Dr Togay Ozbakkaloglu

Togay Ozbakkaloglu
Senior Lecturer
School of Civil, Environmental and Mining Engineering
Faculty of Engineering, Computer and Mathematical Sciences

Dr Togay Ozbakkaloglu received his PhD from the University of Ottawa, Canada in 2005. Dr Ozbakkaloglu's research focuses on the development of new technologies to improve the reliability and performance of civil infrastructure. His specific expertise concerns the development and modelling of: i) special concretes, including high-performance concretes and waste-based green concretes and ii) sustainable and resilient fiber reinforced polymer (FRP)–concrete composite structural systems.

Dr Ozbakkaloglu has published over 180 peer-reviewed research articles, including ~100 papers published in the leading journals and >80 international conference papers. In addition to being the Associate Editor for the ASCE Journal of Structural Engineering, Dr Ozbakkaloglu is the Editor-in-Chief of the Journal of Recent Patents on Engineering, Regional Editor of the Open Construction & Building Technology Journal, and Associate Editor for the Australian Journal of Civil Engineering. He also serves on the Editorial Board of 10 international journals.

Dr Ozbakkaloglu regularly contributes to international conferences through invited and keynote lectures, and he been a member of the International Scientific Committee in over 50 international conferences. He also serves as an invited reviewer for international funding bodies and over 60 SCI journals.

Connect With Me

External Profiles

Dr Togay Ozbakkaloglu

Dr Togay Ozbakkaloglu received his PhD from the University of Ottawa, Canada in 2005. Dr Ozbakkaloglu's research focuses on the development of new technologies to improve the reliability and performance of civil infrastructure. His specific expertise concerns the development and modelling of: i) special concretes, including high-performance concretes and waste-based green concretes and ii) sustainable and resilient fiber reinforced polymer (FRP)–concrete composite structural systems.

Dr Ozbakkaloglu has published over 180 peer-reviewed research articles, including ~100 papers published in the leading journals and >80 international conference papers. In addition to being the Associate Editor for the ASCE Journal of Structural Engineering, Dr Ozbakkaloglu is the Editor-in-Chief of the Journal of Recent Patents on Engineering, Regional Editor of the Open Construction & Building Technology Journal, and Associate Editor for the Australian Journal of Civil Engineering. He also serves on the Editorial Board of 10 international journals.

Dr Ozbakkaloglu regularly contributes to international conferences through invited and keynote lectures, and he been a member of the International Scientific Committee in over 50 international conferences. He also serves as an invited reviewer for international funding bodies and over 60 SCI journals.

Research Highlights

Publications: Over 180 peer-reviewed research articles, including ~100 journal papers published in the leading journals and more than 80 international conference papers, 2 edited conference proceedings, and 1 edited journal special issue

Citations: >2100 Scopus citations leading to a Scopus h-index of h=26 (as of 12/17)

 

Research Interests

Use of advanced composite materials in design, repair, and strengthening of concrete structures to enhance reliability and performance of civil infrastructure

Enhancing structural sustainability through development and application of high-performance and eco-efficient construction materials

Design of structures for improved resilience against earthquakes and other extreme events

Experimental testing of concrete and composite structures and their components

Behaviour and design of high-performance fibre-reinforced polymer (FRP)–concrete composite columns

Development of energy-efficient waste-based concretes using green binders and recycled aggregates

Development of smart and high-performance infrastructure materials, such as SMA-confined concretes and concretes incorporating fibres, nanoparticles, and graphene

Constitutive modelling of concrete under constant and varying lateral confinement pressure

 

Selected Scholarly Activities

Editor-in-Chief, Journal of Recent Patents on Engineering (2016-present)

Regional Editor, Open Construction & Building Technology Journal (2016-present)

Associate Editor, Journal of Structural Engineering, ASCE (recognized as the leading Structural Engineering journal; 2016-present) and Australian Journal of Civil Engineering, Engineers Australia (2009-present)

Lead Guest Editor, International Journal of Polymer Science, Special Issue on “Applications of Fiber Reinforced Polymer Composites” (2014-2015)

Member of Editorial Board of 10 international journals, including the SCI journals International Journal of Concrete Structures and Materials, Advances in Civil Engineering, Coupled Systems Mechanics, and Journal of Zhejiang University-Science A

Executive Committee Member and Adelaide Chapter Director, Australian Association for Steel-Concrete Composite Structures (AASCCS)

Management Committee Member, International Centre for Composites in Infrastructure (ICCI)

Invited reviewer for 50+ SCI journals (>70 paper reviews per year)

International grant reviewer: Research Grants Council of Hong Kong, Swiss National Science Foundation, National Science Centre of Poland, Czech Science Foundation, and Chilean National Science and Technology Commission

Delivered over 35 keynote and invited presentations at conferences/symposia/forums/workshops

Co-chair of 3 and scientific committee member of over 40 international conferences

Appointments

Date Position Institution name
2017 - 2018 NSFC Visiting Scholar Southeast University
2010 Senior Lecturer University of Adelaide
2006 - 2009 Lecturer (Level B) University of Adelaide

Awards and Achievements

Date Type Title Institution Name Country Amount
2017 Fellowship National Natural Science Foundation of China (NSFC) Research Fellowship for Distinguished International Young Scientists
2017 Invitation Keynote Address, International Symposium on New and Advanced Materials and Technologies for Energy, Environment and Sustainable Development
2016 Invitation Keynote Address, International Conference on Architectural Engineering and Civil Engineering
2016 Invitation Keynote Address, International Conference on Material, Power and Energy Engineering,

Education

Date Institution name Country Title
2000 - 2005 University of Ottawa Canada PhD
1994 - 1998 Istanbul Technical University, Istanbul Turkey BSc

Research Interests

Journals

Year Citation
2018 Mansouri, I., Gholampour, A., Kisi, O., & Ozbakkaloglu, T. (2018). Evaluation of peak and residual conditions of actively confined concrete using neuro-fuzzy and neural computing techniques. Neural Computing and Applications, 29(3), 873-888.
DOI Scopus12 WoS1
2018 Ozbakkaloglu, T., Gholampour, A., & Xie, T. (2018). Mechanical and durability properties of recycled aggregate concrete: Effect of recycled aggregate properties and content. Journal of Materials in Civil Engineering, 30(2), 04017275-1-04017275-13.
DOI Scopus2
2018 Khotbehsara, M., Miyandehi, B., Naseri, F., Ozbakkaloglu, T., Jafari, F., & Mohseni, E. (2018). Effect of SnO<inf>2</inf>, ZrO<inf>2</inf>, and CaCO<inf>3</inf>nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: Experimental observations and ANFIS predictions. Construction and Building Materials, 158, 823-834.
DOI
2018 Gholampour, A., & Ozbakkaloglu, T. (2018). Behavior of steel fiber-reinforced concrete-filled FRP tube columns: Experimental results and a finite element model. Composite Structures, 194, 252-262.
DOI
2018 Gholampour, A., & Ozbakkaloglu, T. (2018). Time-dependent and long-term mechanical properties of concretes incorporating different grades of coarse recycled concrete aggregates. Engineering Structures, 157, 224-234.
DOI Scopus1
2018 Fallah Pour, A., Gholampour, A., & Ozbakkaloglu, T. (2018). Influence of the measurement method on axial strains of FRP-confined concrete under compression. Composite Structures, 188, 415-424.
DOI
2018 Jafari, K., Tabatabaeian, M., Joshaghani, A., & Ozbakkaloglu, T. (2018). Optimizing the mixture design of polymer concrete: An experimental investigation. Construction and Building Materials, 167, 185-196.
DOI
2018 Xu, J., Chen, Z., Ozbakkaloglu, T., Zhao, X., & Demartino, C. (2018). A critical assessment of the compressive behavior of reinforced recycled aggregate concrete columns. Engineering Structures, 161, 161-175.
DOI
2017 Ozbakkaloglu, T., & Saatcioglu, M. (2017). Displacement-based model to predict lateral drift capacities of concrete-filled FRP tube columns. Engineering Structures, 147, 345-355.
DOI Scopus1 WoS1
2017 Gholampour, A., & Ozbakkaloglu, T. (2017). Performance of sustainable concretes containing very high volume Class-F fly ash and ground granulated blast furnace slag. Journal of Cleaner Production, 162, 1407-1417.
DOI Scopus4 WoS4
2017 Ozbakkaloglu, T., Gu, L., & Gholampour, A. (2017). Short-term mechanical properties of concrete containing recycled polypropylene coarse aggregates under ambient and elevated temperature. Journal of Materials in Civil Engineering, 29(10), 10 pages.
DOI
2017 Gholampour, A., Valizadeh Kiamahalleh, M., Tran, D., Ozbakkaloglu, T., & Losic, D. (2017). From graphene oxide to reduced graphene oxide: impact on the physiochemical and mechanical properties of graphene-cement composites. ACS Applied Materials and Interfaces, 9(49), 43275-43286.
DOI Scopus1
2017 Vincent, T., & Ozbakkaloglu, T. (2017). Lateral Strain-To-Axial Strain Model for Concrete-Filled FRP Tube Columns Incorporating Interface Gap and Prestressed Confinement. Journal of Composites for Construction, 21(5), 13 pages.
DOI Scopus1
2017 Gholampour, A., Kiamahalleh, M., Tran, D., Ozbakkaloglu, T., & Losic, D. (2017). Revealing the dependence of the physiochemical and mechanical properties of cement composites on graphene oxide concentration. RSC Advances, 7(87), 55148-55156.
DOI Scopus1 WoS1
2017 Zheng, J., & Ozbakkaloglu, T. (2017). Sustainable FRP–recycled aggregate concrete–steel composite columns: Behavior of circular and square columns under axial compression. Thin-Walled Structures, 120, 60-69.
DOI
2017 Afroughsabet, V., Biolzi, L., & Ozbakkaloglu, T. (2017). Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete. Composite Structures, 181, 273-284.
DOI Scopus6 WoS3
2017 Khotbehsara, M., Mohseni, E., Ozbakkaloglu, T., & Ranjbar, M. (2017). Durability characteristics of self-compacting concrete incorporating pumice and metakaolin. Journal of Materials in Civil Engineering, 29(11), 9 pages.
DOI Scopus4 WoS3
2017 Bai, Y., Dai, J., & Ozbakkaloglu, T. (2017). Cyclic stress-strain model incorporating buckling effect for steel reinforcing bars embedded in FRP-confined concrete. Composite Structures, 182, 54-66.
DOI
2017 Gholampour, A., Ozbakkaloglu, T., & Hassanli, R. (2017). Behavior of rubberized concrete under active confinement. Construction and Building Materials, 138, 372-382.
DOI Scopus2 WoS2
2017 Keshtegar, B., Ozbakkaloglu, T., & Gholampour, A. (2017). Modeling the behavior of FRP-confined concrete using dynamic harmony search algorithm. Engineering with Computers, 33(3), 415-430.
DOI Scopus5 WoS7
2017 Gholampour, A., Gandomi, A., & Ozbakkaloglu, T. (2017). New formulations for mechanical properties of recycled aggregate concrete using gene expression programming. Construction and Building Materials, 130, 122-145.
DOI Scopus10 WoS9
2017 Ozbakkaloglu, T., Fang, C., & Gholampour, A. (2017). Influence of FRP anchor configuration on the behavior of FRP plates externally bonded on concrete members. Engineering Structures, 133, 133-150.
DOI Scopus2 WoS1
2017 Keshtegar, B., Sadeghian, P., Gholampour, A., & Ozbakkaloglu, T. (2017). Nonlinear modeling of ultimate strength and strain of FRP-confined concrete using chaos control method. Composite Structures, 163, 423-431.
DOI Scopus3 WoS2
2016 Ozbakkaloglu, T., Gu, L., & Fallah Pour, A. (2016). Normal- and high-strength concretes incorporating air-cooled blast furnace slag coarse aggregates: effect of slag size and content on the behavior. Construction and Building Materials, 126, 138-146.
DOI Scopus4 WoS4
2016 Afroughsabet, V., Biolzi, L., & Ozbakkaloglu, T. (2016). High-performance fiber-reinforced concrete: a review. Journal of Materials Science, 51(14), 6517-6551.
DOI Scopus17 WoS16
2016 Idris, Y., & Ozbakkaloglu, T. (2016). Behavior of square fiber reinforced polymer-high-strength concrete-steel double-skin tubular columns under combined axial compression and reversed-cyclic lateral loading. Engineering Structures, 118, 307-319.
DOI Scopus14 WoS12
2016 Ozbakkaloglu, T., & Xie, T. (2016). Geopolymer concrete-filled FRP tubes: behavior of circular and square columns under axial compression. Composites Part B: Engineering, 96, 215-230.
DOI Scopus11 WoS9
2016 Ozbakkaloglu, T., Gholampour, A., & Lim, J. (2016). Damage-plasticity model for FRP-confined normal-strength and high-strength concrete. Journal of Composites for Construction, 20(6), 04016053-1-04016053-13.
DOI Scopus8 WoS4
2016 Lim, J. C., Ozbakkaloglu, T., Gholampour, A., Bennett, T., & Sadeghi, R. (2016). Finite-element modeling of actively confined normal-strength and high-strength concrete under uniaxial, biaxial, and triaxial compression. Journal of Structural Engineering, 142(11), 04016113-1-04016113-12.
DOI Scopus8 WoS6
2016 Mansouri, I., Ozbakkaloglu, T., Kisi, O., & Xie, T. (2016). Predicting behavior of FRP-confined concrete using neuro fuzzy, neural network, multivariate adaptive regression splines and M5 model tree techniques. Materials and Structures/Materiaux et Constructions, 49(10), 4319-4334.
DOI Scopus12 WoS11
2016 Xie, T., & Ozbakkaloglu, T. (2016). Behavior of recycled aggregate concrete-filled basalt and carbon FRP tubes. Construction and Building Materials, 105, 132-143.
DOI Scopus18 WoS13
2016 Lim, J., & Ozbakkaloglu, T. (2016). Influence of size and slenderness on compressive strain softening of confined and unconfined concrete. Journal of Materials in Civil Engineering, 28(2), 7 pages.
DOI Scopus4 WoS2
2016 Ozbakkaloglu, T., Chen, J. F., Smith, S. T., & Dai, J. G. (2016). Applications of fiber reinforced polymer composites. International Journal of Polymer Science, 2016, 5804145-1.
DOI Scopus1 WoS1
2016 Gu, L., & Ozbakkaloglu, T. (2016). Use of recycled plastics in concrete: A critical review. Waste Management, 51, 19-42.
DOI Scopus29 WoS20
2016 Ozbakkaloglu, T., Fanggi, B., & Zheng, J. (2016). Confinement model for concrete in circular and square FRP-concrete-steel double-skin composite columns. Materials and Design, 96, 458-469.
DOI Scopus6 WoS4
2016 Chen, L., & Ozbakkaloglu, T. (2016). Corner strengthening of square and rectangular concrete-filled FRP tubes. Engineering Structures, 117, 486-495.
DOI Scopus13 WoS9
2016 Lim, J. C., & Ozbakkaloglu, T. (2016). Confinement Model for FRP-Confined High-Strength Concrete (vol 18, 2014). JOURNAL OF COMPOSITES FOR CONSTRUCTION, 20(6), 1 page.
DOI
2016 Vincent, T., & Ozbakkaloglu, T. (2016). Influence of overlap configuration on compressive behavior of CFRP-confined normal- and high-strength concrete. Materials and Structures/Materiaux et Constructions, 49(4), 1245-1268.
DOI Scopus10 WoS8
2016 Jian C. Lim., Karakus, M., & Ozbakkaloglu, T. (2016). Evaluation of ultimate conditions of FRP-confined concrete columns using genetic programming. Computers and Structures, 162, 28-37.
DOI Scopus4 WoS5
2015 Xie, T., & Ozbakkaloglu, T. (2015). Influence of coal ash properties on compressive behaviour of FA- and BA-based GPC. Magazine of Concrete Research, 67(24), 1301-1314.
DOI Scopus6 WoS3
2015 Lim, J., & Ozbakkaloglu, T. (2015). Unified Stress-Strain Model for FRP and Actively Confined Normal-Strength and High-Strength Concrete. Journal of Composites for Construction, 19(4), 04014072-1-04014072-14.
DOI Scopus24 WoS17
2015 Vincent, T., & Ozbakkaloglu, T. (2015). Compressive behavior of prestressed high-strength concrete-filled aramid FRP tube columns: experimental observations. Journal of Composites for Construction, 19(6), 04015003-1-04015003-13.
DOI Scopus18 WoS10
2015 Afroughsabet, V., & Ozbakkaloglu, T. (2015). Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers. Construction and Building Materials, 94, 73-82.
DOI Scopus51 WoS41
2015 Lim, J. C., & Ozbakkaloglu, T. (2015). Investigation of the Influence of the Application Path of Confining Pressure: Tests on Actively Confined and FRP-Confined Concretes. Journal of Structural Engineering (United States), 141(8), 04014203-1-04014203-12.
DOI Scopus25 WoS19
2015 Ozbakkaloglu, T. (2015). A novel FRP-dual-grade concrete-steel composite column system. Thin-Walled Structures, 96, 295-306.
DOI Scopus13 WoS11
2015 Lim, J. C., & Ozbakkaloglu, T. (2015). Influence of concrete age on stress–strain behavior of FRP-confined normal- and high-strength concrete. Construction and Building Materials, 82, 61-70.
DOI Scopus13 WoS9
2015 Xie, T., & Ozbakkaloglu, T. (2015). Behavior of steel fiber-reinforced high-strength concrete-filled FRP tube columns under axial compression. Engineering Structures, 90, 158-171.
DOI Scopus31 WoS24
2015 Louk Fanggi, B. A., & Ozbakkaloglu, T. (2015). Square FRP-HSC-steel composite columns: Behavior under axial compression. Engineering Structures, 92, 156-171.
DOI Scopus18 WoS14
2015 Idris, Y., & Ozbakkaloglu, T. (2015). Flexural behavior of FRP-HSC-steel double skin tubular beams under reversed-cyclic loading. Thin-Walled Structures, 87, 89-101.
DOI Scopus17 WoS13
2015 Vincent, T., & Ozbakkaloglu, T. (2015). Influence of shrinkage on compressive behavior of concrete-filled FRP tubes: An experimental study on interface gap effect. Construction and Building Materials, 75, 144-156.
DOI Scopus18 WoS15
2015 Vincent, T., & Ozbakkaloglu, T. (2015). Influence of Slenderness on Stress-Strain Behavior of Concrete-Filled FRP Tubes: Experimental Study. Journal of Composites for Construction, 19(1), 04014029-1-04014029-13.
DOI Scopus18 WoS14
2015 Xie, T., & Ozbakkaloglu, T. (2015). Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature. Ceramics International, 41(1), 5945-5958.
DOI Scopus33 WoS25
2015 Lim, J. C., & Ozbakkaloglu, T. (2015). Lateral strain-to-axial strain relationship of confined concrete. Journal of Structural Engineering, 141(5), 04014141-1-04014141-18.
DOI Scopus43 WoS38
2015 Albitar, M., Ozbakkaloglu, T., & Louk Fanggi, B. A. (2015). Behavior of FRP-HSC-steel double-skin tubular columns under cyclic axial compression. Journal of Composites for Construction, 19(2), 1-13.
DOI Scopus13 WoS7
2015 Lim, J., & Ozbakkaloglu, T. (2015). Hoop strains in FRP-confined concrete columns: experimental observations. Materials and Structures, 48(9), 2839-2854.
DOI Scopus30 WoS27
2015 Fanggi, L., & Ozbakkaloglu, T. (2015). Behavior of Hollow and Concrete-Filled FRP-HSC and FRP-HSC-Steel Composite Columns Subjected to Concentric Compression. Advances in Structural Engineering: an international journal, 18(5), 715-738.
DOI Scopus16 WoS12
2015 Ozbakkaloglu, T., & Louk Fanggi, B. (2015). FRP-HSC-steel composite columns: behavior under monotonic and cyclic axial compression. Materials and Structures, 48(4), 1075-1093.
DOI Scopus23 WoS24
2014 Idris, Y., & Ozbakkaloglu, T. (2014). Flexural behavior of FRP-HSC-steel composite beams. Thin-Walled Structures, 80, 207-216.
DOI Scopus26 WoS19
2014 Ozbakkaloglu, T., & Louk Fanggi, B. (2014). Axial compressive behavior of FRP-concrete-steel double-skin tubular columns made of normal- and high-strength concrete. Journal of Composites for Construction, 18(1), 04013027-1-04013027-13.
DOI Scopus40 WoS37
2014 Ozbakkaloglu, T., & Idris, Y. (2014). Seismic behavior of FRP-high-strength concrete–steel double-skin tubular columns. Journal of Structural Engineering, 140(6), 04014019-1-04014019-14.
DOI Scopus40 WoS35
2014 Lim, J. C., & Ozbakkaloglu, T. (2014). Confinement Model for FRP-Confined High-Strength Concrete. Journal of Composites for Construction, 18(4), 04013058-1-04013058-19.
DOI Scopus73 WoS71
2014 Lim, J., & Ozbakkaloglu, T. (2014). Influence of silica fume on stress-strain behavior of FRP-confined HSC. Construction and Building Materials, 63, 11-24.
DOI Scopus28 WoS30
2014 Ozbakkaloglu, T., & Vincent, T. (2014). Axial compressive behavior of circular high-strength concrete-filled FRP tubes. Journal of Composites for Construction, 18(2), 04013037-1-04013037-11.
DOI Scopus56 WoS61
2014 Ozbakkaloglu, T. (2014). Relative Performance of FRP-Concrete-Steel Double Skin Tubular Columns versus Solid and Hollow Concrete-Filled FRP Tubes. Applied Mechanics and Materials, 501, 3-7.
DOI
2014 Lim, J., & Ozbakkaloglu, T. (2014). Design model for FRP-confined normal-and high-strength concrete square and rectangular columns. Magazine of Concrete Research, 66(20), 1020-1035.
DOI Scopus28 WoS22
2014 Lim, J., & Ozbakkaloglu, T. (2014). Stress–strain model for normal-and light-weight concretes under uniaxial and triaxial compression. Construction and Building Materials, 71, 492-509.
DOI Scopus32 WoS28
2014 Vincent, T., & Ozbakkaloglu, T. (2014). Axial compressive behaviour of FRP-confined concrete columns: investigation of less-understood influences. Concrete in Australia, 40(2), 37-45.
2013 Vincent, T., & Ozbakkaloglu, T. (2013). Influence of fiber orientation and specimen end condition on axial' compressive behavior of FRP-confined concrete. CONSTRUCTION AND BUILDING MATERIALS, 47, 814-826.
DOI WoS70
2013 Idris, Y., & Ozbakkaloglu, T. (2013). Seismic behavior of high-strength concrete-filled FRP tube columns. Journal of Composites for Construction, 17(6), 1-13.
DOI Scopus65 WoS63
2013 Louk Fanggi, B., & Ozbakkaloglu, T. (2013). Compressive behavior of aramid FRP-HSC-steel double-skin tubular columns. Construction and Building Materials, 48, 554-565.
DOI Scopus32 WoS32
2013 Ozbakkaloglu, T., & Lim, J. (2013). Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model. Composites Part B-Engineering, 55, 607-634.
DOI Scopus96 WoS91
2013 Ozbakkaloglu, T. (2013). Behavior of square and rectangular ultra high-strength concrete-filled FRP tubes under axial compression. Composites Part B-Engineering, 54(1), 97-111.
DOI Scopus59 WoS56
2013 Vincent, T., & Ozbakkaloglu, T. (2013). Influence of fiber orientation and specimen end condition on axial compressive behavior of FRP-confined concrete. Construction and Building Materials, 47, 814-826.
DOI Scopus67
2013 Vincent, T., & Ozbakkaloglu, T. (2013). Influence of concrete strength and confinement method on axial compressive behavior of FRP confined high- and ultra high-strength concrete. Composites Part B-Engineering, 50, 413-428.
DOI Scopus90 WoS86
2013 Ozbakkaloglu, T., Lim, J., & Vincent, T. (2013). FRP-confined concrete in circular sections: Review and assessment of stress-strain models. Engineering Structures, 49, 1068-1088.
DOI Scopus179 WoS164
2013 Ozbakkaloglu, T. (2013). Concrete-filled FRP tubes: Manufacture and testing of new forms designed for improved performance. Journal of Composites for Construction, 17(2), 280-291.
DOI Scopus41 WoS45
2013 Ozbakkaloglu, T. (2013). Axial compressive behavior of square and rectangular high-strength concrete-filled FRP tubes. Journal of Composites for Construction, 17(1), 151-161.
DOI Scopus75 WoS68
2013 Ozbakkaloglu, T. (2013). Compressive behavior of concrete-filled FRP tube columns: Assessment of critical column parameters. Engineering Structures, 51, 188-199.
DOI Scopus79 WoS75
2012 Ozbakkaloglu, T., & Akin, E. (2012). Behavior of FRP-confined normal- and high-strength concrete under cyclic axial compression. Journal of Composites for Construction, 16(4), 451-463.
DOI Scopus101 WoS91
2011 Vincent, T., Ozbakkaloglu, T., Seracino, R., & Kaggwa, G. (2011). Influence of variations in concrete material properties on the serviceability of reinforced and prestressed concrete flexural members. Engineering Structures, 33(1), 99-106.
DOI WoS1
2010 Vincent, T., Ozbakkaloglu, T., & Seracino, R. (2010). A case study of partially pre-stressed multi-storey building incorporating fast-track construction. Australian Journal of Civil Engineering, 8(1), 27-39.
2009 Putra, H., Ngothai, Y., Ozbakkaloglu, T., & Seracino, R. (2009). Mineral filler reinforcement for commingled recycled-plastic materials. Journal of Applied Polymer Science, 112(6), 3470-3481.
DOI Scopus9 WoS8
2009 Ozbakkaloglu, T., & Saatcioglu, M. (2009). Tensile Behavior of FRP Anchors in Concrete. Journal of Composites for Construction, 13(2), 82-92.
DOI Scopus42 WoS35
2009 Saatcioglu, M., Ozbakkaloglu, T., Naumoski, N., & Lloyd, A. (2009). Response of earthquake-resistant reinforced-concrete buildings to blast loading. Canadian Journal of Civil Engineering, 36(8), 1378-1390.
DOI Scopus7 WoS3
2009 Saatcioglu, M., Ozbakkaloglu, T., Naumoski, N., & Lloyd, A. (2009). Response of earthquake-resistant reinforced-concrete buildings to blast loading This article is one of a selection of papers published in the Special Issue on Blast Engineering.. Canadian Journal of Civil Engineering, 36, 1378-1390.
2008 Ozbakkaloglu, T., Lim, J. C., & Griffith, M. C. (2008). FRP–confined high–strength concrete under axial cyclic compression. Proc. of the 4th International Conference on FRP Composites in Civil Engineering (CICE 2008), 22-24.
2008 Saatcioglu, M., Ozbakkaloglu, T., & Elnabelsy, G. (2008). Seismic behavior and design of reinforced concrete columns confined with FRP stay-in-place formwork. ACI Structural Journal, 257, 149-170.
2008 Daniell, J., Oehlers, D., Griffith, M., Mohamed Sadakkathulla, M., & Ozbakkaloglu, T. (2008). The softening rotation of reinforced concrete members. Engineering Structures, 30(11), 3159-3166.
DOI Scopus20 WoS18
2008 Ozbakkaloglu, T., & Oehlers, D. (2008). Manufacture and testing of a novel FRP tube confinement system. Engineering Structures, 30(9), 2448-2459.
DOI Scopus54 WoS53
2008 Ozbakkaloglu, T., & Oehlers, D. (2008). Concrete-filled square and rectangular FRP tubes under axial compression. Journal of Composites for Construction, 12(4), 469-477.
DOI Scopus72 WoS63
2007 Ravet, F., Zou, L., Bao, X., Ozbakkaloglu, T., Saatcioglu, M., & Zhou, J. (2007). Distributed Brillouin sensor for structural health monitoring. Canadian Journal of Civil Engineering, 34(3), 291-297.
DOI Scopus11
2007 Ozbakkaloglu, T., & Saatcioglu, M. (2007). Seismic performance of square high-strength concrete columns in FRP stay-in-place formwork. Journal of Structural Engineering-ASCE, 133(1), 44-56.
DOI Scopus84
2006 Ozbakkaloglu, T., & Saatcioglu, M. (2006). Seismic behavior of high-strength concrete columns confined by fiber-reinforced polymer tubes. Journal of Composites for Construction, 10(6), 538-549.
DOI Scopus104
2006 Ravet, F., Bao, X., Ozbakkaloglu, T., & Saatcioglu, M. (2006). Signature of structure failure using asymmetric and broadening factors of brillouin spectrum. IEEE Photonics Technology Letters, 18(1-4), 394-396.
DOI Scopus18
2005 Ozbakkaloglu, T., & Saatcioglu, M. (2005). SP-230-90: FRP Stay-in-Place Formwork for Seismic Resistant High-Strength Concrete Columns. ACI SPECIAL PUBLICATIONS, 230, 1593.
2004 Ozbakkaloglu, T., & Saatcioglu, M. (2004). Rectangular Stress Block for High-Strength Concrete. ACI Structural Journal, 101(4), 475-483.
Scopus44
Kashyap, J., Ozbakkaloglu, T., & Griffith, M. C. (n.d.). The Earthquake Engineering Online Archive NISEE e-Library.

Conference Papers

Year Citation
2018 Vincent, T., & Ozbakkaloglu, T. (2018). Development of Lateral Prestress in High-Strength Concrete-Filled FRP Tubes. In IOP Conference Series: Materials Science and Engineering Vol. 307.
DOI
2017 Gholampour, A., Ozbakkaloglu, T., & Hassanli, R. (2017). Use of fine rubber particles as fine concrete aggregates in actively confined concrete. In Key Engineering Materials Vol. 729 (pp. 122-127).
DOI
2017 Vincent, T., & Ozbakkaloglu, T. (2017). Lateral strain-to-axial strain model for laterally prestressed concrete-filled FRP tubes. In Key Engineering Materials Vol. 729 (pp. 134-138).
DOI
2017 Gholampour, A., & Ozbakkaloglu, T. (2017). Finite element analysis of constitutive behavior of FRP-confined steel fiber reinforced concrete. In Key Engineering Materials Vol. 737 KEM (pp. 511-516).
DOI
2017 Vincent, T., & Ozbakkaloglu, T. (2017). Predicting strain reduction factor for concrete-filled FRP tube columns incorporating interface gap and prestress. In Solid State Phenomena Vol. 263 SSP (pp. 18-23).
DOI
2017 Gholampour, A., & Ozbakkaloglu, T. (2017). Finite element modeling of FRP-confined concrete using extended damage-plasticity approach. In M. Noor, V. Mani, M. Ganesh, & M. Idris (Eds.), IOP Conference Series: Materials Science and Engineering Vol. 225 (pp. 1DUMMY). Narsimha Reddy Engn Coll, INDIA: IOP PUBLISHING LTD.
DOI
2017 Vincent, T., & Ozbakkaloglu, T. (2017). An Experimental Study on Shrinkage Strains of Normal-and High-Strength Concrete-Filled Frp Tubes. In IOP Conference Series: Materials Science and Engineering Vol. 230 (pp. 6 pages). Barcelona, SPAIN: IOP PUBLISHING LTD.
DOI
2016 Xie, T., & Ozbakkaloglu, T. (2016). Microstructure and mechanical properties of ambiently-cured blended coal ash-based geopolymer concrete. In Materials Science Forum Vol. 857 (pp. 400-404).
DOI
2016 Xie, T., & Ozbakkaloglu, T. (2016). Effect of coal ash properties on compressive strength of bottom ash-based geopolymer concrete. In Materials Science Forum Vol. 857 (pp. 395-399).
DOI
2016 Ozbakkaloglu, T. (2016). Reflections on mechanisms affecting the behavior of frp-concrete-Steel double-skin tubular columns. In Key Engineering Materials Vol. 705 (pp. 323-331).
DOI
2015 Fanngi, B., & Ozbakkaloglu, T. (2015). Effect of Inner Steel tube Cross-sectional Shape on Compressive Behavior of Square FRP-Concrete-Steel Double-Skin tubular Columns. In Applied Mechanics and Materials Vol. 752-753 (pp. 578-583). Jeju, South Korea.
2015 Idris, Y., & Ozbakkaloglu, T. (2015). FRF-Concrete-Steel Double Skin Tubular Cantilever Beams: Behavior under Cyclic Loading. In Applied Mechanics and Materials Vol. 752-753 (pp. 572-577). Jeju, South Korea.
2014 Vincent, T., & Ozbakkaloglu, T. (2014). Influence of Slenderness on Behavior of High-Strength Concrete-Filled FRP Tubes under Axial Compression. In Applied Mechanics and Materials Vol. 501-504 (pp. 963-968). Kunming, PEOPLES R CHINA: TRANS TECH PUBLICATIONS LTD.
DOI
2014 Xie, T., & Ozbakkaloglu, T. (2014). Compressive Behavior of Steel Fiber Reinforced Concrete-Filled FRP Tubes. In Proceedings of the 13th International Symposium on Structural Engineering (ISSE-13 (pp. 48-55). Hefei, China: SCIENCE PRESS BEIJING.
2014 Lim, J. C., & Ozbakkaloglu, T. (2014). A Unified Stress-Strain Model for Unconfined and Actively Confined Concrete. In Proceedings of the 13th International Symposium on Structural Engineering (pp. 808-816). Hefei, China: SCIENCE PRESS BEIJING.
2014 Vincent, T., & Ozbakkaloglu, T. (2014). The Influence of Overlap Regions on Axial Behaviour of Concrete-Filled FRP Tubes. In Proceedings of the 13th International Symposium on Structural Engineering (ISSE-13) (pp. 450-457). Hefei, China: SCIENCE PRESS BEIJING.
2014 Louk Fanggi, B. A., & Ozbakkaloglu, T. (2014). Influence of Concrete and FRP Tube Properties on Behavior of FRP-Concrete-Steel Double-Skin Tubular Columns Subjected to Cyclic Axial Compression. In Proceedings of the 13th International Symposium on Structural Engineering (ISSE-13) (pp. 572-580). Hefei, China: SCIENCE PRESS BEIJING.
2014 Lim, J., & Ozbakkaloglu, T. (2014). An accurate stress-strain model for FRP-confined concrete based on a novel approach. In Proceedings of the 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23) (pp. 1-6). Byron Bay, Australia.
2014 Vincent, T., & Ozbakkaloglu, T. (2014). An experimental study on the effect of shrinkage on compressive behavior of high-strength concrete-filled FRP tubes. In 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23) (pp. 1-6). Byron Bay, Australia.
2014 Ozbakkaloglu, T. (2014). Influence of Concrete-Filling Inner Steel Tube on Compressive Behavior of Double-Skin Tubular Columns. In Advanced Materials Research Vol. 838 (pp. 535-539). Shenzhen, PEOPLES R CHINA: TRANS TECH PUBLICATIONS LTD.
DOI Scopus1 WoS1
2014 Vincent, T., & Ozbakkloglu, T. (2014). Variation of Hoop Strains in Concrete-Filled FRP Tubes with Concrete Strength, Amount of Confinement and Specimen Slenderness. In Applied Mechanics and Materials Vol. 501 (pp. 977-982). Kunming, PEOPLES R CHINA: Trans Tech Publ.
DOI
2014 Idris, Y., & Ozbakkloglu, T. (2014). Flexural Behavior of Hybrid Double-Skin-Tubular Beams. In X. Zhang, B. Zhang, L. Jiang, & M. Xie (Eds.), Advanced Materials Research Vol. 838 (pp. 525-529). Shenzhen, PEOPLES R CHINA: Trans Tech Publ.
DOI
2014 Lim, J. C., & Ozbakkaloglu, T. (2014). Factors influencing hoop rupture strains of FRP-confined concrete. In Applied Mechanics and Materials Vol. 501 (pp. 949-953). Kunming, PEOPLES R CHINA: Trans Tech Publications.
DOI Scopus5 WoS5
2014 Ozbakkaloglu, T. (2014). Ultra-high-strength concrete-filled FRP tubes: compression tests on square and rectangular columns. In S. Liu, & X. H. Yuan (Eds.), Recent Highlights in Advanced Materials Vol. 575-576 (pp. 239-244). Zhejiang, China: Trans Tech Publications.
DOI
2014 Vincent, T., & Ozbakkaloglu, T. (2014). Axial strains in FRP-confined normal-and high-strength concrete: an examination of strain measurement methods. In Advanced Materials Research Vol. 919-921 (pp. 23-28). Guangzhou, PEOPLES R CHINA: Tech Publications.
DOI
2014 Lim, J. C., & Ozbakkaloglu, T. (2014). Comparison of Stress-Strain Relationships of FRP and Actively Confined High-Strength Concrete: Experimental Observations. In Advanced Materials Research Vol. 919 (pp. 29-34). Guangzhou, PEOPLES R CHINA: TRANS TECH PUBLICATIONS LTD.
DOI Scopus1 WoS1
2014 Fanggi, L., Alfonsius, B., & Ozbakkaloglu, T. (2014). Effect of Loading Pattern on Performance of FRP-HSC-Steel Double Skin Tubular Columns. In Advanced Materials Research Vol. 919 (pp. 83-87). Kuala Lumpur: TRANS TECH PUBLICATIONS LTD.
DOI
2013 Lim, J., & Ozbakkaloglu, T. (2013). Influence of silica fume on stress-strain behavior of FRP-confined HSC. In Proceedings of the 4th Asia-Pacific Conference on FRP in Structures, APFIS 2013 (pp. 8-1-8-6). online: Swinburne University of Technology.
2013 Lim, J., & Ozbakkaloglu, T. (2013). A confinement model for FRP-confined normal and high-strength concrete in square and rectangular sections. In Proceedings of the 4th Asia-Pacific Conference on FRP in Structures, APFIS 2013 (pp. 1-6). online: International Institute for FRP in Construction.
2013 Lim, J., & Ozbakkaloglu, T. (2013). FRP-confined high-strength concrete in circular sections: summary of test database and a new design-oriented model. In Proceedings of the 11th International Symposium on Fiber Reinforced Polymer For Reinforced Concrete Structures, FRPRCS-11 (pp. 1-10). Portugal: Universidade do Minho.
2013 Lim, J., & Ozbakkaloglu, T. (2013). Dilation behavior of FRP-confined concrete. In J. Barros, & J. Sena-Cruz (Eds.), FRPRCS-ll: 11th International Symposium on Fiber Reinforced Polymer for Reinforced Concrete Structures (pp. 1-10). Portugal: Universidade do Minho.
2013 Ozbakkaloglu, T., & Louk Fanggi, B. (2013). An experimental study on behvior of FRP-HSC-Steel double-skin tubular columns under concentric compression. In H. Hou, & L. Tian (Eds.), Applied Mechanics and Materials - Vols 357-360 Vol. 357-360 (pp. 565-569). Switzerland: Trans Tech Publications Ltd..
DOI
2013 Vincent, T., & Ozbakkaloglu, T. (2013). An Experimental Study on the Compressive Behavior of CFRP-Confined High- and Ultra High-Strength Concrete. In Y. Huang, T. Bao, & H. Wang (Eds.), Advanced Materials Research - Vols 671-674 Vol. 671-674 (pp. 1860-1864). Switzerland: Trans Tech Publications Ltd.
DOI
2013 Vincent, T., & Ozbakkaloglu, T. (2013). Axial Compressive Behavior of High- and Ultra High-Strength Concrete-Filled AFRP Tubes. In Y. Huang, T. Bao, & H. Wang (Eds.), Advanced Materials Research - Vols 671-674 Vol. 671-674 (pp. 626-631). Switzerland: Trans Tech Publications Ltd..
DOI
2013 Vincent, T., & Ozbakkaloglu, T. (2013). The effect of confinement method and specimen end condition on behavior of FRP-confined concrete under concentric compression. In T. Li (Ed.), Applied Mechanics and Materials Vol. 351-352 (pp. 650-653). Switzerland: Trans Tech Publications Ltd..
DOI Scopus1 WoS1
2013 Vincent, T., & Ozbakkaloglu, T. (2013). Influence of fiber type on behavior of high-strength concrete-filled FRP tubes under concentric compression. In Proceedings of the 2013 International Conference on Civil Engineering, Architecture and Sustainable Infrastructure, ICCEASI 2013 Vol. 438-439 (pp. 240-245). China: Trans Tech Publications.
DOI Scopus2
2013 Louk Fanggi, B., & Ozbakkaloglu, T. (2013). Influence of inner steel tube properties on compressive behavior of FRP-HSC-steel double-skin tubular columns. In Applied Mechanics and Materials Vol. 438-439 (pp. 701-705). Switzerland: Trans Tech Publications.
DOI
2013 Idris, Y., & Ozbakkaloglu, T. (2013). Behavior of high-strength concrete-filled FRP tube columns under simulated seismic loading: An experimental study. In B. Xu, & H. Y. Li (Eds.), Advanced Materials Research - Vol 743 Vol. 743 (pp. 39-44). Switzerland: Trans Tech Publications Ltd..
DOI
2013 Lim, J., & Ozbakkaloglu, T. (2013). A simple design-oriented model for FRP-confined high-strength concrete. In B. Xu, & H. Y. Li (Eds.), Advanced Materials Research - Vol 743 Vol. 743 (pp. 45-49). Switzerland: Trans Tech Publications Ltd..
DOI
2013 Ozbakkaloglu, T. (2013). Concrete-filled FRP tubes: New forms for improved confinement effectiveness. In X. D. Zhang, H. N. Li, X. T. Feng, & Z. H. Chen (Eds.), Proceedings of the 2nd International Conference on Civil Engineering and Transportation, ICCET 2012 Vol. 256-259 (pp. 657-661). Switzerland: TransTech Publications.
DOI
2012 Ozbakkaloglu, T., & Zhang, W. (2012). Investigation of key column parameters on compressive behavior of concrete-filled FRP tubes. In X. Zhang, H. Li, X. Feng, & Z. Chen (Eds.), Proceedings of the 2nd International Conference on Civil Engineering and Transportation, CET 2012 Vol. 256-259 (pp. 779-783). Switzerland: TransTech Publications.
DOI
2012 Ozbakkaloglu, T. (2012). Compressive behavior of square and rectangular high-strength concrete-filled FRP tubes. In Proceedings of the 12th International Symposium on Structural Engineering (ISSE-12) (pp. 965-970). Beijing: Science Press.
2012 Ozbakkaloglu, T., Shokouhian, M., & Sadeghi, R. (2012). Buckling behaviour of knee braced frames (KBF). In Proceedings of the 2012 Australasian Structural Engineering Conference, ASEC 2012 (pp. 1-8). online: Engineers Australia.
2012 Idris, Y., & Ozbakkaloglu, T. (2012). Seismic behavior of FRP-concrete-steel double skin tubular columns. In Proceedings of the 12th International Symposium on Structural Engineering (ISSE-12) (pp. 1201-1207). Beijing: Science Press.
2009 Vincent, T., & Ozbakkaloglu, T. (2009). Influence of concrete strength and fibre type on the compressive behaviour of FRP-confined high-strength concrete. In Proceedings of FRPRCS-9 (pp. 1-4). Australia: FRPRCS-9.
2009 Wu, C., Ozbakkaloglu, T., Ma, G., & Huang, Z. (2009). Numerical simulation of performance of concrete-filled FRP tubes under impact loading. In G. Ma, & Y. Zhou (Eds.), Analysis of Discontinuous Deformation: New Developements and Applications (pp. 675-685). Singapore: Research Publishing Services.
DOI
2009 Wu, C., Ozbakkaloglu, T., Huang, Z., & Ma, G. (2009). Experimental investigation of FRP confined reinforced concrete under impact loads. In Proceedings of the 8th International Conference on Shock & Impact Loads on Structures (pp. 715-719). Australia: Premier Conference.
2009 Ngothai, Y., Putra, H., Ozbakkaloglu, T., & Seracino, R. (2009). Effect of CaCO3 size on the mechanical properties of recycled HDPE. In Proceedings of the 8th World Congress of Chemical Engineering (pp. 1-6). Canada: The Canadian Society for Chemical Engineers.
2009 Li, K., Ngothai, Y., Ozbakkaloglu, T., & Jollands, M. (2009). Weathering effects on composites of recycled low density polyethylene with fine talc. In Proceedings of CHEMECA 2009 (pp. 1-10). Australia: Engineers Australia.
2008 Saatcioglu, M., Ozbakkaloglu, T., & Elnabelsy, G. (2008). Seismic behavior and design of reinforced concrete columns confined with FRP stay-in-place formwork. In American Concrete Institute, ACI Special Publication (pp. 145-165).
Scopus27
2008 Kashyap, J., Griffith, M., & Ozbakkaloglu, T. (2008). Seismic behaviour of reinforced concrete frames in Australia. In J. Wilson (Ed.), Proceedings of the Australian Earthquake Engineering Society 2008 Conference (pp. 1-9). Australia: AEES.
2008 Ozbakkaloglu, T., Lim, J., & Oehlers, D. (2008). Confinement effectiveness of rectangular concrete-filled FRP tubes. In Proceedings of the Fourth International Conference on FRP Composites in Civil Engineering (pp. 1-6). CD: EMPA.
2008 Ozbakkaloglu, T., Lim, J., & Griffith, M. (2008). FRP-confined high-strength concrete under axial cyclic compression. In Proceedings of the Fourth International Conference on FRP Composites in Civil Engineering (pp. 1-6). CD: EMOA.
2008 Ngothai, Y., Ozbakkaloglu, T., Seracino, R., & Sze, A. (2008). Effects of fillers on the flexural and tensile properties of recycled high density polyethylene. In Proceedings of the Chemeca 2008 Conference (pp. 1-10). CD: Engineers Australia.
2008 Ngothai, Y., Kit, M., Ozbakkaloglu, T., & Seracino, R. (2008). A study on the mechanincal properties of the combination of glass fibre and mineral fillers for reinforcing recycled low density polyethylene. In G. Jameson (Ed.), Proceeding of the Chemeca 2008 Conference (pp. 1829-1838). CD: Engineers Australia.
2007 Ozbakkaloglu, T., Lim, J., & Oehlers, D. (2007). Concrete-filled square FRP tubes under axial compression. In S. T. Smith (Ed.), Proceedings of APFIS 2007 (pp. 119-124). Hong Kong: International Institute for FRP in Construction.
2007 Oehlers, D., Mohamed Sadakkathulla, M., Griffith, M., & Ozbakkaloglu, T. (2007). Fundamental issues that govern the rotation of FRP retrofitted RC columns and beams: The intractable plastic hinge ductility problem. In S. T. Smith (Ed.), Proceedings of APFIS 2007 (pp. 23-32). Hong Kong: International Institute for FRP in Construction.
2007 Ozbakkaloglu, T., & Oehlers, D. (2007). Behavior of Axially Loaded Concrete Filled Rectangular FRP Tubes. In T. C. Triantafilou (Ed.), Fiber-reinforced polymer reinforcement for concrete structures: FRPRCS-8 / International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete (pp. 1-10). Greece: University of Patras.
2007 Ozbakkaloglu, T., Saatcioglu, M., & Foo, S. (2007). Performance and Design of FRP Anchors. In T. C. Triantafilou (Ed.), Fiber-reinforced polymer reinforcement for concrete structures: FRPRCS-8 / International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete (pp. 1-10). Greece: University of Patras.
2006 Ozbakkaloglu, T., & Saatcioglu, M. (2006). Comparison of Seismic Performance of HSC Columns Confined by FRP Tubes and Steel Reinforcement. In Australasian Conference on the Mechanics of Structures and Materials (pp. 109-114). Christchurch, New Zealand: Taylor & Francis.
2005 Ozbakkaloglu, T., & Saatcioglu, M. (2005). FRP stay-in-place formwork for seismic resistant high-strength concrete columns. In SP230: 7th International Symposium on Fiber-Reinforced (FRP) Polymer Reinforcement for Concrete Structures Vol. SP-230 (pp. 1593-1612).
2005 Ravet, F., Bao, X., Ozbakkaloglu, T., Majeed, M., Saatcioglu, M., Ferrier, G., . . . Chen, L. (2005). Column structure deformation monitoring with the distributed Brillouin sensor. In M. Voet, R. Willsch, W. Ecke, J. Jones, & B. Culshaw (Eds.), 17th International Conference on Optical Fibre Sensors (pp. 531-534). Online: SPIE.
DOI Scopus1
2005 Foo, S., Naumoski, N., Ozbakkaloglu, T., & Saatcioglu, M. (2005). Floor Response Spectra for Reinforced Concrete Frame Buildings in Canada. In S. E. Chidiac (Ed.), Proceedings of the CIB Co-sponsored 1st Canadian Conference on Effective Design of Structures: Transferring Research into Practice (CCEDS-1) (pp. 157-165). Hamilton, Ontario: McMaster University Centre for Effective Design of Structures.
2005 Ozbakkaloglu, T., & Saatcioglu, M. (2005). Rectangular Stress Block for High-Strength Concrete: A Comparative Study. In S. E. Chidiac (Ed.), Proceedings of the CIB Co-sponsored 1st Canadian Conference on Effective Design of Structures: Transferring Research into Practice (CCEDS-1) (pp. 147-156). Hamilton, Ontario: McMaster University Centre for Effective Design of Structures.
2005 Ozbakkaloglu, T., Naumoski, N., & Saatcioglu, M. (2005). Response of reinforced concrete frame buildings to blast loading. In Proceedings, Annual Conference - Canadian Society for Civil Engineering Vol. 2005.
Scopus1
2005 Ozbakkaloglu, T., & Saatcioglu, M. (2005). Comparisons of seismic performance of high-strength concrete square columns confined by FRP casings and conventional steel reinforcement. In Proceedings, Annual Conference - Canadian Society for Civil Engineering Vol. 2005.
Scopus1
2004 Ozbakkaloglu, T., & Saatcioglu, M. (2004). Seismic Performance of High-Strength Concrete Square Columns in Stay-in-Place FRP Formwork. In 4th International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS IV). Calgary, Canada: Canadian Society for Civil Engineering.
2004 Ozbakkaloglu, T., & Saatcioglu, M. (2004). Seismic performance of high-strength concrete columns cast in stay-in-place FRP formwork. In 13th World Conference on Earthquake Engineering (pp. 1-13). Ottowa, Canada: University of Ottowa.

Conference Items

Year Citation
2012 Shokouhian, M., Sadeghi, R., & Ozbakkaloglu, T. (2012). The Buckling Behaviour of Knee Braced Frames (KBF). Poster session presented at the meeting of Australasian Structural Engineering Conference 2012: The past, present and future of Structural Engineering. Engineers Australia.

(CI: Chief Investigator)

2018            “Large-volume, multi-use micro-computed tomography” Australian Research Council (ARC) Linkage Infrastructure, Equipment and Facilities (LE180100136) (co-CI)

2017            “Mechanical behavior of novel FRP–waste-based concrete composite structural systems under different loading conditions” NSFC Research Fellowship for Distinguished International Young Scientists (Grant No. 51650110495) (Sole CI)

2014-2018   “Cost-effective Mitigation Strategy Development for Building Related Earthquake Risk” Bushfire and Natural Hazards CRC (co-CI)

2015-2016   “Full-scale Testing of FRP-concrete-steel Double-skin Tubular Columns” Tianjin Chengjian University-University of Adelaide Joint Research Centre (Sole CI)

2014            “FRP-HSC-steel Composite Columns” School of CEME Research Excellence Grant (Sole CI)

2013            “Cyclic Behaviour of FRP-confined Concrete Columns” School of CEME Research Excellence Grant (Sole CI)

2012            “State-of-the-art concrete mixer” Faculty of ECMS Competitive Research Grant (Sole CI)

2011-2012   “Full-scale Testing of FRP-concrete Composite Columns” Faculty of ECMS Competitive Core Research Strengths Grant (co-CI)

2010            “Behaviour of Confined Concrete” Faculty of ECMS Competitive Strategic Support Grant (Sole CI)

2009-2010   “Development of Geopolymer Concretes” Parsons Brinckerhoff and Hallett Concrete (Sole CI)

2009            “A Generic Mechanism-based Model for Confined Concrete” Faculty of ECMS Competitive Strategic Support Grant (Sole CI)

2008-2011   “Development of Concrete Canoes” Adelaide Brighton, SIKA, Hanson and Grace Construction Products (Sole CI)

2008            “Axial Cyclic Behaviour of Concrete-filled FRP Tubes” School of CEME Seed Grant (Sole CI)

2007            “Behaviour of Concrete-filled FRP Tubes” Faculty of ECMS Competitive Strategic Support Grant (Sole CI)

2006            “Confinement of Concrete Columns by FRP Composites” Faculty of ECMS Start-up Grant (Sole CI)

2006-2009   “Strengthening of Concrete Beams by FRP Composites” Natural Sciences and Engineering Research Council of Canada (NSERC) Postdoctoral Fellowship (Sole CI) (declined in favor of the Lecturer position at UoA)

University of Adelaide (2006-present)

Advanced Reinforced Concrete              (Level IV and Postgraduate)

Prestressed Concrete Structures            (Level IV and Postgraduate)

Structural Design III-Concrete                 (Level III)

Structural Mechanics IIIA                         (Level III)

Structural Design IIB                                (Level II)

Building Design Studio IV                        (Level IV– School of Architecture)

 

University of Ottawa (2004-2006)

Theory of Structures II                             (Level IV)

Theory of Structures I                              (Level III)

Reinforced Concrete Design I                  (Level III)

Mechanics of Materials I                           (Level II)

Current Higher Degree by Research Supervision (University of Adelaide)

Date Role Research Topic Program Degree Type Student Load Student Name
2016 Principal Supervisor Development of New Structural Systems Using Novel and Eco Efficient Materials Doctor of Philosophy Doctorate Full Time Mr Ali Fallah Pour
2015 Principal Supervisor Behavior of Double Skins Tubular Columns Manufactured with Recycled Aggregate Concrete Doctor of Philosophy Doctorate Part Time Mr Junai Zheng
2015 Principal Supervisor Confinement of Earthquake-Resistant Normal and High Strength Concrete Columns by Fibre Reinforced Polymer Tubes Doctor of Philosophy Doctorate Full Time Mr Aliakbar Gholampour
2014 Co-Supervisor Damage Detection in Composite Structures Using Lamb Wave Based Method Doctor of Philosophy Doctorate Full Time Mr Hasan Mohseni

Past Higher Degree by Research Supervision (University of Adelaide)

Date Role Research Topic Program Degree Type Student Load Student Name
2013 - 2015 Principal Supervisor Development of Novel Concretes for Structural Applications Master of Philosophy Master Full Time Mr Tianyu Xie
2013 - 2017 Co-Supervisor Spectral Finite Element Modelling and Damage Identification of Beam-like Structures Using Linear and Nonlinear Guided Waves Doctor of Philosophy Doctorate Full Time Mr Shuai He
2012 - 2015 Principal Supervisor Axial Compressive Behavior of FRP-Concrete-Steel Double-Skin Tubular Columns Doctor of Philosophy Doctorate Full Time Mr Butje Alfonsius Louk Fanggi
2011 - 2015 Principal Supervisor Axial Compressive Behavior of Actively Confined and FRP-Confined Concretes Doctor of Philosophy Doctorate Full Time Mr Jian Lim
2010 - 2016 Principal Supervisor FRP-Concrete-Steel Composite Structural Members Doctor of Philosophy Doctorate Full Time Ms Yunita Idris
2008 - 2011 Co-Supervisor Environmental Effects on Recycled Plastics Master of Engineering Science Master Full Time Mr Kan Li
2008 - 2015 Principal Supervisor Axial compressive behaviour of FRP-confined high-strength concrete Doctor of Philosophy Doctorate Full Time Mr Thomas Vincent
2006 - 2009 Co-Supervisor Seismic Performance of Reinforced Concrete Frames Master of Engineering Science Master Full Time Ms Jaya Kashyap
2006 - 2009 Principal Supervisor Predictions of Deformations in Post-Tensioned Prestressed Suspended Slabs in Tall Buildings Master of Engineering Science Master Full Time Mr Thomas Vincent
2006 - 2009 Co-Supervisor Optimisation of the Production of Commingled Recycled Plastic Materials Master of Engineering Science Master Full Time Mr Handoko Putra

Editorial Boards

Date Role Editorial Board Name Institution Country
2016 - ongoing Associate Editor Journal of Structural Engineering, ASCE
2016 - ongoing Editor-In-chief Journal of Recent Patents on Engineering
2016 - ongoing Editor Open Construction & Building Technology Journal
2014 - 2015 Editor International Journal of Polymer Science
2009 - ongoing Associate Editor Australian Journal of Civil Engineering
Position
Senior Lecturer
Phone
83136477
Fax
8313 4359
Campus
North Terrace
Building
Engineering North, floor 1
Room Number
1 52
Org Unit
School of Civil, Environmental and Mining Engineering

top