Ling Yin

Dr Ling Yin

Associate Professor/Reader

School of Electrical and Mechanical Engineering

Faculty of Sciences, Engineering and Technology

Eligible to supervise Masters and PhD - email supervisor to discuss availability.

My research focuses on advanced materials and manufacturing. These materials have applications in optics, semiconductors, mechanical structures, dental restorations, osteoporosis/osteoarthritis studies, and marine/animal sciences. Much of my research involves collaborations with scholars or practitioners in physics, materials science, dentistry, anatomy, orthopedic surgery, tribology, and zoology. I have published some 100 refereed journal papers and 9 book chapters, and produced 2 patents and a dozen industrial project reports. My publications can be viewed at Google Scholar or Scopus .  I have also given over 60 conference presentations and 30 industrial consortia and public seminars on four continents.

I am a senior member of the North American Manufacturing Research Institution (NAMRI) and the Society of Manufacturing Engineers (SME). I am also a member of the American Society of Mechanical Engineers (ASME), Optical Society of America (OSA), American Ceramic Society (Acers), ASM International (ASM), and the Society of Photo-Optical Instrumentation Engineers (SPIE).

  • Journals
    Year Citation
    2023 Lu, K., He, Q., Xie, J., Yang, H., Chen, Z., Ge, D., . . . Yin, L. (2023). Nano-to-microscale ductile-to-brittle transitions for edge cracking suppression in single-diamond grinding of lithium metasilicate/disilicate glass-ceramics. Journal of the European Ceramic Society, 43(4), 1698-1713.
    DOI Scopus5 WoS1
    2023 Juri, A. Z., Belli, R., Lohbauer, U., Ebendorff-Heidepriem, H., & Yin, L. (2023). Edge chipping damage in lithium silicate glass-ceramics induced by conventional and ultrasonic vibration-assisted diamond machining. Dental Materials, 39(6), 557-567.
    DOI Scopus6 WoS1
    2023 Juri, A. Z., Basak, A. K., & Yin, L. (2023). Failure mechanisms in in-situ SEM micropillar compressions of pre-crystallized and crystallized zirconia-containing lithium silicate glass-ceramics. Ceramics International, 49(16), 27165-27175.
    DOI
    2023 Juri, A. Z., Song, X. -F., Nakanishi, Y., Dudley, J., Jamieson, L., & Yin, L. (2023). Surface fractures in pre-crystallized and crystallized zirconia-containing lithium silicate glass-ceramics generated in ultrasonic vibration-assisted machining. Journal of the Mechanical Behavior of Biomedical Materials, 147, 1-12.
    DOI Scopus1 Europe PMC1
    2023 Song, X. F., Zhao, J., Yan, H., Yu, W., & Yin, L. (2023). Waterjet machining of biological tissues in medical surgeries: From soft tissue dissection to bone cutting. Journal of Manufacturing Processes, 107, 529-548.
    DOI Scopus1
    2022 Lu, K., Chen, Z., Luo, Y., Huang, P., He, Q., Xie, J., & Yin, L. (2022). Microgrinding of lithium metasilicate/disilicate glass-ceramics. Ceramics International, 48(6), 8548-8562.
    DOI Scopus2 WoS2
    2022 Juri, A. Z., Basak, A. K., & Yin, L. (2022). In-situ SEM cyclic nanoindentation of pre-sintered and sintered zirconia materials.. Journal of the mechanical behavior of biomedical materials, 126, 1-12.
    DOI Scopus6 WoS4 Europe PMC1
    2022 Song, X. F., Ma, H. R., He, Y. P., & Yin, L. (2022). Soft machining-induced surface and edge chipping damage in pre-crystalized lithium silicate glass ceramics. Journal of the Mechanical Behavior of Biomedical Materials, 131, 1-10.
    DOI Scopus2 WoS2
    2022 Juri, A. Z., Basak, A. K., & Yin, L. (2022). In-situ SEM micropillar compression of porous and dense zirconia materials. Journal of the Mechanical Behavior of Biomedical Materials, 132, 1-11.
    DOI Scopus2 WoS2
    2022 Sales, A., Kotousov, A., Perilli, E., & Yin, L. (2022). Improvement of the Fatigue Resistance of Super Duplex Stainless-Steel (SDSS) Components Fabricated by Wire Arc Additive Manufacturing (WAAM). Metals, 12(9), 12 pages.
    DOI Scopus5 WoS2
    2021 Alao, A. -R., Stoll, R., Zhang, Y., & Yin, L. (2021). Influence of CAD/CAM milling, sintering and surface treatments on the fatigue behavior of lithium disilicate glass ceramic.. J Mech Behav Biomed Mater, 113, 1-12.
    DOI Scopus8 WoS6 Europe PMC1
    2021 Juri, A. Z., Basak, A. K., & Yin, L. (2021). Microstructural responses of Zirconia materials to in-situ SEM nanoindentation.. J Mech Behav Biomed Mater, 118, 1-12.
    DOI Scopus9 WoS9 Europe PMC2
    2021 Juri, A. Z., Nakanishi, Y., & Yin, L. (2021). Microstructural influence on damage-induced zirconia surface asperities produced by conventional and ultrasonic vibration-assisted diamond machining. Ceramics International, 47(18), 25744-25754.
    DOI Scopus10 WoS7
    2021 Juri, A. Z., Zhang, Y., Kotousov, A., & Yin, L. (2021). Zirconia responses to edge chipping damage induced in conventional and ultrasonic vibration-assisted diamond machining. Journal of Materials Research and Technology, 13, 573-589.
    DOI Scopus21 WoS10
    2021 Sales, A., Kotousov, A., & Yin, L. (2021). Design against fatigue of super duplex stainless steel structures fabricated by wire arc additive manufacturing process. Metals, 11(12), 1965-1-1965-10.
    DOI Scopus11 WoS6
    2020 Xiang, Z. X., Chen, X. P., Song, X. F., & Yin, L. (2020). Responses of pre-crystallized and crystallized zirconia-containing lithium silicate glass ceramics to diamond machining. Ceramics International, 46(2), 1924-1933.
    DOI Scopus16 WoS14
    2020 Chen, X. P., Xiang, Z. X., Song, X. F., & Yin, L. (2020). Machinability: Zirconia-reinforced lithium silicate glass ceramic versus lithium disilicate glass ceramic. Journal of the Mechanical Behavior of Biomedical Materials, 101, 10 pages.
    DOI Scopus36 WoS30 Europe PMC5
    2020 Song, X. F., Kang, N., & Yin, L. (2020). Effect of bur selection on machining damage mechanisms of polymer-infiltrated ceramic network material for CAD/CAM dental restorations. Ceramics International, 46(14), 23116-23126.
    DOI Scopus6 WoS4
    2019 Springall, G., & Yin, L. (2019). Response of pre-crystallized CAD/CAM zirconia-reinforced lithium silicate glass ceramic to cyclic nanoindentation. Journal of the Mechanical Behavior of Biomedical Materials, 92, 58-70.
    DOI Scopus7 WoS5
    2019 Baba, T., Nakashima, Y., Takahashi, S., Matsubara, T., Yin, L., & Nakanishi, Y. (2019). Micro-slurry jet for surface processing of dental ceramics. Biosurface and Biotribology, 5(1), 8-12.
    DOI Scopus7
    2019 Abduo, J., & Yin, L. (2019). Fits of implant zirconia custom abutments and frameworks: A systematic review and meta-analyses. International Journal of Oral and Maxillofacial Implants, 34(1), 99-114.
    DOI Scopus6 WoS5 Europe PMC2
    2018 Niroshan, N., Yin, L., Sivakugan, N., & Veenstra, R. (2018). Relevance of SEM to Long-Term Mechanical Properties of Cemented Paste Backfill. Geotechnical and Geological Engineering, 36(4), 2171-2187.
    DOI Scopus23 WoS23
    2018 Yin, L., Baba, T., & Nakanishi, Y. (2018). Fracture-free surfaces of CAD/CAM lithium metasilicate glass-ceramic using micro-slurry jet erosion. Journal of the Mechanical Behavior of Biomedical Materials, 80, 59-67.
    DOI Scopus14 WoS9 Europe PMC1
    2018 Song, X., Yang, J., Ren, H., Lin, B., Nakanishi, Y., & Yin, L. (2018). Ultrasonic assisted high rotational speed diamond machining of dental glass ceramics. International Journal of Advanced Manufacturing Technology, 96(1-4), 387-399.
    DOI Scopus15 WoS9
    2018 Springall, G. A. C., & Yin, L. (2018). Nano-scale mechanical behavior of pre-crystallized CAD/CAM zirconia-reinforced lithium silicate glass ceramic. Journal of the Mechanical Behavior of Biomedical Materials, 82, 35-44.
    DOI Scopus11 WoS9
    2017 Alao, A., Stoll, R., Song, X., Miyazaki, T., Hotta, Y., Shibata, Y., & Yin, L. (2017). Surface quality of yttria-stabilized tetragonal zirconia polycrystal in CAD/CAM milling, sintering, polishing and sandblasting processes. Journal of the Mechanical Behavior of Biomedical Materials, 65, 102-116.
    DOI Scopus78 WoS62 Europe PMC18
    2017 Elbourne-Binns, L., Baena, J. C., Yin, L., & Peng, Z. (2017). Lubricated wear of machinable lithium disilicate glass ceramic. Key Engineering Materials, 739, 18-22.
    DOI
    2017 Alao, A., Stoll, R., Song, X., Abbott, J., Zhang, Y., Abduo, J., & Yin, L. (2017). Fracture, roughness and phase transformation in CAD/CAM milling and subsequent surface treatments of lithium metasilicate/disilicate glass-ceramics. Journal of the Mechanical Behavior of Biomedical Materials, 74, 251-260.
    DOI Scopus39 WoS31 Europe PMC11
    2016 Alao, A., & Yin, L. (2016). Assessment of elasticity, plasticity and resistance to machining-induced damage of porous pre-sintered zirconia using nanoindentation techniques. Journal of Materials Science and Technology, 32(5), 402-410.
    DOI Scopus38 WoS36
    2016 Peng, Z., Izzat Abdul Rahman, M., Zhang, Y., & Yin, L. (2016). Wear behavior of pressable lithium disilicate glass ceramic. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 104(5), 968-978.
    DOI Scopus54 WoS43 Europe PMC10
    2016 Song, X., Ren, H., & Yin, L. (2016). Machinability of lithium disilicate glass ceramic in in vitro dental diamond bur adjusting process. Journal of the Mechanical Behavior of Biomedical Materials, 53, 78-92.
    DOI Scopus59 WoS52 Europe PMC14
    2015 Alao, A., & Yin, L. (2015). Nano-mechanical behaviour of lithium metasilicate glass-ceramic. Journal of the Mechanical Behavior of Biomedical Materials, 49, 162-174.
    DOI Scopus26 WoS19 Europe PMC3
    2015 Srikanth, R., Kosmac, T., Della Bona, A., Yin, L., & Zhang, Y. (2015). Effects of cementation surface modifications on fracture resistance of zirconia. Dental Materials, 31(4), 435-442.
    DOI Scopus30 WoS30 Europe PMC12
    2015 Alao, A., & Yin, L. (2015). Nanoindentation characterization of the elasticity, plasticity and machinability of zirconia. Materials Science and Engineering A, 628, 181-187.
    DOI Scopus30 WoS24
    2015 Song, X., Jin, C., & Yin, L. (2015). Quantitative assessment of the enamel machinability in tooth preparation with dental diamond burs. Journal of the Mechanical Behavior of Biomedical Materials, 41, 1-12.
    DOI Scopus16 WoS14 Europe PMC2
    2014 Smith, C., Jiang, D., Gong, J., & Yin, L. (2014). Determination of the mechanical behavior of lithium disilicate glass ceramics by nanoindentation & scanning probe microscopy. Materials Chemistry and Physics, 148(3), 1036-1044.
    DOI Scopus36 WoS29
    2014 Alao, A., & Yin, L. (2014). Loading rate effect on the mechanical behavior of zirconia in nanoindentation. Materials Science and Engineering A, 619, 247-255.
    DOI Scopus46 WoS42
    2014 Alao, A., & Yin, L. (2014). Nano-scale mechanical properties and behavior of pre-sintered zirconia. Journal of the Mechanical Behavior of Biomedical Materials, 36, 21-31.
    DOI Scopus34 WoS31 Europe PMC4
    2013 Song, X. F., Yin, L., Peng, J. H., & Lin, B. (2013). Cutting characteristics of dental glass ceramics during in vitro dental abrasive adjusting using a high-speed electric handpiece. Ceramics International, 39(6), 6237-6249.
    DOI Scopus19 WoS14
    2013 Yin, L., Lymer, R., Billiau, N., Peng, Z., & Stoll, R. (2013). Damage morphology produced in low-cycle high-load indentations of feldspar porcelain and leucite glass ceramic. Journal of Materials Science, 48(22), 7902-7912.
    DOI Scopus2 WoS2
    2013 Song, X. F., Peng, J. H., Yin, L., & Lin, B. (2013). A machining science approach to dental cutting of glass ceramics using an electric handpiece and diamond burs. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 135(1), 011014-1-011014-6.
    DOI Scopus11 WoS8
    2012 Wang, M., Peng, Z., Watson, J. A., Watson, G. S., & Yin, L. (2012). Nanoscale study of cartilage surfaces using atomic force microscopy. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226(12), 899-910.
    DOI Scopus11 WoS11 Europe PMC5
    2012 Yinn, L. (2012). Property-process relations in simulated clinical abrasive adjusting of dental ceramics. Journal of the Mechanical Behavior of Biomedical Materials, 16(1), 55-65.
    DOI Scopus28 WoS27 Europe PMC10
    2012 Yin, L., Venkatesan, S., Webb, D., Kalyanasundaram, S., & Qin, Q. (2012). 2D and 3D mapping of microindentations in hydrated and dehydrated cortical bones using confocal laser scanning microscopy. Journal of Materials Science, 47(10), 4432-4438.
    DOI Scopus4 WoS4
    2012 Song, X. F., & Yin, L. (2012). Surface morphology and fracture in handpiece adjusting of a leucite-reinforced glass ceramic with coarse diamond burs. Materials Science and Engineering: A, 534, 193-202.
    DOI Scopus25 WoS18
    2011 Brodie, G., Harris, G., Jacob, M. V., Sheehan, M., & Yin, L. (2011). Microwave modification of sugar cane to enhance juice extraction during milling. Journal of Microwave Power and Electromagnetic Energy, 45(4), 178-187.
    DOI Scopus8 WoS10 Europe PMC1
    2011 Brodie, G., Jacob, M. V., Sheehan, M., Yin, L., Cushion, M., & Harris, G. (2011). Microwave modification of sugar cane to enhance juice extraction during milling. International Sugar Journal, 113(1354), 714-718.
    2011 Yin, L., & Song, X. F. (2011). Grindability of dental ceramics in the in vitro oral regime. International Journal of Abrasive Technology, 4(3), 204-222.
    DOI Scopus3
    2011 Peng, J., Song, X., & Yin, L. (2011). Forecasting of cutting forces in dental adjustment of ceramic prostheses using an artificial neural network. Advanced Materials Research, 152-153, 1687-1690.
    DOI Scopus2 WoS1
    2010 Song, X. F., & Yin, L. (2010). Induced damage zone in micro-fine dental finishing of a feldspathic porcelain. Medical Engineering and Physics, 32(5), 417-422.
    DOI Scopus13 WoS9 Europe PMC5
    2010 Yin, L., Venkatesan, S., Kalyanasundaram, S., & Qin, Q. H. (2010). Influence of enzymatic maceration on the microstructure and microhardness of compact bone. Biomedical Materials, 5(1), 6 pages.
    DOI Scopus6 WoS6 Europe PMC1
    2010 Song, X. F., & Yin, L. (2010). FEA-predicted subsurface damage in micro finishing of a feldspar porcelain using fine-grit dental burs. Key Engineering Materials, 443, 562-566.
    DOI
    2010 Song, X. F., & Yin, L. (2010). Stress and damage at the bur-prosthesis interface in dental adjustments of a leucite-reinforced glass ceramic. Journal of Oral Rehabilitation, 37(9), 680-691.
    DOI Scopus17 WoS13 Europe PMC2
    2010 Song, X. F., & Yin, L. (2010). The quantitative effect of diamond grit size on the subsurface damage induced in dental adjustment of porcelain surfaces. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 224(10), 1185-1194.
    DOI Scopus22 WoS17 Europe PMC3
    2010 Mulligan, R., Yin, L., Lamont, A., Peng, Z., Forwood, M. R., & Teoh, S. H. (2010). Effect of penetration rate on insertion force in trabecular bone biopsy. Materials Science Forum, 654-656, 2225-2228.
    DOI Scopus2 WoS2
    2010 Lymer, R., Yin, L., Peng, Z., Jones, R. H. B., & Sandham, A. (2010). Surface roughness and stress responses of a feldspar porcelain to fatigue impact. Key Engineering Materials, 443, 557-561.
    DOI
    2010 Allen, C., Peng, Z., Yin, L., & Carmichael, E. (2010). Nano-hardness testing of wear particles in sheep knee joints. Materials Science Forum, 654-656, 2253-2256.
    DOI
    2009 Yin, L., Venkatesan, S., Kalyanasundaram, S., & Qin, Q. H. (2009). Effect of microstructure on micromechanical performance of dry cortical bone tissues. Materials Characterization, 60(12), 1424-1431.
    DOI Scopus9 WoS7
    2009 Song, X. F., Yin, L., & Han, Y. G. (2009). In-process assessment of dental cutting of a leucite-reinforced glass-ceramic. Medical Engineering and Physics, 31(2), 214-220.
    DOI Scopus19 WoS14 Europe PMC3
    2009 Song, X. F., & Yin, L. (2009). Subsurface damage induced in dental resurfacing of a feldspar porcelain with coarse diamond burs. Journal of Biomechanics, 42(3), 355-360.
    DOI Scopus30 WoS23 Europe PMC8
    2009 Yin, L. (2009). Abrasive technology in ceramic restorative dentistry. Advanced Materials Research, 76-78, 363-366.
    DOI
    2009 Yin, L., Venkatesan, S., Webb, D., Kalyanasundaram, S., & Qin, Q. H. (2009). Effect of cryo-induced microcracks on microindentation of hydrated cortical bone tissue. Materials Characterization, 60(8), 783-791.
    DOI Scopus13 WoS12
    2008 Song, X. F., Yin, L., Han, Y. G., & Li, J. (2008). Finite element analysis of subsurface damage of ceramic prostheses in simulated intraoral dental resurfacing. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 85(1), 50-59.
    DOI Scopus19 Europe PMC5
    2008 Song, X. F., Yin, L., Han, Y. G., & Wang, H. (2008). In vitro rapid intraoral adjustment of porcelain prostheses using a high-speed dental handpiece. Acta Biomaterialia, 4(2), 414-424.
    DOI Scopus32 Europe PMC9
    2008 Yin, L., & Huang, H. (2008). Brittle materials in nano-abrasive fabrication of optical mirror-surfaces. Precision Engineering, 32(4), 336-341.
    DOI Scopus47
    2008 Song, X. F., & Yin, L. (2008). Numerical prediction of influence of diamond burs on subsurface damage in intraoral adjustments of porcelain prostheses. Advanced Materials Research, 32, 203-206.
    DOI
    2008 Venkatesan, S., Yin, L., Kalyanasundaram, S., & Qin, Q. H. (2008). A study on the real time strain measurement system for analysis of strain evolution and failure behavior of cortical bone materials. Materials Forum, 33, 46-52.
    2008 Song, X. F., Yin, L., Han, Y. G., & Wang, H. (2008). Micro-fine finishing of a feldspar porcelain for dental prostheses. Medical Engineering and Physics, 30(7), 856-864.
    DOI Scopus13
    2007 Yin, L., Han, Y. G., Song, X. F., & Wang, H. (2007). Effect of diamond burs on process and damage involving in vitro dental resurfacing of a restorative porcelain. Journal of Physics D: Applied Physics, 40(17), 5291-5300.
    DOI Scopus15
    2007 Ramesh, K., Lewis, W. G., Yin, L., & Zhou, F. F. (2007). Linear grinding of microbores using diamond-adhered wire. Materials and Manufacturing Processes, 22(2), 271-276.
    DOI Scopus6
    2007 Yan, X., Han, Y., Song, X., & Yin, L. (2007). Study on surface roughness of feldspar porcelain of in vitro intra - oral dental abrasive finishing. Jingangshi yu Moliao Moju Gongcheng/Diamond and Abrasives Engineering, (1), 60-63.
    Scopus3
    2007 Song, Y. L., Li, J., Yin, L., Huang, T., & Gao, P. (2007). The feature-based posterior crown design in a dental CAD/CAM system. International Journal of Advanced Manufacturing Technology, 31(11-12), 1058-1065.
    DOI Scopus27
    2007 Huang, H., & Yin, L. (2007). Grinding characteristics of engineering ceramics in high speed regime. International Journal of Abrasive Technology, 1(1), 78-93.
    DOI Scopus25
    2007 Yin, L., Han, Y. G., Song, X. F., Li, J., & Wang, H. (2007). In vitro study on high rotation deep removal of ceramic prostheses in dental surgery. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 82(2), 334-345.
    DOI Scopus15 Europe PMC2
    2006 Yin, L., Song, X. F., Song, Y. L., Huang, T., & Li, J. (2006). An overview of in vitro abrasive finishing & CAD/CAM of bioceramics in restorative dentistry. International Journal of Machine Tools and Manufacture, 46(9), 1013-1026.
    DOI Scopus98
    2006 Yin, L., Song, X. F., Qu, S. F., Han, Y. G., & Wang, H. (2006). Surface integrity and removal mechanism in simulated dental finishing of a feldspathic porcelain. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 79(2), 365-378.
    DOI Scopus43 Europe PMC7
    2006 Yin, L., Song, X. F., Qu, S. F., Huang, T., Mei, J. P., Yang, Z. Y., & Li, J. (2006). Performance evaluation of a dental handpiece in simulation of clinical finishing using a novel 2DOF in vitro apparatus. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220(8), 929-938.
    DOI Scopus32 Europe PMC9
    2006 Huang, H., & Yin, L. (2006). An experimental investigation of fabrication mechanisms of optic fibre end faces using nano/microindentation and nanogrinding. International Journal of Nanomanufacturing, 1(1), 47-61.
    DOI Scopus3
    2005 Yin, L., Huang, H., & Chen, W. K. (2005). Influences of nanoscale abrasive suspensions on the polishing of fiber-optic connectors. International Journal of Advanced Manufacturing Technology, 25(7-8), 685-690.
    DOI Scopus9
    2005 Chen, W. K., Huang, H., & Yin, L. (2005). Loose abrasive truing and dressing of resin bond diamond cup wheels for grinding fibre optic connectors. Journal of Materials Processing Technology, 159(2), 229-239.
    DOI Scopus17
    2005 Yin, L., Huang, H., Ramesh, K., & Huang, T. (2005). High speed versus conventional grinding in high removal rate machining of alumina and alumina-titania. International Journal of Machine Tools and Manufacture, 45(7-8), 897-907.
    DOI Scopus73
    2005 Yin, L., Pickering, J. P., Ramesh, K., Huang, H., Spowage, A. C., & Vancoille, E. Y. J. (2005). Planar nanogrinding of a fine grained WC-Co composite for an optical surface finish. International Journal of Advanced Manufacturing Technology, 26(7-8), 766-773.
    DOI Scopus16
    2004 Yin, L., Vancoille, E. Y. J., Ramesh, K., Huang, H., Pickering, J. P., & Spowage, A. C. (2004). Ultraprecision grinding of tungsten carbide for spherical mirrors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218(4), 419-429.
    DOI Scopus21
    2004 Yin, L., Ramesh, K., Wan, S., Liu, X. D., Huang, H., & Liu, Y. C. (2004). Abrasive flow polishing of micro bores. Materials and Manufacturing Processes, 19(2), 187-207.
    DOI Scopus33
    2004 Ramesh, K., Huang, H., & Yin, L. (2004). Analytical and experimental investigation of coolant velocity in high speed grinding. International Journal of Machine Tools and Manufacture, 44(10), 1069-1076.
    DOI Scopus61
    2004 Yin, L., Vancoille, E. Y. J., Ramesh, K., & Huang, H. (2004). Surface characterization of 6H-SiC (0001) substrates in indentation and abrasive machining. International Journal of Machine Tools and Manufacture, 44(6), 607-615.
    DOI Scopus91
    2004 Yin, L., Ives, L. K., & Jahanmir, S. (2004). Effects of fluids on the simulated clinical-dental machining of a glass ceramic. Journal of the American Ceramic Society, 87(1), 173-175.
    DOI Scopus23
    2004 Ramesh, K., Huang, H., Yin, L., & Yui, A. (2004). Surface waviness controlled grinding of thin mold inserts using chilled air as coolant. Materials and Manufacturing Processes, 19(2), 341-354.
    DOI Scopus5
    2004 Yin, L., & Huang, H. (2004). Grindability of glass-inlaid zirconia for fibre-optic connectors. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218(12), 1861-1868.
    DOI Scopus6
    2004 Huang, H., Yin, L., Chen, W. K., & Xiong, Z. (2004). Ultraprecision Abrasive Machining of Fibre Optic Connectors. Key Engineering Materials, 257-258, 171-176.
    DOI Scopus2
    2004 Yin, L., Huang, H., Chen, W. K., Xiong, Z., Liu, Y. C., & Teo, P. L. (2004). Polishing of fiber optic connectors. International Journal of Machine Tools and Manufacture, 44(6), 659-668.
    DOI Scopus29
    2004 Yin, L., & Huang, H. (2004). Ceramic response to high speed grinding. Machining Science and Technology, 8(1), 21-37.
    DOI Scopus80
    2004 Yin, L., Spowage, A. C., Ramesh, K., Huang, H., Pickering, J. P., & Vancoille, E. Y. J. (2004). Influence of microstructure on ultraprecision grinding of cemented carbides. International Journal of Machine Tools and Manufacture, 44(5), 533-543.
    DOI Scopus97
    2004 Yin, L., Vancoille, E. Y. J., Lee, L. C., Huang, H., Ramesh, K., & Liu, X. D. (2004). High-quality grinding of polycrystalline silicon carbide spherical surfaces. Wear, 256(1-2), 197-207.
    DOI Scopus84
    2004 Ramesh, K., Huang, H., Yin, L., & Zhao, J. (2004). Microgrinding of deep micro grooves with high table reversal speed. International Journal of Machine Tools and Manufacture, 44(1), 39-49.
    DOI Scopus14
    2004 Huang, H., Chen, W. K., Yin, L., Xiong, Z., Liu, Y. C., & Teo, P. L. (2004). Micro/meso ultra precision grinding of fibre optic connectors. Precision Engineering, 28(1), 95-105.
    DOI Scopus31
    2003 Huang, H., Yin, L., & Zhou, L. (2003). High speed grinding of silicon nitride with resin bond diamond wheels. Journal of Materials Processing Technology, 141(3), 329-336.
    DOI Scopus107
    2003 Yin, L., Jahanmir, S., & Ives, L. K. (2003). Abrasive machining of porcelain and zirconia with a dental handpiece. Wear, 255(7-12), 975-989.
    DOI Scopus114
    2003 Yin, L., Vancoille, E. Y. J., Lee, L. C., Liu, Y. C., Huang, H., & Ramesh, K. (2003). High-precision low-damage grinding of polycrystalline SiC. Key Engineering Materials, 238-239, 59-64.
    DOI Scopus8
    2001 Yin, L., Ives, L. K., Jahanmir, S., Rekow, E. D., & Romberg, E. (2001). Abrasive machining of glass-infiltrated alumina with diamond burs. Machining Science and Technology, 5(1), 43-61.
    DOI Scopus50
    2000 Dong, X., Yin, L., Jahanmir, S., Ives, L. K., & Rekow, E. D. (2000). Abrasive machining of glass-ceramics with a dental handpiece. Machining Science and Technology, 4(2), 209-233.
    DOI Scopus52
    1997 Yin, L., Marinescu, I., Matsuo, T., & Chen, R. (1997). Investigation of material removal mode in ceramics grinding. Technical Paper - Society of Manufacturing Engineers. MR, 97(178).
    1997 Yin, L., Marinescu, I., & Matsuo, T. (1997). Experimental model of ceramics grinding. Technical Paper - Society of Manufacturing Engineers. MR, 97(219).

  • Book Chapters
    Year Citation
    2024 Juri, A. Z., Basak, A. K., & Yin, L. (2024). Fracture Behaviour of Zirconia-Reinforced Lithium Silicate Glass–Ceramic Composite. In Springer Proceedings in Materials (Vol. 40, pp. 319-325). Springer Nature Singapore.
    DOI
    2018 Yin, L., & Stoll, R. (2018). Ceramics in restorative dentistry. In I. M. Low (Ed.), Advances in Ceramic Matrix Composites: Second Edition (pp. 711-740). Elsevier.
    DOI
    2017 Yin, L., Song, X., & Stoll, R. (2017). Clinical resurfacing of feldspar and leucite glass ceramics using dental handpieces and burs. In Q. Li, & Y. -W. Mai (Eds.), Biomaterials for Implants and Scaffolds (Vol. 8, pp. 163-194). Germany: Springer-Verlag.
    DOI
    2014 Yin, L., & Stoll, R. (2014). Ceramics in restorative dentistry. In Advances in Ceramic Matrix Composites (pp. 624-655). Elsevier.
    DOI Scopus11
    2011 Huang, H., Zhou, L., & Yin, L. (2011). Polishing using flexible abrasive tools and loose abrasives. In Machining with Abrasives (pp. 345-384). Springer US.
    DOI Scopus4

  • Conference Papers
    Year Citation
    2017 Yin, L., Nakanishi, Y., Alao, A. R., Song, X. F., Abduo, J., & Zhang, Y. (2017). A Review of Engineered Zirconia Surfaces in Biomedical Applications. In Procedia CIRP Vol. 65 (pp. 284-290). Chicago: ELSEVIER SCIENCE BV.
    DOI Scopus64 WoS44 Europe PMC17
    2017 Yin, L., & Song, X. (2017). Fracture damage: A bottleneck in glass ceramic machining. In Optics InfoBase Conference Papers Vol. Part F50-Freeform 2017 (pp. 1-2). Denver: OSA.
    DOI
    2016 Yin, L., Song, X., Alao, A., & Stoll, R. (2016). Manufacturing reliable ceramic crowns-The role of abrasive machining in digital dentistry. In ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016 Vol. 1 (pp. 1-8). Online: ASME.
    DOI Scopus2 WoS2
    2014 Pushparatnam, S., Peng, Z., Wu, J., & Yin, L. (2014). Abrasive wear behaviour of machinable lithium disilicate glass ceramic. In 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014 (pp. 185-190). Online: Engineers Australia.
    Scopus1
    2014 Smith, C. M., & Yin, L. (2014). Nanoindentation studies on lithium disilicate glass ceramics. In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 Vol. 4 (pp. 2825-2831).
    2012 Song, X. F., Peng, J., Yin, L., & Lin, B. (2012). In vitro dental cutting of feldspar and leucite glass ceramics using an electric handpiece. In ASME 2012 International Manufacturing Science and Engineering Conference Collocated with the 40th North American Manufacturing Research Conference and in Participation with the Int. Conf., MSEC 2012 (pp. 43-49). American Society of Mechanical Engineers.
    DOI
    2012 Peng, Z., Wang, M., & Yin, L. (2012). Investigation of nano-mechanical properties of cartilages of sheep knee joints. In Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012 (pp. 315-321).
    2012 Yin, L., Singh, P., Brodie, G., Sheehan, M., & Jacob, M. V. (2012). Influence of microwave energy on mechanical strength in sugarcane. In Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012 (pp. 754-758).
    Scopus2
    2011 Brodie, G., Jacob, M. V., Sheehan, M., Yin, L., Cushion, M., & Harris, G. (2011). Microwave modification of sugar cane to enhance juice extraction during milling. In 33rd Annual Conference of the Australian Society of Sugar Cane Technologists 2011, ASSCT 2011 (pp. 392-399).
    2008 Yin, L., & Huang, H. (2008). Surface topography in mechanical polishing of 6H-SiC (0001) substrate. In A. J. Hariz, & V. K. Varadan (Eds.), Proceedings of SPIE - The International Society for Optical Engineering Vol. 6798. SPIE.
    DOI Scopus1
    2006 Yin, L., Li, J., Song, Y., Song, X., Han, Y., & Gao, P. (2006). Computer-aided design and in vitro intra-oral finishing of bioceramics in dentistry. In Optics InfoBase Conference Papers. OSA.
    DOI
    2006 Yin, L., & Huang, H. (2006). Material response to micro/nano abrasive processes for optical mirrors. In Optics InfoBase Conference Papers. OSA.
    DOI
    2006 Yin, L., Li, J., Song, Y., Song, X., Han, Y., & Gao, P. (2006). Computer-aided design and in vitro intra-oral finishing of bioceramics in dentistry. In Optics InfoBase Conference Papers.
    2006 Yin, L., & Huang, H. (2006). Material response to micro/nano abrasive processes for optical mirrors. In Optics InfoBase Conference Papers.
    2003 Yin, L., Ives, L. K., & Jahanmir, S. (2003). Influence of grinding fluids on the abrasive machining of a micaceous glass ceramic. In Ceramic Engineering and Science Proceedings Vol. 24 (pp. 191-196). John Wiley & Sons, Inc..
    DOI Scopus2

The NCP Program, Department of Foreign Affairs and Trade, Australia (2021) Grant No. NCPST Japan 32939. 

The NCP Program, Department of Foreign Affairs and Trade, Australia (2020) Grant No. NCPST Singapore 31168.   

The Grants-in-Aid for Scientific Research <KAKENHI> Promotion of Joint International Research (Fostering Joint International Research B), the Japan Society for the Promotion of Science, Japan (2019-2024) Grant ID 17401.

MECH ENG 2020 Materials & Manufacturing  

MECH ENG 3026/7067 Advanced Mechanics of Materials   

CHEM ENG 1009 Materials 1

  • Current Higher Degree by Research Supervision (University of Adelaide)
    Date Role Research Topic Program Degree Type Student Load Student Name
    2023 Principal Supervisor Multiscale Mechanical and Materials Characterisation of 3D-Printed Titanium Alloy Doctor of Philosophy Doctorate Full Time Mr Md. Bengir Ahmed Shuvho
    2022 Co-Supervisor “Synthesis and analysis of novel composite materials comprising fungal mycelium and industrial hemp biomass” Doctor of Philosophy Doctorate Part Time Alex James Clare
    2021 Co-Supervisor Bio-inspired soft robotics for lunar and planetary missions Doctor of Philosophy Doctorate Full Time Mr William Stephen Foster-Hall
    2020 Co-Supervisor 3D Printing and resurfacing of Corrosion Resistant Metals, Microstructure-Process-Behaviour Relations Doctor of Philosophy Doctorate Part Time Mr Andrew Michael Sales

  • Past Higher Degree by Research Supervision (University of Adelaide)
    Date Role Research Topic Program Degree Type Student Load Student Name
    2019 - 2022 Principal Supervisor In-situ Micro and Nanomechanical Characterization and Ultrasonic Machining of Zirconia Ceramics Doctor of Philosophy Doctorate Full Time Miss Afifah Zakiyyah Juri
  • Position: Associate Professor/Reader
  • Phone: 83133197
  • Email: ling.yin@adelaide.edu.au
  • Campus: North Terrace
  • Building: Engineering South, floor 3
  • Org Unit: Mechanical Engineering
Connect With Me
External Profiles