials Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials Acmsm19 (pp. 103-108).
Scopus5

  • SA Water Scholarship, SA Water, 29/02/2024 - 31/01/2028

  • Investigating Structural Stability of Tall Stobie Poles under various deflection conditions, ElectraNet SA, 19/08/2024 - 31/12/2027

  • Reinforced crumbed rubber concrete for residential construction, ARC - Linkage Project, 20/09/2016 - 30/11/2020

  • Non-destructive assessment of SA Water concrete assets, SA Water, 29/03/2019 - 28/02/2020

  • Reinforced crumbed rubber concrete for residential construction (Industry Partner), Tyre Stewardship Australia Ltd, 20/09/2016 - 30/09/2019

Courses I teach

  • CIVE 2005 Mechanics of Materials (2025)
  • CIVE 5080 Advanced Steel Structures (2025)
  • CIVE 2005 Mechanics of Materials (2024)
  • CIVE 5080 Advanced Steel Structures (2024)

Date Role Research Topic Program Degree Type Student Load Student Name
2025 Principal Supervisor 298 - Corrosion prediction in concrete drinking water tanks Doctor of Philosophy Doctorate Full Time Mr Zheyuan Cao
2025 Principal Supervisor Development of innovated unfoldable steel timber structural systems for modular buildings Doctor of Philosophy Doctorate Full Time Mr Mingyuan Leo Wu
2024 Co-Supervisor Evaluation of robust performance of cement-based structures utilizing iron ore tailings as fine aggregates. Doctor of Philosophy Doctorate Full Time Mr Hassan Amjad
2023 Principal Supervisor Structural analysis of deflected Stobie poles Doctor of Philosophy Doctorate Full Time Mr Ahmed Ibrahim Elmetwally Elmetwally Said
2023 Co-Supervisor Developing Innovative Connection Systems for Precast Concrete Elements Reinforced with Glass Fibre Reinforced Polymers Doctor of Philosophy Doctorate Full Time Mr Mohamed Hafez Mohamed Ahmed El-Naqeeb
2023 Co-Supervisor h4>Verification of the stress grade of Australian softwood through alternative testing methods Doctor of Philosophy Doctorate Full Time Mr Abbas Abbara
2023 Co-Supervisor Durability and structural performances of green concrete made from recycled plastic and clay minerals Doctor of Philosophy Doctorate Full Time Mr Mayen Jacob Geu
2023 Co-Supervisor Improving performance of tall Stobie poles: Investigating structural stability and ageing characteristics Doctor of Philosophy Doctorate Full Time Mr Ruixin Huo
2022 Principal Supervisor Mechanical properties and structural applications of chemical treated super-high-strength timber Doctor of Philosophy Doctorate Full Time Mr Mohamed Eldeib

Connect With Me

External Profiles

Other Links