Scott Smith

Professor Scott Smith

Deputy Dean (International)

School of Architecture and Civil Engineering

Faculty of Sciences, Engineering and Technology

Eligible to supervise Masters and PhD - email supervisor to discuss availability.

Professor Scott Smith
BE(Hons) PhD (UNSW) MBA DIC (Imp) GradCertHEd (UTS)
FRSN FRSSA FIEAust FASCE FACI FHKIE FIIFC FIABSE CPEng EngExec IntPE(Aus) NER

Scott Smith is Professor of Structural Engineering in the School of Architecture and Civil Engineering (ACE); Deputy Dean International (DDI) for the Faculty of Sciences, Engineering and Technology (SET); and Chair of Academic Board at The University of Adelaide, Australia. He is also co-Chair of the Transitional Academic Board for Adelaide University. Scott holds degrees in engineering, business, and education via BE (Civil) (1994) and PhD (1999) (specialising in structural engineering) (University of New South Wales, Australia); MBA and DIC (2018) (Imperial College London, UK); Graduate Certificate in Higher Education Teaching and Learning (2005) (University of Technology Sydney, Australia). Prior to commencing at The University of Adelaide in 2019, he has held roles of Founding Dean of Engineering at Southern Cross University, faculty member at The University of Hong Kong, and Postdoctoral Research Fellow at The Hong Kong Polytechnic University.

Professor Smith has been entrusted with several leadership roles throughout his career, such as academic leadership (Deputy Dean International SET Faculty and Interim Head of School of Civil, Environmental and Mining Engineering at the University of Adelaide), research leadership (President, International Institute for FRP in Construction, IIFC), education leadership (Executive Committee member, Australasian Association for Engineering Education, AAEE), industry leadership (Chair, Engineers Australia Hong Kong Chapter), and service leadership (Executive Committee member, Australian Council of Engineering Deans, ACED). In recognition of his contributions to the profession, he has been elected to Fellowships of eight institutions around the world (Engineers Australia; American Concrete Institute; American Society of Civil Engineers; International Association for Bridge and Structural Engineering; Royal Society of NSW; Royal Society of SA; International Institute for FRP in Construction; The Hong Kong Institution of Engineers).

Professor Smith researches in two main complementary areas, namely (i) materials, structures and construction practices for off-earth (extra-terrestrial) applications; and (ii) application of fibre-reinforced polymer (FRP) composites for repair and rehabilitation of existing built infrastructure as well as for new construction. He has published widely in the FRP composites in civil engineering field and has won several research awards such as Distinguished Young Researcher Award from the International Institute for FRP in Construction (IIFC), Warren Medal from Engineers Australia, Howard Medal from the UK Institution of Civil Engineers, as well as best paper awards at conferences. His research findings have been incorporated into design guidelines around the world via prominent organisations such as Standards Australia and the American Concrete Institute (ACI). To support his research activities, he has been awarded research funds in excess of AUD$14 million throughout his career. He has also published over 290 publications and delivered over 340 presentations in a professional capacity

Professor Smith keeps abreast of educational trends and practices, and also contributes to discourse in the sector, as a member of the Executive Committee of the Australian Association for Engineering Education (AAEE). Additionally, he is active in curriculum and pedagogy development in Australian and Hong Kong universities and has delivered a variety of subjects related to analysis and design (concrete, steel, timber) in structural engineering, engineering materials, repair and rehabilitation of the built environment, sustainable development, communication, and research ethics in a lecturing capacity since 2003 and a tutoring capacity since 1995. In recognition of his teaching efforts, he has won a Best Teacher Award from the Faculty of Engineering at The University of Hong Kong, and a Deputy Vice-Chancellor (Academic) Award for Team Excellence from The University of Adelaide.

Professor Smith is Immediate Past President of the International Institute for FRP in Construction (IIFC, https://www.iifc.org/) of which the IIFC is an institute representing over 800 leaders around the world in academia and practice involved with research and application of FRP composites in the built environment. He served as President from 2018 to 2023. He is also Founding President of the Australian Society for Off-Earth Construction (ASOC, https://set.adelaide.edu.au/atcsr/australian-society-for-off-earth-construction), having commenced the Society in 2022. Professor Smith is the originator of two conference series, namely (i) Asia-Pacific Conference on FRP in Structures (APFIS) (founded in 2007) and (ii) International Symposium on Off-Earth Construction (ISOC) (founded in 2022).

Research Interests

Research interests include materials, structures and construction practices for off-earth (extra-terrestrial) applications; and application of fibre-reinforced polymer (FRP) composites for repair and rehabilitation of existing built infrastructure as well as for new construction.

 

4-digit Field of Research (FOR) Codes applicable to expertise:

0905 Civil Engineering

0912 Materials Engineering

0913 Mechanical Engineering

0915 Interdisciplinary Engineering

 

Funding

Research funds awarded in excess of AUD$11 million (i.e. Australian Research Council ARC-Discovery (DP), ARC-Linkage (LP), Industrial Transformation Research Hub (ITRH); Linkage, Infrastructure and Facilities (LIEF); RGC Hong Kong-General Research Fund (GRF); National Natural Science Foundation of China (NSFC); industry; contract research; internal to universities).

 

Visiting Appointments

Distinguished Visiting Professor, Tsinghua University, China (2019-2021)

Short-term Scholar; Columbia University, USA (2011)

 

Conferences

Chair, Ninth Asia-Pacific Conference on FRP in Structures, APFIS 2023, Adelaide, Australia, 1-4 December 2023.

Chair, First International Symposium on Off-Earth Construction, ISOC-1 2022, Adelaide, Australia, 24 October 2022.

Chair, Seventh Asia-Pacific Conference on FRP in Structures, APFIS 2019, Surfers Paradise, Australia, 10-13 December 2019.

Chair, 27th Australasian Association for Engineering Education Conference, AAEE 2016, Coffs Harbour, Australia, 5-7 December 2016.

Chair, 23rd Australasian Conference on the Mechanics of Structures and Materials, ACMSM23, Byron Bay, 9-12 December 2014.

Co-Chair, Fourth Asia-Pacific Conference on FRP in Structures, APFIS 2013, Melbourne, Australia, 11-13 December 2013.

Chair, First Asia-Pacific Conference on FRP in Structures, APFIS 2007, Hong Kong, 12-14 December 2007.

  • Journals
    Year Citation
    2025 Tafsirojjaman, T., Smith, S. T., & Hossain, M. A. (2025). Development of Regolith-Resin-Composite (RRC) Material for Lunar Construction. Acta Astronautica, 228, 652-663.
    DOI Scopus3
    2025 Lee, S., Bennett, T., Smith, S. T., & Kring, D. A. (2025). Stability and form-finding of shelters subjected to moonquakes of the lunar south polar region. Acta Astronautica, 234, 106-116.
    DOI
    2025 Cao, Y., Jiang, C., Ng, C. T., & Smith, S. T. (2025). Thermal damage detection in FRP-strengthened reinforced concrete structures using ultrasonic guided waves. NDT and E International, 152, 103329.
    DOI Scopus3
    2024 Lee, S., Bennett, T., & Smith, S. T. (2024). Rotated Thrust Network Analysis (rTNA) for stability assessment of vaulted structures subjected to horizontal loading. Computers & Structures, 297, 107324.
    DOI Scopus2
    2024 Cao, Y., Hu, X., Ng, C. T., & Smith, S. T. (2024). Diagnostic imaging of debonding in FRP-strengthened reinforced concrete structures using combinational harmonics generated by Rayleigh waves. Engineering Structures, 314, 118377-1-118377-11.
    DOI Scopus6
    2024 Rakib, M. A., Smith, S. T., & Tafsirojjaman, T. (2024). A review of shielding systems for protecting off-earth structures from micrometeoroid and orbital debris impact. Acta Astronautica, 223, 404-425.
    DOI Scopus4
    2024 Feng, Y., Sheikh, A. H., Ng, C. -T., & Smith, S. T. (2024). Dynamic response of delaminated composite and sandwich beams using an efficient sub-lamented based higher order laminate model. Mechanics Based Design of Structures and Machines, 52(8), 5147-5173.
    DOI Scopus2
    2023 Farries, K. W., Visintin, P., & Smith, S. T. (2023). A pilot study of laser-welding cast basalt blocks for lunar construction. Case Studies in Construction Materials, 19, 16 pages.
    DOI Scopus7
    2023 Xue, S., Li, X., Liu, Y., Smith, S. T., Dogar, A. U. R., Li, X., & Tafsirojjaman, T. (2023). A novel winding–wedge anchorage for CFRP straps: Conceptual design and performance evaluation. Case Studies in Construction Materials, 19, e02636.
    DOI Scopus4
    2023 Cao, Y., Ng, C. T., & Smith, S. T. (2023). Debonding detection in FRP-strengthened concrete structures utilising nonlinear Rayleigh wave mixing. Measurement: Journal of the International Measurement Confederation, 214, 10 pages.
    DOI Scopus17
    2023 Ke, Y., Zhang, S. S., Smith, S. T., & Yu, T. (2023). Novel Embedded FRP Anchor for RC Beams Strengthened in Flexure with NSM FRP Bars: Concept and Behavior. Journal of Composites for Construction, 27(1), 15 pages.
    DOI Scopus16 WoS1
    2023 Ghanbari-Ghazijahani, T., Hassanli, R., Manalo, A., Smith, S. T., Vincent, T., Gravina, R., & Zhuge, Y. (2023). Cyclic Behavior of Beam-Column Pocket Connections in GFRP-Reinforced Precast Concrete Assemblages. Journal of Composites for Construction, 27(2), 17 pages.
    DOI Scopus10 WoS1
    2023 Tang, Z. S., Lim, Y. Y., Smith, S. T., Mostafa, A., Lam, A. C., & Soh, C. K. (2023). Monitoring the curing process of in-situ concrete with piezoelectric-based techniques - A practical application. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 22(1), 518-539.
    DOI Scopus28 WoS6
    2023 Feng, Y., Sheikh, A. H., Ng, C. -T., & Smith, S. T. (2023). An efficient modelling technique for simulation of guided waves in delaminated composite and sandwich structures. Journal of Sound and Vibration, 566, 117929-1-117929-22.
    DOI Scopus7
    2022 Farries, K. W., Visintin, P., & Smith, S. T. (2022). Direct laser sintering for lunar dust control: An experimental study of the effect of simulant mineralogy and process parameters on product strength and scalability. Construction and Building Materials, 354, 22 pages.
    DOI Scopus19 WoS2
    2022 Feng, Y., Muni Rami Reddy, R., Sheikh, A. H., Ng, C. -T., & Smith, S. T. (2022). A sub-laminate based higher-order model for bending of laminated beams containing multiple delaminations. Composite Structures, 294, 15 pages.
    DOI Scopus4 WoS1
    2022 Ye, Y. Y., Zhuge, Y., Smith, S. T., Zeng, J. J., & Bai, Y. L. (2022). Behavior of GFRP-RC columns under axial compression: Assessment of existing models and a new axial load-strain model. Journal of Building Engineering, 47, 26 pages.
    DOI Scopus35 WoS14
    2022 Sirach, N., Smith, S. T., Yu, T., & Mostafa, A. (2022). Axial compressive behaviour of circular FRP-confined multi-tube concrete columns. Composite Structures, 281, 19 pages.
    DOI Scopus15 WoS2
    2021 Sirach, N., Smith, S. T., Yu, T., & Mostafa, A. (2021). Experimental Study on the Confinement of Concrete Cylinders with Large Rupture-Strain FRP Composites. Journal of Composites for Construction, 25(4), 04021026-1-04021026-17.
    DOI Scopus27 WoS14
    2021 Ye, Y. Y., Smith, S. T., Zeng, J. J., Zhuge, Y., & Quach, W. M. (2021). Novel ultra-high-performance concrete composite plates reinforced with FRP grid: Development and mechanical behaviour. Composite Structures, 269, 114033.
    DOI Scopus70 WoS33
    2021 Farries, K. W., Visintin, P., Smith, S. T., & van Eyk, P. (2021). Sintered or melted regolith for lunar construction: state-of-the-art review and future research directions. Construction and Building Materials, 296, 1-31.
    DOI Scopus101 WoS15
    2021 Hassanli, R., Vincent, T., Manalo, A., Smith, S. T., Gholampour, A., Gravina, R., & Zhuge, Y. (2021). Connections in GFRP reinforced precast concrete frames. Composite Structures, 276, 19 pages.
    DOI Scopus13 WoS3
    2021 Hassanli, R., Vincent, T., Manalo, A., Smith, S. T., Gholampour, A., & Gravina, R. (2021). Large-scale experimental study on pocket connections in GFRP-reinforced precast concrete frames. Structures, 34, 523-541.
    DOI Scopus18 WoS6
    2021 Zhang, S. S., Ke, Y., Smith, S. T., Zhu, H. P., & Wang, Z. L. (2021). Effect of FRP U-jackets on the behaviour of RC beams strengthened in flexure with NSM CFRP strips. Composite Structures, 256, 113095.
    DOI Scopus61 WoS27
    2021 Cai, Z. K., Yuan, W., Wang, Z., & Smith, S. T. (2021). Seismic behavior of precast segmental bridge columns reinforced with hybrid FRP-steel bars. Engineering Structures, 228, 1-12.
    DOI Scopus47 WoS21
    2021 Lim, Y. Y., Smith, S. T., Padilla, R. V., & Soh, C. K. (2021). Monitoring of concrete curing using the electromechanical impedance technique: review and path forward. Structural Health Monitoring, 20(2), 604-636.
    DOI Scopus71 WoS35
    2020 Zeng, J. J., Ye, Y. Y., Gao, W. Y., Smith, S. T., & Guo, Y. C. (2020). Stress-strain behavior of polyethylene terephthalate fiber-reinforced polymer-confined normal-, high- and ultra high-strength concrete. Journal of Building Engineering, 30, 17 pages.
    DOI Scopus119 WoS75
    2020 Ma, C., Wang, Z., & Smith, S. T. (2020). Seismic Performance of Large-Scale RC Eccentric Corner Beam-Column-Slab Joints Strengthened with CFRP Systems. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 24(2), 17 pages.
    DOI Scopus19 WoS8
    2020 Li, J., Gravina, R. J., Smith, S. T., & Visintin, P. (2020). Bond strength and bond stress-slip analysis of FRP bar to concrete incorporating environmental durability. Construction and Building Materials, 261, 1-12.
    DOI Scopus31 WoS17
    2020 Wu, Y. F., Zhou, Y. W., Hu, B., Huang, X., & Smith, S. (2020). Fused structures for safer and more economical constructions. Frontiers of Structural and Civil Engineering, 14(1), 1-9.
    DOI Scopus11 WoS8
    2020 Yang, J. Q., Smith, S. T., Wang, Z., Feng, P., & Sirach, N. (2020). Modelling of hysteresis behaviour of moment-resisting timber joints strengthened with FRP composites. International Journal of Mechanical Sciences, 179, 17 pages.
    DOI Scopus17 WoS6
    2020 Li, J., Gravina, R., Visintin, P., & Smith, S. T. (2020). Durability and long-term performance of FRP-to-concrete joints under environmental conditioning: experimental and analytical study. Journal of Composites for Construction, 24(4), 1-24.
    DOI Scopus13 WoS6
    2020 Gravina, R. J., Li, J., Smith, S. T., & Visintin, P. (2020). Environmental durability of FRP bar-to-concrete bond: critical review. Journal of Composites for Construction, 24(4), 1-18.
    DOI Scopus48 WoS21
    2020 Yang, J. Q., Smith, S. T., Wu, Y. F., & Feng, P. (2020). Strengthening single-bolt timber joints with externally bonded CFRP composites. Structures, 28, 2671-2685.
    DOI Scopus16 WoS6
    2020 Tang, Z. S., Lim, Y. Y., Smith, S. T., & Padilla, R. V. (2020). Modelling of the electromechanical impedance technique for prediction of elastic modulus of structural adhesives. Structural Health Monitoring, 20(5), 1-16.
    DOI Scopus19 WoS12
    2019 Tang, Z. S., Lim, Y. Y., Smith, S. T., & Izadgoshasb, I. (2019). Development of analytical and numerical models for predicting the mechanical properties of structural adhesives under curing using the PZT-based wave propagation technique. Mechanical Systems and Signal Processing, 128, 172-190.
    DOI Scopus33 WoS22
    2019 Lim, Y. Y., Tang, Z. S., & Smith, S. T. (2019). Piezoelectric-based monitoring of the curing of structural adhesives: A novel experimental study. Smart Materials and Structures, 28(1), 1-19.
    DOI Scopus53 WoS38
    2019 del Rey Castillo, E., Kanitkar, R., Smith, S., Griffith, M., & Ingham, J. (2019). Design approach for FRP spike anchors in FRP-strengthened RC structures. Composite Structures, 214, 23-33.
    DOI Scopus63 WoS24
    2019 Yang, J. Q., Smith, S. T., & Wang, Z. (2019). Seismic behaviour of fibre-reinforced-polymer- and steel-strengthened timber connections. Advances in Structural Engineering, 22(2), 502-518.
    DOI Scopus10 WoS7
    2019 Sturm, A. B., Visintin, P., Vaculik, J., Oehlers, D. J., Seracino, R., & Smith, S. T. (2019). Analytical approach for global load-slip behaviour of FRP plates externally bonded to brittle substrates with anchors. Composites Part B: Engineering, 160, 177-194.
    DOI Scopus14 WoS6
    2018 Visintin, P., & Smith, S. T. (2018). Editorial: Materials development and innovation. Australian Journal of Civil Engineering, 16(2), 79-80.
    DOI
    2018 Kalfat, R., Gadd, J., Al-Mahaidi, R., & Smith, S. T. (2018). An efficiency framework for anchorage devices used to enhance the performance of FRP strengthened RC members. Construction and Building Materials, 191, 354-375.
    DOI Scopus45 WoS26
    2018 Lim, Y. Y., Smith, S. T., & Soh, C. K. (2018). Wave propagation based monitoring of concrete curing using piezoelectric materials: Review and path forward. NDT and E International, 99, 50-63.
    DOI Scopus66 WoS40
    2018 Dias-Da-Costa, D., Graça-E-Costa, R., Ranzi, G., & Smith, S. T. (2018). Assessment of the behavior of FRP-strengthened RC slabs using a discrete crack model. Journal of Composites for Construction, 22(6), 04018045-1-04018045-14.
    DOI Scopus11 WoS8
    2018 Isleem, H. F., Wang, Z., Wang, D., & Smith, S. T. (2018). Monotonic and Cyclic Axial Compressive Behavior of CFRP-Confined Rectangular RC Columns. Journal of Composites for Construction, 22(4), 04018023.
    DOI Scopus49 WoS28
    2018 Yang, J. Q., Smith, S. T., Wang, Z., & Lim, Y. Y. (2018). Numerical simulation of FRP-strengthened RC slabs anchored with FRP anchors. Construction and Building Materials, 172, 735-750.
    DOI Scopus36 WoS17
    2017 Zhang, H., Smith, S. T., Gravina, R. J., & Wang, Z. (2017). Modelling of FRP-concrete bonded interfaces containing FRP anchors. Construction and Building Materials, 139, 394-402.
    DOI Scopus41 WoS25
    2017 Zhang, H., & Smith, S. T. (2017). Influence of plate length and anchor position on FRP-to-concrete joints anchored with FRP anchors. Composite Structures, 159, 615-624.
    DOI Scopus49 WoS37
    2017 Lin, J. P., Wu, Y. F., & Smith, S. T. (2017). Width factor for externally bonded FRP-to-concrete joints. Construction and Building Materials, 155, 818-829.
    DOI Scopus35 WoS22
    2017 Hadigheh, S. A., Gravina, R. J., & Smith, S. T. (2017). Effect of acid attack on FRP-to-concrete bonded interfaces. Construction and Building Materials, 152, 285-303.
    DOI Scopus72 WoS41
    2017 Smith, S. T. (2017). Editorial. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 170(5), 319-320.
    DOI
    2017 Smith, S. T., Rasheed, H. A., & Kim, S. J. (2017). Full-range load-deflection response of FRP-strengthened RC flexural members anchored with FRP anchors. Composite Structures, 167, 207-218.
    DOI Scopus34 WoS23
    2017 Wang, D., Wang, Z., Smith, S. T., & Yu, T. (2017). Seismic performance of CFRP-confined circular high-strength concrete columns with high axial compression ratio. Construction and Building Materials, 134, 91-103.
    DOI Scopus68 WoS40
    2016 Ozbakkaloglu, T., Chen, J. F., Smith, S. T., & Dai, J. G. (2016). Applications of fiber reinforced polymer composites. International Journal of Polymer Science, 2016, 5804145-1.
    DOI Scopus6 WoS2
    2016 Zhang, H., Smith, S. T., & Gravina, R. J. (2016). Analysis of FRP-to-concrete interfaces using a displacement driven partial interaction model. International Journal of Mechanical Sciences, 117, 210-217.
    DOI Scopus10 WoS9
    2016 Wang, D. Y., Wang, Z. Y., Smith, S. T., & Yu, T. (2016). Size effect on axial stress-strain behavior of CFRP-confined square concrete columns. Construction and Building Materials, 118, 116-126.
    DOI Scopus140 WoS102
    2016 Anderson, D. J., Smith, S. T., & Au, F. T. K. (2016). Mechanical properties of concrete utilising waste ceramic as coarse aggregate. Construction and Building Materials, 117, 20-28.
    DOI Scopus159 WoS95
    2016 Cai, Z., Wang, D., Smith, S. T., & Wang, Z. (2016). Experimental investigation on the seismic performance of GFRP-wrapped thin-walled steel tube confined RC columns. Engineering Structures, 110, 269-280.
    DOI Scopus50 WoS33
    2016 Li, D., Smith, S., & Ma, X. (2016). End condition effect on initial buckling performance of thin plates resting on tensionless elastic or rigid foundations. International Journal of Mechanical Sciences, 105, 83-89.
    DOI Scopus17 WoS14
    2015 Smith, S. T. (2015). Editorial. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 168(9), 617-618.
    DOI
    2015 Wu, Y. F., Li, G., Smith, S. T., & Xu, R. (2015). Special issue on applications of engineering composites: Materials, structures, and interfaces. Advances in Mechanical Engineering, 7(7), 1.
    DOI
    2015 Smith, S. T. (2015). Editorial. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 168(1), 1-2.
    DOI WoS1
    2015 Smith, S. T. (2015). Editorial. Proceedings of the Institution of Civil Engineers Structures and Buildings, 168(9), 617-618.
    DOI
    2014 Smith, S. T., & Chen, J. F. (2014). Special issue on the 10th anniversary of IIFC. Journal of Composites for Construction, 18(3), 1 page.
    DOI
    2014 Wan, J., Smith, S. T., Qiao, P., & Chen, F. (2014). Experimental investigation on FRP-to-timber bonded interfaces. Journal of Composites for Construction, 18(3), A4013006-1-A4013006-9.
    DOI Scopus56 WoS38
    2014 Zhao, X. L., Al-Mahaidi, R., Bai, Y., & Smith, S. T. (2014). FRP strengthening of structures subject to fatigue, impact and environmental loading. Advances in Structural Engineering, 17(12), i.
    DOI Scopus1
    2013 Shrestha, R., Smith, S. T., & Samali, B. (2013). Finite element modelling of FRP-strengthened RC beam-column connections with ANSYS. Computers and Concrete, 11(1), 1-20.
    DOI Scopus19 WoS15
    2013 Smith, S. T., Zhang, H., & Wang, Z. (2013). Influence of FRP anchors on the strength and ductility of FRP-strengthened RC slabs. Construction and Building Materials, 49, 998-1012.
    DOI Scopus95 WoS58
    2013 Zhang, H., & Smith, S. T. (2013). Fibre-reinforced polymer (FRP)-to-concrete joints anchored with FRP anchors: Tests and experimental trends. Canadian Journal of Civil Engineering, 40(11), 1103-1116.
    DOI Scopus37 WoS20
    2013 Yang, J. Q., Smith, S. T., & Feng, P. (2013). Effect of FRP-to-steel bonded joint configuration on interfacial stresses: Finite element investigation. Thin Walled Structures, 62, 215-228.
    DOI Scopus37 WoS27
    2013 Kalfat, R., Al-Mahaidi, R., & Smith, S. T. (2013). Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: State-of-the-art review. Journal of Composites for Construction, 17(1), 14-33.
    DOI Scopus338 WoS221
    2013 Smith, S. T. (2013). Editorial. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 166(1), 1.
    DOI WoS23
    2012 Wang, Z., Wang, D., Smith, S. T., & Lu, D. (2012). CFRP-confined square RC columns. I: experimental investigation. Journal of Composites for Construction, 16(2), 150-160.
    DOI Scopus210 WoS161
    2012 Wang, Z., Wang, D., Smith, S. T., & Lu, D. (2012). CFRP-confined square RC columns. II: cyclic axial compression stress-strain model. Journal of Composites for Construction, 16(2), 161-170.
    DOI Scopus110 WoS76
    2012 Zhang, H. W., & Smith, S. T. (2012). Influence of FRP anchor fan configuration and dowel angle on anchoring FRP plates. Composites Part B: Engineering, 43(8), 3516-3527.
    DOI Scopus114 WoS78
    2012 Wang, Z., Wang, D., Smith, S. T., & Lu, D. (2012). Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression. Engineering Structures, 40, 64-74.
    DOI Scopus188 WoS126
    2012 Xu, L. J., Lu, X. Z., Smith, S. T., & He, S. T. (2012). Scaled model test for collision between over-height truck and bridge superstructure. International Journal of Impact Engineering, 49, 31-42.
    DOI Scopus67 WoS42
    2012 Zhang, H. W., & Smith, S. T. (2012). FRP-to-concrete joint assemblages anchored with multiple FRP anchors. Composite Structures, 94(2), 403-414.
    DOI Scopus94 WoS72
    2012 Loo, K., Foster, S., & Smith, S. (2012). Fatigue behavior of carbon fiber-reinforced polymer-repaired corroded reinforced concrete beams. ACI Structural Journal, 109(6), 795-803.
    Scopus10 WoS9
    2012 Loo, K. Y. M., Foster, S. J., & Smith, S. T. (2012). FE modeling of CFRP-repaired RC beams subjected to fatigue loading. Journal of Composites for Construction, 16(5), 572-580.
    DOI Scopus18 WoS11
    2012 Zhang, H. W., Smith, S. T., & Kim, S. J. (2012). Optimisation of carbon and glass FRP anchor design. Construction and Building Materials, 32, 1-12.
    DOI Scopus120 WoS75
    2011 Wang, K., Young, B., & Smith, S. T. (2011). Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures. Engineering Structures, 33(7), 2154-2161.
    DOI Scopus224 WoS147
    2011 Schmidt, J. W., Smith, S. T., Tljsten, B., Bennitz, A., Goltermann, P., & Pedersen, H. (2011). Numerical simulation and experimental validation of an integrated sleeve-wedge anchorage for CFRP rods. Journal of Composites for Construction, 15(3), 284-292.
    DOI Scopus30 WoS20
    2011 Shrestha, R., Smith, S. T., & Samali, B. (2011). The effectiveness of FRP strips in repairing moderately and severely damaged RC beam-column connections. Magazine of Concrete Research, 63(9), 629-644.
    DOI Scopus4 WoS3
    2011 Seliem, H. M., Seracino, R., Sumner, E. A., & Smith, S. T. (2011). Case study on the restoration of flexural capacity of continuous one-way RC slabs with cutouts. Journal of Composites for Construction, 15(6), 992-998.
    DOI Scopus20 WoS15
    2011 Smith, S. T., Hu, S., Kim, S. J., & Seracino, R. (2011). FRP-strengthened RC slabs anchored with FRP anchors. Engineering Structures, 33(4), 1075-1087.
    DOI Scopus213 WoS139
    2010 Smith, S. T., & Kim, S. J. (2010). Deflection calculation of FRP-strengthened reinforced concrete flexural members. Australian Journal of Structural Engineering, 11(2), 75-86.
    DOI Scopus11 WoS8
    2010 Su, R. K. L., Siu, W. H., & Smith, S. T. (2010). Effects of bolt-plate arrangements on steel plate strengthened reinforced concrete beams. Engineering Structures, 32(6), 1769-1778.
    DOI Scopus66 WoS40
    2010 Kim, S. J., & Smith, S. T. (2010). Pullout strength models for FRP anchors in uncracked concrete. Journal of Composites for Construction, 14(4), 406-414.
    DOI Scopus114 WoS73
    2010 Khomwan, N., Foster, S. J., & Smith, S. T. (2010). FE modeling of FRP-repaired planar concrete elements subjected to monotonic and cyclic loading. Journal of Composites for Construction, 14(6), 720-729.
    DOI Scopus11 WoS9
    2010 Smith, S. T., Kim, S. J., & Zhang, H. (2010). Behavior and effectiveness of FRP wrap in the confinement of large concrete cylinders. Journal of Composites for Construction, 14(5), 573-582.
    DOI Scopus149 WoS123
    2009 Shrestha, R., Smith, S. T., & Samali, B. (2009). Strengthening RC beam-column connections with FRP strips. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 162(5), 323-334.
    DOI Scopus37 WoS26
    2009 Smith, S. T., & Kim, S. J. (2009). Strengthening of one-way spanning RC slabs with cutouts using FRP composites. Construction and Building Materials, 23(4), 1578-1590.
    DOI Scopus47 WoS32
    2009 Chen, J. F., Teng, J. G., & Smith, S. T. (2009). Advances in Structural Engineering: Guest editorial. Advances in Structural Engineering, 12(6).
    2009 Chen, J. F., Teng, J. G., & Smith, S. T. (2009). Guest Editorial. Advances in Structural Engineering, 12(6), i.
    DOI
    2008 Gravina, R. J., & Smith, S. T. (2008). Flexural behaviour of indeterminate concrete beams reinforced with FRP bars. Engineering Structures, 30(9), 2370-2380.
    DOI Scopus107 WoS73
    2008 Yuan, X. F., Xia, S. H., Lam, L., & Smith, S. T. (2008). Analysis and behaviour of FRP-confined short concrete columns subjected to eccentric loading. Journal of Zhejiang University Science A, 9(1), 38-49.
    DOI Scopus18 WoS17
    2007 Smith, S. T., & Gravina, R. J. (2007). Modeling debonding failure in FRP flexurally strengthened RC members using a local deformation model. Journal of Composites for Construction, 11(2), 184-191.
    DOI Scopus48 WoS36
    2003 Teng, J. G., Chen, J. F., Smith, S. T., Lam, L., & Jessop, T. (2003). Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 156(3), 334-335.
    DOI WoS15
    2003 Smith, S. T., & Teng, J. G. (2003). Shear-bending interaction in debonding failures of FRP-plated RC beams. Advances in Structural Engineering, 6(3), 183-199.
    DOI Scopus160
    2003 Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2003). Behaviour and strength of FRP-strengthened RC structures: A state-of-the-art review. Proceedings of the Institution of Civil Engineers Structures and Buildings, 156(1), 51-62.
    DOI Scopus356 WoS209
    2003 Teng, J. G., Smith, S. T., Yao, J., & Chen, J. F. (2003). Intermediate crack-induced debonding in RC beams and slabs. Construction and Building Materials, 17(6-7), 447-462.
    DOI Scopus631 WoS473
    2003 Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2003). Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review. Structures <html_ent glyph="@amp;" ascii="&"/> Buildings, 156(1), 51-62.
    DOI
    2002 Smith, S. T., & Teng, J. G. (2002). FRP-strengthened RC beams. II: Assessment of debonding strength models. Engineering Structures, 24(4), 397-417.
    DOI Scopus294 WoS227
    2002 Teng, J. G., Zhang, J. W., & Smith, S. T. (2002). Interfacial stresses in reinforced concrete beams bonded with a soffit plate: A finite element study. Construction and Building Materials, 16(1), 1-14.
    DOI Scopus172 WoS145
    2002 Smith, S. T., & Teng, J. G. (2002). FRP-strengthened RC beams. I: Review of debonding strength models. Engineering Structures, 24(4), 385-395.
    DOI Scopus552 WoS402
    2001 Smith, S. T., & Teng, J. G. (2001). Interfacial stresses in plated beams. Engineering Structures, 23(7), 857-871.
    DOI Scopus522 WoS430
    2001 Smith, S., Bradford, M., & Oehlers, D. (2001). Buckling tests on steel plates restrained at discrete points in the retrofit of reinforced concrete beams. Proceedings of the Institution of Civil Engineers-structures and Buildings, 146(2), 115-127.
    DOI Scopus9 WoS7
    2001 Smith, S. T., Bradford, M. A., & Oehlers, D. J. (2001). Buckling tests on steel plates restrained at discrete points in the retrofit of reinforced concrete beams. Structures <html_ent glyph="@amp;" ascii="&"/> Buildings, 146(2), 115-127.
    DOI
    2000 Smith, S., Bradford, M., & Oehlers, D. (2000). Unilateral buckling of elastically restrained rectangular mild steel plates. Computational Mechanics, 26(4), 317-324.
    DOI Scopus24 WoS15
    2000 Bradford, M., Smith, S., & Oehlers, D. (2000). Semi-compact steel plates with unilateral restraint subjected to bending, compression and shear. Journal of Constructional Steel Research, 56(1), 47-67.
    DOI Scopus34 WoS31
    1999 Smith, S., Bradford, M., & Oehlers, D. (1999). Local Buckling of Side-plated Reinforced Oncrete Beams. Part 2 :Experimental Study. Journal of Structural Engineering, 125(6), 635-642.
    DOI Scopus52 WoS46
    1999 Smith, S., Bradford, M., & Oehlers, D. (1999). Local Buckling of Side-Plated Reinforced Concrete Beams. Part 1 : Theoretical Study. Journal of Structural Engineering, 125(6), 622-634.
    DOI Scopus57 WoS47
    1999 Smith, S., Bradford, M., & Oehlers, D. (1999). Elastic buckling of unilaterally constrained rectangular plates in pure shear. Journal of Engineering Structures, 21(5), 443-453.
    DOI Scopus78 WoS63
    1999 Smith, S., Bradford, M., & Oehlers, D. (1999). Numerical Convergence of Simple and Orthogonal polynomials for the Unilateral Plate Buckling Problem using the Rayleigh-Ritz Method. International Journal for Numerical Methods in Engineering, 44(11), 1685-1707.
    DOI Scopus67 WoS50

  • Books
    Year Citation
    2016 Bahadori, A., & Smith, S. T. (2016). Dictionary of Environmental Engineering and Wastewater Treatment. Springer.
    2008 Oehlers, D., Seracino, R., & Smith, S. (2008). Design handbook for RC structures retrofitted with FRP and metal plates: beams and slabs. Australia: Standards Publishing Department (of Standards Australia).
    2002 Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2002). FRP Strengthened RC Structures. Wiley-Blackwell.

  • Book Chapters
    Year Citation
    2008 Teng, J. G., Smith, S. T., & Chen, J. F. (2008). Design guidelines for fibre-reinforced polymer (FRP)-strengthened reinforced concrete (RC) structures. In Strengthening and Rehabilitation of Civil Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites (pp. 195-214). Elsevier.
    DOI Scopus9
    2008 Teng, J. G., Smith, S. T., & Chen, J. F. (2008). Flexural strengthening of reinforced concrete (RC) beams with fibre-reinforced polymer (FRP) composites. In Strengthening and Rehabilitation of Civil Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites (pp. 112-140). Elsevier.
    DOI Scopus7

  • Conference Papers
    Year Citation
    2025 Tafsirojjaman, T., Smith, S. T., Rakib, M. A., Sheikh, A. H., Evangelista, J., & Rassias, H. (2025). Development of a Stuffed Whipple Shield for Radiation Protection of Lunar Structures. In Lecture Notes in Civil Engineering Vol. 557 LNCE (pp. 176-183). Riyadh: Springer Nature Singapore.
    DOI Scopus1
    2024 Stankiewicz, M. E. B., Srivastava, A., & Smith, S. T. (2024). Designing for Repair and Repairability in Lunar Habitats: Preliminary Investigations in Regolith Block Based Construction. In Proceedings of the International Astronautical Congress, IAC (pp. 6-16). Milan: International Astronautical Federation (IAF).
    DOI
    2024 Lee, S., Bennett, T., & Smith, S. T. (2024). Stability Assessment of Masonry Domes Using Thrust Network Analysis in Earth and Lunar Environments. In Lecture Notes in Civil Engineering Vol. 513 LNCE (pp. 123-133). Auckland, NZ: Springer Nature Singapore.
    DOI
    2024 Hossain, M. A., Smith, S. T., & Tafsirojjaman, T. (2024). Mechanical Properties of Regolith-Resin-Based Composite (RRC) for Lunar Construction Utilizing In Situ Resources. In Earth and Space 2024: Engineering for Extreme Environments - Proceedings of the 19th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (pp. 995-1005). Miami, Florida: Aerospace Division of the American Society of Civil Engineers (ASCE).
    DOI Scopus1
    2024 Rakib, M. A., Smith, S. T., & Tafsirojjaman, T. (2024). Behavior of Stuffed Whipple Shields Subjected to Micrometeoroid and Orbital Debris Impact. In Earth and Space 2024: Engineering for Extreme Environments - Proceedings of the 19th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (pp. 509-516). Miami, Florida: American Society of Civil Engineers (ASCE).
    DOI Scopus1
    2024 Stankiewicz, M. E. B., Srivastava, A., & Smith, S. T. (2024). Towards Resilient Lunar Architecture: A Systematic Literature Review of Earth-Based Repair Frameworks for Use in Lunar Construction. In Earth and Space 2024: Engineering for Extreme Environments - Proceedings of the 19th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (pp. 833-843). Miami, Florida: American Society of Civil Engineers (ASCE).
    DOI Scopus1
    2023 Doan, L. T. A., Karakus, M., Nguyen, G. D., Smith, S., Chester, C., & Hawker, R. (2023). Estimating the Hydraulic Conductivity of jointed rock mass using Genetic Programming. In IOP Conference Series: Earth and Environmental Science Vol. 1124 (pp. 012001). Online: IOP Publishing.
    DOI Scopus3
    2021 Gravina, R. J., Li, J., Smith, S. T., & Visintin, P. (2021). Review of FRP Bar to Concrete Bond in Hygrothermal Conditions. In Lecture Notes in Civil Engineering Vol. 198 LNCE (pp. 942-951). Online: Springer International Publishing.
    DOI
    2021 Wu, Y. F., Zhou, Y. W., Hu, B., Huang, X. X., & Smith, S. T. (2021). Fused bridge structures for higher impact resistance. In Lecture Notes in Civil Engineering Vol. 101 (pp. 611-623). Singapore: Springer Singapore.
    DOI
    2020 Farries, K. W., Visintin, P., & Smith, S. T. (2020). Construction of lunar masonry habitats using laser-processed bricks. In Proceedings of the 71st International Astronautical Congress, IAC 2020 Vol. 2020-October. online: IAF.
    Scopus1
    2020 Smith, S. T., & Shrestha, R. (2020). A review of FRPstrengthened RC beamcolumn connections. In Composites in Civil Engineering Cice 2006 (pp. 661-664).
    Scopus15
    2020 Crews, K. I., & Smith, S. T. (2020). Tests on FRPstrengthened timber joints. In Composites in Civil Engineering Cice 2006 (pp. 677-680).
    Scopus7
    2020 Kaul, R., Sri Ravindrarajah, R., & Smith, S. T. (2020). Deformational behaviour of FRP confined concrete under sustained compression. In Composites in Civil Engineering Cice 2006 (pp. 207-210).
    Scopus4
    2020 Otoom, O. F. A., Smith, S. T., & Foster, S. J. (2020). Finite element modelling of FRP shearstrengthened RC beams. In Composites in Civil Engineering Cice 2006 (pp. 437-440).
    Scopus4
    2020 Yang, J., Smith, S., & Feng, P. (2020). FRP-to-metal bonds: Effect of test specimen configuration on interfacial stresses. In APFIS 2012 - 3rd Asia-Pacific Conference on FRP in Structures.
    2020 Tang, Z. S., Lim, Y. Y., & Smith, S. T. (2020). A study on monitoring the curing process of structural adhesives using wave propagation. In Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25 ), as published in Lecture Notes in Civil Engineering Vol. 37 (pp. 879-885). Singapore: Springer.
    DOI
    2020 Sirach, N., Smith, S. T., Yu, T., & Mostafa, A. (2020). Concrete Columns Confined with Large Rupture Strain Composites: An Emerging Field. In ACMSM25 Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials Vol. 37 (pp. 277-285). Singapore: Springer.
    DOI Scopus5 WoS4
    2020 Wang, Z., Wang, D., & Smith, S. (2020). Size effect of square concrete columns confined with CFRP wraps. In APFIS 2012 - 3rd Asia-Pacific Conference on FRP in Structures.
    2019 Kanitkar, R., Del Rey Castillo, E., Smith, S. T., & Rasheed, H. (2019). Quality control and assurance for FRP anchors - Current practice and path forward. In Proceedings of the 7th Asia-Pacific Conference on FRP in Structures (APFIS 2019) (pp. 1-5). Gold Coast, Australia: IIFC.
    Scopus3
    2019 Mostafa, A., Shankar, K., & Smith, S. (2019). Numerical modeling of progressive damage of composite laminates. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures.
    2019 Smith, S., Yu, T., Fernando, D., & Wang, Z. (2019). Preface. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures (pp. III-IV).
    2019 Tang, Z., Lim, Y., Smith, S., & Sirach, N. (2019). Monitoring the curing process of structural adhesives using the electromechanical impedance technique: A numerical investigation. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures.
    Scopus1
    2019 Tang, Z. S., Lim, Y. Y., Smith, S. T., & Sirach, N. (2019). Monitoring the strength gain of structural adhesives using the electromechanical impedance technique: An experimental investigation. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Surfers Paradise, Australia.
    2019 Sirach, N., Smith, S., Yu, T., Mostafa, A., & Tang, Z. (2019). Experimental study on the confinement of high-strength concrete columns with large rupture strain FRP composites. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Gold Coast, Australia.
    2019 Sirach, N., Smith, S. T., Yu, T., Mostafa, A., & Tang, Z. S. (2019). Confinement of concrete columns with large rupture strain FRP composites. In Proceedings of the 7th Asia-Pacific Conference on FRP in Structures (APFIS 2019). Gold Coast, Australia: IIFC.
    2019 Del Rey Castillo, E., Kanitkar, R., & Smith, S. T. (2019). Case studies of using FRP anchors in New Zealand. In Proceedings of the 7th Asia-Pacific Conference on FRP in Structures (APFIS 2019) (pp. 1-5). Gold Coast, Australia: IIFC.
    Scopus3
    2019 Mostafa, A., Shankar, K., & Smith, S. T. (2019). Numerical determination of ballistic limit velocity of stainless steel woven wire mesh. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Gold Coast, Australia.
    2019 Smith, S., Yu, T., Fernando, D., & Wang, Z. (2019). Forward. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures (pp. 2).
    2018 Gravina, R., Li, J., Aydin, H., Setunge, S., Visintin, P., Smith, S., & Al-Mahaidi, R. (2018). Bond Performance of FRP-Strengthened Reinforced Concrete In Aggressive Environmental Conditions. In N. Powers, D. Frangopol, R. AlMahaidi, & C. Caprani (Eds.), MAINTENANCE, SAFETY, RISK, MANAGEMENT AND LIFE-CYCLE PERFORMANCE OF BRIDGES (pp. 294-301). UK: CRC Press-Taylor & Francis Group.
    2017 Kalfat, R., Gadd, J., Al-Mahaidi, R., & Smith, S. (2017). Evaluation and classification of anchorage systems used to enhance the flexural performance of FRP strengthened concrete members. In American Concrete Institute, ACI Special Publication Vol. 2017-October (pp. 559-568). Online: American Concrete Institute.
    Scopus1
    2017 Del Rey Castillo, E., Ingham, J. M., Smith, S. T., Kanitkar, R., & Griffith, M. C. (2017). A design approach for FRP anchors in FRP-strengthened RC structures. In Proceedings of the the 13th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structure (FRPRCS-13), as published in American Concrete Institute, ACI Special Publication Vol. 327 (pp. 343-359). Online: American Concrete Institute.
    Scopus5
    2017 Lim, Y., Smith, S., & Izadgoshasb, I. (2017). Smart-based monitoring of epoxy using piezoelectric transducers. In SHMII 2017 - 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Proceedings (pp. 1151-1159). online: International Society for Structural Health Monitoring of Intelligent Infrastrucure.
    Scopus2
    2017 Lim, Y., Izadgoshasb, I., & Smith, S. (2017). Monitoring of corrosion process in structural adhesive using smart materials. In SHMII 2017 - 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Proceedings (pp. 1186-1194). online: International Society for Structural Health Monitoring of Intelligent Infrastrucure.
    Scopus1
    2017 Smith, S., Rasheed, H., & Kim, S. (2017). Moment-curvature based modelling of FRPstrengthened RC members anchored with FRP anchors. In Abstracts of the 6th Asia-Pacific Conference on FRP in Structures (APFIS 2017) (pp. 1-5). online: IIFC.
    Scopus2
    2016 Kanitkar, R., Smith, S., & Lewis, C. (2016). An experimental investigation on the splay portion of embedded FRP tension anchors. In Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2016 (pp. 413-418). Online: Department of Civil and Environmental Engineering and Research Institute for Sustainable Urban Development, The Hong Kong Polytechnic University.
    Scopus13
    2014 Wan, J., Smith, S., & Zhang, H. (2014). Experimental trends of FRP-to-timber joint tests. In Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014 (pp. 146). Canada: International Institute for FRP in Construction (IIFC).
    2014 Zhang, H., Smith, S., & Wang, Z. (2014). Strategic positioning of FRP anchors in frpstrengthened slabs. In Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014 (pp. 145). Canada: International Institute for FRP in Construction (IIFC).
    2014 Smith, S., & Zhang, H. (2014). Numerical modelling of FRP-concrete bonded interfaces anchored with FRP anchors. In American Concrete Institute, ACI Special Publication Vol. 2014-April (pp. 251-264). Online: American Concrete Institute.
    2013 Wang, D. Y., Wang, Z. Y., Li, H., & Smith, S. T. (2013). Shaking table test of large scale nonductile RC frames retrofitted with FRP composites. In Proceedings of the 4th Asia-Pacific Conference on FRP in Structures, APFIS 2013.
    Scopus4
    2013 Zhang, H. W., & Smith, S. T. (2013). Experimental trends of FRP-to-concrete joints anchored with FRP anchors. In From Materials to Structures: Advancement Through Innovation - Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, ACMSM 2012 (pp. 161-166).
    2012 Wang, Z., Wang, D., Pan, X., & Smith, S. T. (2012). Analytical evaluation of seismic performance of non ductile RC frames retrofitted using CFRP composites. In Proceedings of the 6th International Conference on FRP Composites in Civil Engineering, CICE 2012.
    2012 Wang, Z., Wang, D., Pan, X., & Smith, S. T. (2012). Analytical evaluation of seismic performance of non-ductile RC frames retrofitted using CFRP composites. In Proceedings of the 6th International Conference on FRP Composites in Civil Engineering, CICE 2012.
    2012 Wang, K., Young, B., & Smith, S. T. (2012). Ultimate strength equation for pultruded CFRP plates in fire. In Proceedings of the 6th International Conference on FRP Composites in Civil Engineering, CICE 2012.
    Scopus1
    2012 Li, H., Zhou, X., Chen, C., Huang, Y., Bao, L., Bao, T., . . . Geem, Z. W. (2012). Preface. In Applied Mechanics and Materials Vol. 174-177.
    2012 Yang, J. Q., Smith, S. T., & Feng, P. (2012). FRP-to-metal bonds: Effect of test specimen configuration on interfacial stresses. In Apfis 2012 3rd Asia Pacific Conference on Frp in Structures.
    2012 Wang, Z., Wang, D., & Smith, S. T. (2012). Size effect of square concrete columns confined with CFRP wraps. In Apfis 2012 3rd Asia Pacific Conference on Frp in Structures.
    Scopus13
    2011 Smith, S. T., Hu, S., Kim, S. J., & Seracino, R. (2011). Strength and deflection enhancement of RC slabs with anchored FRP strengthening. In American Concrete Institute ACI Special Publication Vol. 2 (pp. 1207-1220).
    Scopus3
    2011 Zhang, H. W., & Smith, S. T. (2011). FRP-to-concrete joint assemblies anchored with multiple FRP anchors: Experimental investigation. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering, CICE 2010 (pp. 553-556). Beijing, PEOPLES R CHINA: SPRINGER-VERLAG BERLIN.
    DOI Scopus4 WoS2
    2011 Wan, J., Smith, S. T., & Qiao, P. Z. (2011). FRP-To-softwood joints: Experimental investigation. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in Frp Composites in Civil Engineering Proceedings of the 5th International Conference on Frp Composites in Civil Engineering Cice 2010 (pp. 951-954). Beijing, PEOPLES R CHINA: SPRINGER-VERLAG BERLIN.
    DOI Scopus14 WoS8
    2011 Kim, S. J., Smith, S. T., & Young, B. (2011). Effect of surface preparation on the strength of FRP-To-mild steel and FRP-To-stainless steel joints. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering, CICE 2010 (pp. 869-872). Beijing, PEOPLES R CHINA: SPRINGER-VERLAG BERLIN.
    DOI Scopus16 WoS8
    2011 Zhang, H., & Smith, S. T. (2011). Influence of anchor embedment angle on the strength and behaviour of FRP-to-concrete joints anchored with FRP anchors. In Advanced Composites in Construction 2011, ACIC 2011 - Proceedings of the 5th International Conference (pp. 204-213).
    2011 Yang, J. Q., & Smith, S. T. (2011). An experimental investigation on strengthening single-bolted timber joints with externally bonded CFRP composites. In Advanced Composites in Construction 2011, ACIC 2011 - Proceedings of the 5th International Conference (pp. 59-70).
    2011 Yip, H. L., Au, F. T. K., & Smith, S. T. (2011). Serviceability performance of prestressed concrete buildings taking into account long-term behaviour and construction sequence. In L. H. Fai (Ed.), Procedia Engineering Vol. 14 (pp. 1384-1391). Hong Kong, PEOPLES R CHINA: ELSEVIER SCIENCE BV.
    DOI Scopus8 WoS4
    2011 Smith, S. T., & Kim, S. J. (2011). Towards calculating the load-deflection response of anchored FRP-strengthened RC slabs. In S. Fragomeni, S. Venkatesan, N. T. K. Lam, & S. Setunge (Eds.), Incorporating Sustainable Practice in Mechanics of Structures and Materials - Proceedings of the 21st Australian Conference on the Mechanics of Structures and Materials (pp. 463-468). Victoria Univ City Campus, Melbourne, AUSTRALIA: CRC PRESS-TAYLOR & FRANCIS GROUP.
    2011 Yip, H. L., Au, F. T. K., & Smith, S. T. (2011). Accounting for steel relaxation in prestressed concrete by finite element packages. In S. Fragomeni, S. Venkatesan, N. T. K. Lam, & S. Setunge (Eds.), Incorporating Sustainable Practice in Mechanics of Structures and Materials - Proceedings of the 21st Australian Conference on the Mechanics of Structures and Materials (pp. 155-160). Victoria Univ City Campus, Melbourne, AUSTRALIA: CRC PRESS-TAYLOR & FRANCIS GROUP.
    Scopus1 WoS1
    2011 Smith, S. T. (2011). Strengthening of concrete, metallic and timber construction materials with FRP composites. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering, CICE 2010 (pp. 13-19). Beijing, PEOPLES R CHINA: SPRINGER-VERLAG BERLIN.
    DOI Scopus31 WoS16
    2011 Wang, K., Young, B., & Smith, S. T. (2011). An experimental study on the mechanical properties of pultruded CFRP plates at elevated temperatures. In Structures Congress 2011 - Proceedings of the 2011 Structures Congress (pp. 3110-3119). American Society of Civil Engineers.
    DOI Scopus2
    2010 Smith, S. T. (2010). THE TEACHING OF SUSTAINABLE DEVELOPMENT TO UNDERGRADUATE ENGINEERING STUDENTS AT THE UNIVERSITY OF HONG KONG. In J. G. Teng (Ed.), PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON SUSTAINABLE URBANIZATION (ICSU 2010) (pp. 1007-1012). Hong Kong, PEOPLES R CHINA: HONG KONG POLYTECHNIC UNIV, FAC CONSTRUCTION & ENVIRONMENT.
    2010 Smith, S. T., & Kim, S. J. (2010). Testing of large concrete cylinders confined with FRP. In 3rd International fib Congress and Exhibition, Incorporating the PCI Annual Convention and Bridge Conference: Think Globally, Build Locally, Proceedings.
    2009 Smith, S. T., & Kim, S. J. (2009). Calculation of deflection of FRP-strengthened RC slabs using a tri-linear moment-curvature relationship. In Advanced Composites in Construction 2009, ACIC 2009 - Proceedings of the 4th International Conference (pp. 239-249).
    Scopus1
    2009 Kim, S. J., & Smith, S. T. (2009). Behaviour of handmade FRP anchors under tensile load in uncracked concrete. In Advances in Structural Engineering Vol. 12 (pp. 845-865). MULTI-SCIENCE PUBL CO LTD.
    DOI Scopus63 WoS41
    2009 Mohamed, I., Seracino, R., & Smith, S. T. (2009). Analysis of FRP-to-concrete joint assemblies with FRP spike anchors using the applied element method. In APFIS 2009 - Asia-Pacific Conference on FRP in Structures (pp. 223-228).
    Scopus1
    2009 Kim, S. J., & Smith, S. T. (2009). Strengthening of RC slabs with large penetrations using anchored FRP composites. In APFIS 2009 - Asia-Pacific Conference on FRP in Structures (pp. 111-116).
    Scopus8
    2009 Smith, S. T. (2009). FRP anchors: Recent advances in research and understanding. In APFIS 2009 - Asia-Pacific Conference on FRP in Structures (pp. 35-44).
    Scopus22
    2008 Smith, S. T., & Kim, S. J. (2008). Behaviour of handmade FRP spike anchors. In Futures in Mechanics of Structures and Materials - Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, ACMSM20 (pp. 39-45).
    2008 Shrestha, R., Samali, B., & Smith, S. T. (2008). Effectiveness of repairing damaged RC beam-column connections with FRP strips. In Futures in Mechanics of Structures and Materials - Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, ACMSM20 (pp. 395-403).
    2008 Seliem, H. M., Sumner, E. A., Seracino, R., & Smith, S. T. (2008). Field testing of RC slabs with openings strengthened with CFRP. In Proceedings of the 4th International Conference on FRP Composites in Civil Engineering, CICE 2008.
    Scopus12
    2008 Shrestha, R., Smith, S. T., & Samali, B. (2008). Effectiveness of strengthening RC beam-column connections in shear with vertical FRP strips. In Proceedings of the 4th International Conference on FRP Composites in Civil Engineering, CICE 2008.
    2007 Lau, K. T., Smith, S. T., Tam, H. Y., & Ho, S. L. (2007). Smart composites for civil infrastructure applications. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 2 (pp. 579-586).
    2007 Kim, S. J., & Smith, S. T. (2007). Pull-out tests on FRP anchors. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 2 (pp. 775-782).
    Scopus5
    2007 Loo, M. K. Y., Foster, S. J., & Smith, S. T. (2007). Bond stress versus slip model for CFRP plates bonded to concrete. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 2 (pp. 709-716).
    Scopus3
    2007 Shrestha, R., & Smith, S. T. (2007). An experimental investigation on the strengthening of RC beamcolumn connections with FRP composites. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 1 (pp. 213-220).
    Scopus5
    2007 Smith, S. T. (2007). Preface. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 1 (pp. III-IV).
    2007 Loo, M. K. Y., Foster, S. J., & Smith, S. T. (2007). Fatigue behaviour of CFRP-repaired corroded RC beams. In Progress in Mechanics of Structures and Materials - Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials, ACMSM19 (pp. 687-692).
    2006 Gilbert, R. I., & Smith, S. T. (2006). Strain localization and its impact on the ductility of reinforced concrete slabs containing welded wire reinforcement. In Advances in Structural Engineering Vol. 9 (pp. 117-127). Perth, AUSTRALIA: MULTI SCIENCE PUBL CO LTD.
    DOI Scopus28 WoS22
    2005 Smith, S. T., & Gravina, R. J. (2005). Critical debonding length in FRP flexurally strengthened RC members. In J. F. Chen, & J. G. Teng (Eds.), Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005 (pp. 277-282). Hong Kong, PEOPLES R CHINA: IIFC SECRETARIAT.
    WoS1
    2005 Li, J., Samali, B., & Smith, S. T. (2005). Stiffness estimation and damage detection of fibre reinforced polymer strengthened reinforced concrete beams using a vibration-based method. In 4th Australasian Congress on Applied Mechanics, ACAM 2005 (pp. 663-669).
    Scopus1
    2003 Zou, P. X. W., & Smith, S. T. (2003). Time-dependent flexural crack width prediction of concrete beams prestressed with CFRP tendons. In K. H. Tan (Ed.), FIBRE-REINFORCEMENT POLYMER: REINFORCEMENT FOR CONCRETE STRUCTURES, VOLS 1 AND 2, PROCEEDINGS (pp. 1023-1034). SINGAPORE, SINGAPORE: WORLD SCIENTIFIC PUBL CO PTE LTD.
    WoS1
    2003 Smith, S. T., Teng, J. G., & Lu, M. (2003). Neural network prediction of plate end debonding in FRP-plated RC beams. In K. H. Tan (Ed.), FIBRE-REINFORCEMENT POLYMER: REINFORCEMENT FOR CONCRETE STRUCTURES, VOLS 1 AND 2, PROCEEDINGS (pp. 193-204). SINGAPORE, SINGAPORE: WORLD SCIENTIFIC PUBL CO PTE LTD.
    2001 Teng, J. G., Chen, J. F., & Smith, S. T. (2001). Debonding failures in FRP-strengthened RC beams: Failure modes, existing research and future challenges. In Composites in Construction: A reality (pp. 139-148). American Society of Civil Engineers.
    DOI Scopus8
    2001 Yuan, X. F., Lam, L., Teng, J. G., & Smith, S. T. (2001). FRP-confined RC columns under combined bending and compression: A comparative study of concrete stress-strain models. In J. G. Teng (Ed.), FRP COMPOSITES IN CIVIL ENGINEERING, VOLS I AND II, PROCEEDINGS (pp. 749-758). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV.
    WoS7
    2001 Smith, S. T., & Teng, J. G. (2001). Debonding failures in FRP-plated RC beams with or without U strip end anchorage. In J. G. Teng (Ed.), FRP COMPOSITES IN CIVIL ENGINEERING, VOLS I AND II, PROCEEDINGS (pp. 607-615). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV.
    WoS6
    2001 Teng, J. G., Smith, S. T., Yao, J., & Chen, J. F. (2001). Strength model for intermediate flexural crack induced debonding in RC beams and slabs. In J. G. Teng (Ed.), FRP COMPOSITES IN CIVIL ENGINEERING, VOLS I AND II, PROCEEDINGS (pp. 579-587). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV.
    WoS4
    1999 Smith, S. T., Bradford, M. A., & Oehlers, D. J. (1999). Post-buckling of unilaterally constrained mild steel plates. In S. L. Chan, & J. G. Teng (Eds.), ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2 (pp. 571-578). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV.
    1999 Teng, J. G., Smith, S. T., & Ngok, L. Y. (1999). Local buckling of thin-walled polygonal columns subjected to axial compression or bending. In S. L. Chan, & J. G. Teng (Eds.), ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2 (pp. 109-115). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV.
    WoS8
    1999 Smith, S. T., Bradford, M. A., & Oehlers, D. J. (1999). Buckling of unilaterally constrained mild steel plates at elevated temperatures. In M. A. Bradford, R. Q. Bridge, & S. J. Foster (Eds.), MECHANICS OF STRUCTURES AND MATERIALS (pp. 443-+). SYDNEY, AUSTRALIA: A A BALKEMA PUBLISHERS.

  • Conference Items
    Year Citation
    2019 Smith, S., Yu, T., Fernando, D., & Wang, Z. (2019). Preface. Poster session presented at the meeting of APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures.
    2019 Smith, S. T., Yu, T., Fernando, D., & Wang, Z. (2019). Preface. Poster session presented at the meeting of Apfis 2019 Proceedings 7th Asia Pacific Conference on Frp in Structures.

External Competitive Grants: 2013-present (based in Australia)

Smith, S.T., Sheikh, A., Gravina, R. and Griffith, M.C., "Multifunctional Structural Panels for Next-Generation Infrastructure", ARC Discovery (DP220103665), 2022-2024, AUD 308,000

Tao, Z. (Western Sydney University) et al. (Smith, S.T. CI), "National Facility for Physical Fire Simulation", ARC Linkage, Infrastructure and Facilities (LIEF) (LE220100030), 2022, AUD 1,213,351

Setunge, S. (Hub Director, RMIT) et al. (Smith, S.T. CI), "ARC Research Hub for Transformation of Reclaimed Waste Resources to Engineered Materials and Solutions for a Circular Economy", ARC Industrial Transformation Research Hub (ITRH) (IH200100010), 2021-2025, AUD 5,000,000

Wu, Y.F. and Smith, S.T., "Structural Fuses for Safer and More Economical Bridge Construction", ARC Discovery (DP200100631), 2020-2022, AUD 390,000

Yu, T., Teh, L., Smith, S.T. and Teng, J.G., "Hybrid Multiple-Tube Concrete Columns Incorporating Composite Materials", ARC Discovery (DP170102992), 2017-2019, AUD 280,000

Gravina, R., Setunge, S., Al-Mahaidi, R., Smith, S.T., Koay, Y.C., Taylor, S. and Pritchard, R., "Durability of Debonding Resistance of Composite Materials based Strengthening Techniques for Deteriorated Structures", ARC Linkage (LP130100482), 2014-2018, AUD 210,000

 

External Competitive Grants 2007-2013 (when I was based in Hong Kong)

Smith, S.T. and Oehlers, D.J., “Rational Modelling and Design of Externally Bonded Strengthening Systems for Civil Infrastructure Incorporating Anchorage Devices”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 715712E), 2013-2015, HKD 700,000

Wu, Y.F., Bank, L., Smith, S.T. and Teng, J.G., “Characterization of a mechanically enhanced FRP bonding system”, General Research Fund (GRF), HK Research Grants Council (RGC) (123711), 2012-2014, HKD 807,842

Teng, J.G., Smith, S.T., Wu, Y.F., Dai, J.G. and Yu, T   Development of a Design Guideline for the Strengthening of Concrete Structures using FRP Composites, ITF Tier 3, Tier 3 of the Innovation and Technology Fund (ITF) of the Innovation and Technology Commission (ITC), Hong Kong (Includes HKD180K industry sponsorship) (ITS/084/08), 2009-2010, HKD 1,130,130

Smith, S.T. and R. Seracino, “Strengthening of Reinforced Concrete Slabs with Large Penetrations using Fibre-Reinforced Polymer (FRP) Composites”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 716308E), 2009-2011, HKD 572,596

Su, R.K.L and Smith, S.T., “A Generic Displacement-Based Approach for the Design of Plated Concrete Beams with Bolt Connections”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 716608E), 2009-2010, HKD 585,109

Smith, S.T., “Prevention of Debonding Failures in Externally Bonded Fibre Reinforced Polymer (FRP) Composite Strengthening Systems using FRP Anchors”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 715907E), 2008-2011, HKD 562,992

 

External Competitive Grants: 2004-2006 (when I was based in Australia)

Smith, S.T., “Retrofit of Reinforced Concrete Beam-Column Connections with Fibre Reinforced Polymer (FRP) Composites”, ARC Discovery (DP0559567), 2005-2007, AUD 283,000

Foster, S.J. and Smith, S.T., “Debonding Failure in CFRP Strengthened Concrete Structures”, ARC Discovery (DP0453096), 2004-2006, AUD 150,000

Aravinthan, T. et al (Smith, S.T. UTS node leader), “Research Network for Rehabilitation of Structures Using Advanced Materials and Frontier Technologies”, ARC Special (SR0354805), 2004, AUD 10,000

 

Course Level

I have had a range of experiences in course design, implementation and accreditation.

  • Bachelor of Engineering (Honours) in Civil Engineering: commenced 2013 (led the successful Engineers Australia provisional accreditation for the Environmental Engineering Major in 2016 and the full accreditation for civil engineering in 2018) (Southern Cross University, Australia)
  • Bachelor of Engineering (Honours) in Mechanical Engineering: commenced 2016 (led the course design, and the successful Engineers Australia provisional accreditation in 2016) (Southern Cross University, Australia)
  • Bachelor of Engineering (Honours) in Coastal Systems Engineering: commenced 2018 (led the successful Engineers Australia provisional accreditation in 2018) (Southern Cross University, Australia)
  • Master of Engineering Management (MEM) (Online) + Graduate Certificate in Engineering Management (Online): commenced 2015 (led the course design, and course implementation with the online provider) (Southern Cross University, Australia)
  • Master of Engineering Management/Master of Business Administration (MEM/MBA): commenced 2017 (supervised the course design) (Southern Cross University, Australia)

 

Subject Level

I have developed, coordinated and delivered a variety of undergraduate and postgraduate subjects over the years. Examples include (UG=Undergraduate, PG=Postgraduate):

  • Sustainable Development of the Built Environment (UG)
  • Engineering for Sustainable Development (UG)
  • Physics and Materials (UG)
  • Engineering Mechanics and Materials (UG)
  • Applied Mechanics (UG)
  • Analysis and Computer Modelling of Structures (UG)
  • Structural Analysis (UG)
  • Structural Design (UG)
  • Theory and Design of Structures (UG)
  • Research Ethics for Graduate Students (PG)
  • FRP Composites for Civil Engineering Applications (PG)

 

Supervised student prizes:

  • The Architectural Engineering Group Ingenuity Presentation Prize (2020) to Bahia Al Balushi, Alex Leuenberger, Margot Holbert, Sophie Wilkinson for the project The Conceptual Design for a Lunar Habitat, Informed by Both Practical Constraints and Human Wellbeing. (The University of Adelaide, Australia)
  • SCU Engineering Thesis Showcase Prize (2018) to Mr Shannon Eduards for thesis Tensile Strength Properties of two Australian Grown Solid Bamboo Species: Bambusa Polymorpha and Bambusa Tulda. (Southern Cross University, Australia)
  • Inaugural SCU Engineering Thesis Showcase Prize (2016) to Mr Dale Lindley for thesis Mechanical Properties of Australian Grown Bamboo. (Southern Cross University, Australia)
  • Best Paper Award in Structural and Mechanics Discipline (2011), Institution of Civil Engineers (ICE) Hong Kong Graduates and Students Papers Competition to Ms Jennyfer Tse for thesis Teaching Structural Engineering Sense. (The University of Hong Kong, China)
  • Two Dean’s Prize Winners and Best Poster Prize Winner at UTS for final year undergraduate projects in 2004 (Semester 1) and 2006 (Semester 2). (University of Technology Sydney, Australia)

  • Current Higher Degree by Research Supervision (University of Adelaide)
    Date Role Research Topic Program Degree Type Student Load Student Name
    2023 Principal Supervisor Sustainable Off-Earth Plant-based Construction Materials Doctor of Philosophy Doctorate Full Time Mr Kaled Mohammed A Al Aklobi
    2023 Principal Supervisor Sustainable 3D printed materials and structural systems for lunar structures utilising in-situ lunar resources Doctor of Philosophy Doctorate Full Time Mr Rayhan Md Faysal
    2023 Principal Supervisor Development of a sustainable large span hybrid FRP-steel flat panel system Doctor of Philosophy Doctorate Full Time Miss Therese Succar
    2022 Co-Supervisor Structural Form-finding Under Multiple Load Conditions for the Lunar Environment Doctor of Philosophy Doctorate Full Time Mr Seungil Lee
    2022 Co-Supervisor Structural Logistics of Repair in Lunar Habitat Design using Sintered Regolith Blocks Doctor of Philosophy Doctorate Full Time Miss Monika Stankiewicz
    2022 Principal Supervisor Sustainable Off-Earth Construction Materials and Structural Systems Utilising In-Situ Lunar Materials Doctor of Philosophy Doctorate Full Time Mr Mohammad Altaf Hossain
    2022 Principal Supervisor Hypervelocity Impact Resistant Structural Composite Panel Systems for Off-Earth Construction Doctor of Philosophy Doctorate Full Time Mr Md Abdur Rakib
    2020 Co-Supervisor Sintering and laser-processing of lunar regolith for the manufacture of lunar-base building materials Doctor of Philosophy Doctorate Part Time Mr Kevin Farries
    2020 Principal Supervisor Lunar Base Design and Construction Doctor of Philosophy Doctorate Part Time Mr John Culton

  • Past Higher Degree by Research Supervision (University of Adelaide)
    Date Role Research Topic Program Degree Type Student Load Student Name
    2024 - 2024 Co-Supervisor Experimental Investigation of Strength Improvement of Fractured Rocks by
    Polyurethane Resin Grouting    		 Master of Philosophy Master Full Time Mr Luong Tuan Anh Doan
    2021 - 2025 Co-Supervisor Damage detection in FRP-strengthened concrete structures utilising nonlinear guided waves Doctor of Philosophy Doctorate Full Time Mr Yuqiao Cao
    2020 - 2025 Principal Supervisor Concrete Columns Lightly-Confined with Sustainable Hybrid Fibre-Reinforced Polymer Jackets Doctor of Philosophy Doctorate Part Time Mr Xin Wang

  • Committee Memberships
    Date Role Committee Institution Country
    2021 - ongoing Founder Australian Society for Off-Earth Construction (ASOC) The University of Adelaide Australia
    2019 - ongoing Chair Associate Deans International (ADI) Network Australian Council of Engineering Deans Australia
    2018 - 2023 President International Institute for FRP in Construction IIFC Hong Kong
    2013 - ongoing Board Member Australian Council of Engineering Deans ACED Australia
    2013 - 2019 Board Member Australasian Association for Engineering Education AAEE Australia
    2012 - 2013 President Hong Kong Chapter, Engineers Australia EAHK Hong Kong

  • Community Engagement
    Date Title Engagement Type Institution Country
    2019 - 2019 Chair, Seventh Asia-Pacific Conference on FRP in Structures, APFIS 2019 , Surfers Paradise, Australia, 10-13 December 2019. Scientific Community Engagement APFIS 2019 Australia
    2014 - 2014 Chair, 23rd Australasian Conference on the Mechanics of Structures and Materials, ACMSM23, Byron Bay, 9-12 December 2014. Scientific Community Engagement ACMSM23 Australia
    2013 - 2013 Co-Chair, Fourth Asia-Pacific Conference on FRP in Structures, APFIS 2013, Melbourne, Australia, 11-13 December 2013. Scientific Community Engagement APFIS 2013 Australia
    2007 - 2007 Chair, First Asia-Pacific Conference on FRP in Structures, APFIS 2007, Hong Kong, 12-14 December 2007. Scientific Community Engagement APFIS 2007 Hong Kong

  • Editorial Boards
    Date Role Editorial Board Name Institution Country
    2016 - 2020 Editor Journal of Construction and Building Materials Elsevier United Kingdom
    2011 - 2017 Associate Editor Australian Journal of Civil Engineering Taylor & Francis United Kingdom
    2008 - 2021 Board Member Journal of Composites for Construction ASCE United States
  • Position: Deputy Dean (International)
  • Phone: 83130177
  • Email: scott.smith@adelaide.edu.au
  • Campus: North Terrace
  • Building: Engineering North, floor First Floor
  • Room: N156
  • Org Unit: Faculty of Sciences, Engineering and Technology
Connect With Me
External Profiles