Professor Scott Smith
Deputy Dean (International)
Office of Engineering and Information Technology
College of Engineering and Information Technology
Eligible to supervise Masters and PhD - email supervisor to discuss availability.
Professor Scott SmithBE(Hons) PhD (UNSW) MBA DIC (Imp) GradCertHEd (UTS)FRSN FRSSA FIEAust FASCE FACI FHKIE FIIFC FIABSE CPEng EngExec IntPE(Aus) NERScott Smith is Professor of Structural Engineering in the School of Architecture and Civil Engineering (ACE); Deputy Dean International (DDI) for the Faculty of Sciences, Engineering and Technology (SET); and Chair of Academic Board at The University of Adelaide, Australia. He is also co-Chair of the Transitional Academic Board for Adelaide University. Scott holds degrees in engineering, business, and education via BE (Civil) (1994) and PhD (1999) (specialising in structural engineering) (University of New South Wales, Australia); MBA and DIC (2018) (Imperial College London, UK); Graduate Certificate in Higher Education Teaching and Learning (2005) (University of Technology Sydney, Australia). Prior to commencing at The University of Adelaide in 2019, he has held roles of Founding Dean of Engineering at Southern Cross University, faculty member at The University of Hong Kong, and Postdoctoral Research Fellow at The Hong Kong Polytechnic University.Professor Smith has been entrusted with several leadership roles throughout his career, such as academic leadership (Deputy Dean International SET Faculty and Interim Head of School of Civil, Environmental and Mining Engineering at the University of Adelaide), research leadership (President, International Institute for FRP in Construction, IIFC), education leadership (Executive Committee member, Australasian Association for Engineering Education, AAEE), industry leadership (Chair, Engineers Australia Hong Kong Chapter), and service leadership (Executive Committee member, Australian Council of Engineering Deans, ACED). In recognition of his contributions to the profession, he has been elected to Fellowships of eight institutions around the world (Engineers Australia; American Concrete Institute; American Society of Civil Engineers; International Association for Bridge and Structural Engineering; Royal Society of NSW; Royal Society of SA; International Institute for FRP in Construction; The Hong Kong Institution of Engineers).Professor Smith researches in two main complementary areas, namely (i) materials, structures and construction practices for off-earth (extra-terrestrial) applications; and (ii) application of fibre-reinforced polymer (FRP) composites for repair and rehabilitation of existing built infrastructure as well as for new construction. He has published widely in the FRP composites in civil engineering field and has won several research awards such as Distinguished Young Researcher Award from the International Institute for FRP in Construction (IIFC), Warren Medal from Engineers Australia, Howard Medal from the UK Institution of Civil Engineers, as well as best paper awards at conferences. His research findings have been incorporated into design guidelines around the world via prominent organisations such as Standards Australia and the American Concrete Institute (ACI). To support his research activities, he has been awarded research funds in excess of AUD$14 million throughout his career. He has also published over 290 publications and delivered over 340 presentations in a professional capacityProfessor Smith keeps abreast of educational trends and practices, and also contributes to discourse in the sector, as a member of the Executive Committee of the Australian Association for Engineering Education (AAEE). Additionally, he is active in curriculum and pedagogy development in Australian and Hong Kong universities and has delivered a variety of subjects related to analysis and design (concrete, steel, timber) in structural engineering, engineering materials, repair and rehabilitation of the built environment, sustainable development, communication, and research ethics in a lecturing capacity since 2003 and a tutoring capacity since 1995. In recognition of his teaching efforts, he has won a Best Teacher Award from the Faculty of Engineering at The University of Hong Kong, and a Deputy Vice-Chancellor (Academic) Award for Team Excellence from The University of Adelaide.Professor Smith is Immediate Past President of the International Institute for FRP in Construction (IIFC, https://www.iifc.org/) of which the IIFC is an institute representing over 800 leaders around the world in academia and practice involved with research and application of FRP composites in the built environment. He served as President from 2018 to 2023. He is also Founding President of the Australian Society for Off-Earth Construction (ASOC, https://set.adelaide.edu.au/atcsr/australian-society-for-off-earth-construction), having commenced the Society in 2022. Professor Smith is the originator of two conference series, namely (i) Asia-Pacific Conference on FRP in Structures (APFIS) (founded in 2007) and (ii) International Symposium on Off-Earth Construction (ISOC) (founded in 2022).
Research Interests
Research interests include materials, structures and construction practices for off-earth (extra-terrestrial) applications; and application of fibre-reinforced polymer (FRP) composites for repair and rehabilitation of existing built infrastructure as well as for new construction.
4-digit Field of Research (FOR) Codes applicable to expertise:
0905 Civil Engineering
0912 Materials Engineering
0913 Mechanical Engineering
0915 Interdisciplinary Engineering
Funding
Research funds awarded in excess of AUD$11 million (i.e. Australian Research Council ARC-Discovery (DP), ARC-Linkage (LP), Industrial Transformation Research Hub (ITRH); Linkage, Infrastructure and Facilities (LIEF); RGC Hong Kong-General Research Fund (GRF); National Natural Science Foundation of China (NSFC); industry; contract research; internal to universities).
Visiting Appointments
Distinguished Visiting Professor, Tsinghua University, China (2019-2021)
Short-term Scholar; Columbia University, USA (2011)
Conferences
Chair, Ninth Asia-Pacific Conference on FRP in Structures, APFIS 2023, Adelaide, Australia, 1-4 December 2023.
Chair, First International Symposium on Off-Earth Construction, ISOC-1 2022, Adelaide, Australia, 24 October 2022.
Chair, Seventh Asia-Pacific Conference on FRP in Structures, APFIS 2019, Surfers Paradise, Australia, 10-13 December 2019.
Chair, 27th Australasian Association for Engineering Education Conference, AAEE 2016, Coffs Harbour, Australia, 5-7 December 2016.
Chair, 23rd Australasian Conference on the Mechanics of Structures and Materials, ACMSM23, Byron Bay, 9-12 December 2014.
Co-Chair, Fourth Asia-Pacific Conference on FRP in Structures, APFIS 2013, Melbourne, Australia, 11-13 December 2013.
Chair, First Asia-Pacific Conference on FRP in Structures, APFIS 2007, Hong Kong, 12-14 December 2007.
| Date | Position | Institution name |
|---|---|---|
| 2022 - ongoing | Deputy Dean (International) | The University of Adelaide |
| 2022 - ongoing | Deputy Chair, Academic Board | The University of Adelaide |
| 2022 - 2022 | Acting Academic Director, Haide College | The University of Adelaide |
| 2020 - 2022 | Interim Head; School of Civil, Environmental and Mining Engineering | The University of Adelaide |
| 2019 - 2022 | Deputy Dean (International); Faculty of Engineering, Computer and Mathematical Sciences | The University of Adelaide |
| 2019 - ongoing | Professor of Structural Engineering | The University of Adelaide |
| 2013 - 2019 | Foundation Professor of Engineering & Dean of Engineering; School of Environment, Science and Engineering | Southern Cross University |
| 2007 - 2012 | Assistant Professor to Associate Professor (Tenure); Department of Civil Engineering | The University of Hong Kong |
| 2003 - 2006 | Lecturer to Senior Lecturer; School of Civil and Environmental Engineering | University of Technology Sydney |
| 2002 - 2003 | Senior Research Associate; School of Civil and Environmental Engineering | The University of New South Wales |
| 1999 - 2001 | Postdoctoral Fellow; Department of Civil and Structural Engineering | Hong Kong Polytechnic University |
| 1995 - 1998 | PhD Candidate and Tutor; School of Civil and Environmental Engineering | The University of New South Wales |
| 1994 - 1994 | Graduate Engineer | Woolacotts Consulting Engineers |
| Date | Type | Title | Institution Name | Country | Amount |
|---|---|---|---|---|---|
| 2021 | Fellowship | Fellow | International Association for Bridge and Structural Engineering (IABSE) | Switzerland | - |
| 2021 | Fellowship | Fellow | Royal Society of South Australia (RSSA) | Australia | - |
| 2019 | Fellowship | Fellow | American Concrete Institute (ACI) | United States | - |
| 2017 | Research Award | APFIS 2017 Best Paper Award, 6th Asia-Pacific Conference on FRP in Structures, Singapore, 19-21 July 2017 | International Institute for FRP in Construction | Canada | - |
| 2017 | Fellowship | Fellow | Royal Society of New South Wales (RSNSW) | Australia | - |
| 2014 | Honour | Honorary Life Member | Golden Key International Honour Society | United States | - |
| 2012 | Fellowship | Fellow | The Hong Kong Institution of Engineers (HKIE) | Hong Kong | - |
| 2012 | Fellowship | Fellow | International Institute for FRP in Construction (IIFC) | Canada | - |
| 2012 | Fellowship | Fellow | American Society of Civil Engineers (ASCE) | United States | - |
| 2011 | Fellowship | Fellow | Engineers Australia (EA) | Australia | - |
| 2011 | Teaching Award | Best Teacher Award 2011-2012 | Faculty of Engineering, University of Hong Kong | Hong Kong | - |
| 2011 | Research Award | Warren Medal | Engineers Australia | Australia | - |
| 2010 | Research Award | Distinguished Young Researcher Award | International Institute for FRP in Construction (IIFC) | Canada | - |
| 2008 | Research Award | CICE 2008 Best Paper Award, 4th Int. Conference on FRP Composites in Civil Engineering, Switzerland, 22-24 July 2008 | International Institute for FRP in Construction (IIFC) | Canada | - |
| 2008 | Award | President's Award | International Institute for FRP in Construction (IIFC) | Canada | - |
| 2004 | Research Award | Howard Medal | Institution of Civil Engineers | United Kingdom | - |
| 1999 | Fellowship | Postdoctoral Fellowship | Hong Kong Polytechnic University | Hong Kong | - |
| Date | Institution name | Country | Title |
|---|---|---|---|
| 2016 - 2017 | Imperial College London | United Kingdom | MBA, DIC |
| 2005 - 2005 | University of Technology Sydney | Australia | GradCertHEd |
| 1995 - 1998 | University of New South Wales | Australia | PhD |
| 1990 - 1993 | University of New South Wales | Australia | BE(Hons) Civil (First Class Honours) |
| Date | Title | Institution name | Country |
|---|---|---|---|
| 2017 | Engineering Executive (EngExec) | Engineers Australia | Australia |
| 2017 | Asia-Pacific Economic Co-operation (APEC) Engineer Register | Asia-Pacific Economic Cooperation | Australia |
| 2013 | Registered Professional Eng in Queensland (RPEQ) | Board of Professional Engineers of Queensland | Australia |
| 1999 | Chartered Professional Engineer (CPEng) | Engineers Australia | Australia |
| 1999 | Australian National Engineering Register (NER) | Engineers Australia | Australia |
| Year | Citation |
|---|---|
| 2025 | Tafsirojjaman, T., Smith, S. T., & Hossain, M. A. (2025). Development of Regolith-Resin-Composite (RRC) Material for Lunar Construction. Acta Astronautica, 228, 652-663. Scopus3 WoS3 |
| 2025 | Lee, S., Bennett, T., Smith, S. T., & Kring, D. A. (2025). Stability and form-finding of shelters subjected to moonquakes of the lunar south polar region. Acta Astronautica, 234, 106-116. Scopus1 WoS1 |
| 2025 | Yuan, W., Smith, S. T., Tafsirojjaman, T., Wang, D., Shen, F., & Cai, Z. K. (2025). Experimental investigation on the resilience-based seismic retrofitting of non-uniformly corroded bridge columns using FRP wraps and bars. Construction and Building Materials, 502, 144447. |
| 2025 | Cao, Y., Jiang, C., Ng, C. T., & Smith, S. T. (2025). Thermal damage detection in FRP-strengthened reinforced concrete structures using ultrasonic guided waves. NDT and E International, 152, 103329-1-103329-11. Scopus4 WoS3 |
| 2024 | Lee, S., Bennett, T., & Smith, S. T. (2024). Rotated Thrust Network Analysis (rTNA) for stability assessment of vaulted structures subjected to horizontal loading. Computers & Structures, 297, 107324. Scopus2 WoS2 |
| 2024 | Cao, Y., Hu, X., Ng, C. T., & Smith, S. T. (2024). Diagnostic imaging of debonding in FRP-strengthened reinforced concrete structures using combinational harmonics generated by Rayleigh waves. Engineering Structures, 314, 118377-1-118377-11. Scopus12 WoS10 |
| 2024 | Rakib, M. A., Smith, S. T., & Tafsirojjaman, T. (2024). A Review of Shielding Systems for Protecting Off-Earth Structures from Micrometeoroid and Orbital Debris Impact. Acta Astronautica, 223, 404-425. Scopus9 WoS9 |
| 2024 | Feng, Y., Sheikh, A. H., Ng, C. -T., & Smith, S. T. (2024). Dynamic response of delaminated composite and sandwich beams using an efficient sub-lamented based higher order laminate model. Mechanics Based Design of Structures and Machines, 52(8), 5147-5173. Scopus3 WoS2 |
| 2023 | Farries, K. W., Visintin, P., & Smith, S. T. (2023). A pilot study of laser-welding cast basalt blocks for lunar construction. Case Studies in Construction Materials, 19, 16 pages. Scopus10 WoS7 |
| 2023 | Xue, S., Li, X., Liu, Y., Smith, S. T., Dogar, A. U. R., Li, X., & Tafsirojjaman, T. (2023). A novel winding–wedge anchorage for CFRP straps: Conceptual design and performance evaluation. Case Studies in Construction Materials, 19, e02636. Scopus7 WoS7 |
| 2023 | Tang, Z. S., Lim, Y. Y., Smith, S. T., Mostafa, A., Lam, A. C., & Soh, C. K. (2023). Monitoring the curing process of in-situ concrete with piezoelectric-based techniques - A practical application. STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 22(1), 518-539. Scopus31 WoS32 |
| 2023 | Ke, Y., Zhang, S. S., Smith, S. T., & Yu, T. (2023). Novel Embedded FRP Anchor for RC Beams Strengthened in Flexure with NSM FRP Bars: Concept and Behavior. Journal of Composites for Construction, 27(1), 15 pages. Scopus19 WoS14 |
| 2023 | Ghanbari-Ghazijahani, T., Hassanli, R., Manalo, A., Smith, S. T., Vincent, T., Gravina, R., & Zhuge, Y. (2023). Cyclic Behavior of Beam-Column Pocket Connections in GFRP-Reinforced Precast Concrete Assemblages. Journal of Composites for Construction, 27(2), 17 pages. Scopus14 WoS14 |
| 2023 | Feng, Y., Sheikh, A. H., Ng, C. -T., & Smith, S. T. (2023). An efficient modelling technique for simulation of guided waves in delaminated composite and sandwich structures. Journal of Sound and Vibration, 566, 117929-1-117929-22. Scopus10 WoS9 |
| 2023 | Cao, Y., Ng, C. T., & Smith, S. T. (2023). Debonding detection in FRP-strengthened concrete structures utilising nonlinear Rayleigh wave mixing. Measurement: Journal of the International Measurement Confederation, 214, 10 pages. Scopus19 WoS15 |
| 2022 | Farries, K. W., Visintin, P., & Smith, S. T. (2022). Direct laser sintering for lunar dust control: An experimental study of the effect of simulant mineralogy and process parameters on product strength and scalability. Construction and Building Materials, 354, 22 pages. Scopus26 WoS21 |
| 2022 | Feng, Y., Muni Rami Reddy, R., Sheikh, A. H., Ng, C. -T., & Smith, S. T. (2022). A sub-laminate based higher-order model for bending of laminated beams containing multiple delaminations. Composite Structures, 294, 15 pages. Scopus6 WoS5 |
| 2022 | Ye, Y. Y., Zhuge, Y., Smith, S. T., Zeng, J. J., & Bai, Y. L. (2022). Behavior of GFRP-RC columns under axial compression: Assessment of existing models and a new axial load-strain model. Journal of Building Engineering, 47, 26 pages. Scopus39 WoS39 |
| 2022 | Sirach, N., Smith, S. T., Yu, T., & Mostafa, A. (2022). Axial compressive behaviour of circular FRP-confined multi-tube concrete columns. Composite Structures, 281, 19 pages. Scopus17 WoS17 |
| 2021 | Sirach, N., Smith, S. T., Yu, T., & Mostafa, A. (2021). Experimental Study on the Confinement of Concrete Cylinders with Large Rupture-Strain FRP Composites. Journal of Composites for Construction, 25(4), 04021026-1-04021026-17. Scopus30 WoS26 |
| 2021 | Ye, Y. Y., Smith, S. T., Zeng, J. J., Zhuge, Y., & Quach, W. M. (2021). Novel ultra-high-performance concrete composite plates reinforced with FRP grid: Development and mechanical behaviour. Composite Structures, 269, 114033. Scopus71 WoS69 |
| 2021 | Farries, K. W., Visintin, P., Smith, S. T., & van Eyk, P. (2021). Sintered or melted regolith for lunar construction: state-of-the-art review and future research directions. Construction and Building Materials, 296, 1-31. Scopus130 WoS107 |
| 2021 | Hassanli, R., Vincent, T., Manalo, A., Smith, S. T., Gholampour, A., Gravina, R., & Zhuge, Y. (2021). Connections in GFRP reinforced precast concrete frames. Composite Structures, 276, 19 pages. Scopus17 WoS15 |
| 2021 | Hassanli, R., Vincent, T., Manalo, A., Smith, S. T., Gholampour, A., & Gravina, R. (2021). Large-scale experimental study on pocket connections in GFRP-reinforced precast concrete frames. Structures, 34, 523-541. Scopus20 WoS19 |
| 2021 | Zhang, S. S., Ke, Y., Smith, S. T., Zhu, H. P., & Wang, Z. L. (2021). Effect of FRP U-jackets on the behaviour of RC beams strengthened in flexure with NSM CFRP strips. Composite Structures, 256, 113095. Scopus64 WoS59 |
| 2021 | Cai, Z. K., Yuan, W., Wang, Z., & Smith, S. T. (2021). Seismic behavior of precast segmental bridge columns reinforced with hybrid FRP-steel bars. Engineering Structures, 228, 1-12. Scopus54 WoS50 |
| 2021 | Lim, Y. Y., Smith, S. T., Padilla, R. V., & Soh, C. K. (2021). Monitoring of concrete curing using the electromechanical impedance technique: review and path forward. Structural Health Monitoring, 20(2), 604-636. Scopus74 WoS73 |
| 2020 | Zeng, J. J., Ye, Y. Y., Gao, W. Y., Smith, S. T., & Guo, Y. C. (2020). Stress-strain behavior of polyethylene terephthalate fiber-reinforced polymer-confined normal-, high- and ultra high-strength concrete. Journal of Building Engineering, 30, 17 pages. Scopus128 WoS125 |
| 2020 | Ma, C., Wang, Z., & Smith, S. T. (2020). Seismic Performance of Large-Scale RC Eccentric Corner Beam-Column-Slab Joints Strengthened with CFRP Systems. JOURNAL OF COMPOSITES FOR CONSTRUCTION, 24(2), 17 pages. Scopus21 WoS21 |
| 2020 | Li, J., Gravina, R. J., Smith, S. T., & Visintin, P. (2020). Bond strength and bond stress-slip analysis of FRP bar to concrete incorporating environmental durability. Construction and Building Materials, 261, 1-12. Scopus33 WoS29 |
| 2020 | Wu, Y. F., Zhou, Y. W., Hu, B., Huang, X., & Smith, S. (2020). Fused structures for safer and more economical constructions. Frontiers of Structural and Civil Engineering, 14(1), 1-9. Scopus13 WoS13 |
| 2020 | Yang, J. Q., Smith, S. T., Wang, Z., Feng, P., & Sirach, N. (2020). Modelling of hysteresis behaviour of moment-resisting timber joints strengthened with FRP composites. International Journal of Mechanical Sciences, 179, 17 pages. Scopus17 WoS15 |
| 2020 | Li, J., Gravina, R., Visintin, P., & Smith, S. T. (2020). Durability and long-term performance of FRP-to-concrete joints under environmental conditioning: experimental and analytical study. Journal of Composites for Construction, 24(4), 1-24. Scopus13 WoS12 |
| 2020 | Gravina, R. J., Li, J., Smith, S. T., & Visintin, P. (2020). Environmental durability of FRP bar-to-concrete bond: critical review. Journal of Composites for Construction, 24(4), 1-18. Scopus52 WoS40 |
| 2020 | Yang, J. Q., Smith, S. T., Wu, Y. F., & Feng, P. (2020). Strengthening single-bolt timber joints with externally bonded CFRP composites. Structures, 28, 2671-2685. Scopus18 WoS17 |
| 2020 | Tang, Z. S., Lim, Y. Y., Smith, S. T., & Padilla, R. V. (2020). Modelling of the electromechanical impedance technique for prediction of elastic modulus of structural adhesives. Structural Health Monitoring, 20(5), 1-16. Scopus20 WoS20 |
| 2019 | Tang, Z. S., Lim, Y. Y., Smith, S. T., & Izadgoshasb, I. (2019). Development of analytical and numerical models for predicting the mechanical properties of structural adhesives under curing using the PZT-based wave propagation technique. Mechanical Systems and Signal Processing, 128, 172-190. Scopus35 WoS33 |
| 2019 | Lim, Y. Y., Tang, Z. S., & Smith, S. T. (2019). Piezoelectric-based monitoring of the curing of structural adhesives: A novel experimental study. Smart Materials and Structures, 28(1), 1-19. Scopus54 WoS47 |
| 2019 | del Rey Castillo, E., Kanitkar, R., Smith, S., Griffith, M., & Ingham, J. (2019). Design approach for FRP spike anchors in FRP-strengthened RC structures. Composite Structures, 214, 23-33. Scopus72 WoS48 |
| 2019 | Yang, J. Q., Smith, S. T., & Wang, Z. (2019). Seismic behaviour of fibre-reinforced-polymer- and steel-strengthened timber connections. Advances in Structural Engineering, 22(2), 502-518. Scopus10 WoS11 |
| 2019 | Sturm, A. B., Visintin, P., Vaculik, J., Oehlers, D. J., Seracino, R., & Smith, S. T. (2019). Analytical approach for global load-slip behaviour of FRP plates externally bonded to brittle substrates with anchors. Composites Part B: Engineering, 160, 177-194. Scopus14 WoS11 |
| 2018 | Visintin, P., & Smith, S. T. (2018). Editorial: Materials development and innovation. Australian Journal of Civil Engineering, 16(2), 79-80. |
| 2018 | Kalfat, R., Gadd, J., Al-Mahaidi, R., & Smith, S. T. (2018). An efficiency framework for anchorage devices used to enhance the performance of FRP strengthened RC members. Construction and Building Materials, 191, 354-375. Scopus48 WoS38 |
| 2018 | Lim, Y. Y., Smith, S. T., & Soh, C. K. (2018). Wave propagation based monitoring of concrete curing using piezoelectric materials: Review and path forward. NDT and E International, 99, 50-63. Scopus70 WoS62 |
| 2018 | Dias-Da-Costa, D., Graça-E-Costa, R., Ranzi, G., & Smith, S. T. (2018). Assessment of the behavior of FRP-strengthened RC slabs using a discrete crack model. Journal of Composites for Construction, 22(6), 04018045-1-04018045-14. Scopus12 WoS10 |
| 2018 | Isleem, H. F., Wang, Z., Wang, D., & Smith, S. T. (2018). Monotonic and Cyclic Axial Compressive Behavior of CFRP-Confined Rectangular RC Columns. Journal of Composites for Construction, 22(4), 04018023. Scopus52 WoS49 |
| 2018 | Yang, J. Q., Smith, S. T., Wang, Z., & Lim, Y. Y. (2018). Numerical simulation of FRP-strengthened RC slabs anchored with FRP anchors. Construction and Building Materials, 172, 735-750. Scopus38 WoS31 |
| 2017 | Zhang, H., Smith, S. T., Gravina, R. J., & Wang, Z. (2017). Modelling of FRP-concrete bonded interfaces containing FRP anchors. Construction and Building Materials, 139, 394-402. Scopus43 WoS37 |
| 2017 | Zhang, H., & Smith, S. T. (2017). Influence of plate length and anchor position on FRP-to-concrete joints anchored with FRP anchors. Composite Structures, 159, 615-624. Scopus52 WoS49 |
| 2017 | Lin, J. P., Wu, Y. F., & Smith, S. T. (2017). Width factor for externally bonded FRP-to-concrete joints. Construction and Building Materials, 155, 818-829. Scopus36 WoS35 |
| 2017 | Hadigheh, S. A., Gravina, R. J., & Smith, S. T. (2017). Effect of acid attack on FRP-to-concrete bonded interfaces. Construction and Building Materials, 152, 285-303. Scopus77 WoS63 |
| 2017 | Smith, S. T. (2017). Editorial. Proceedings of the Institution of Civil Engineers Structures and Buildings, 170(5), 319-320. |
| 2017 | Smith, S. T., Rasheed, H. A., & Kim, S. J. (2017). Full-range load-deflection response of FRP-strengthened RC flexural members anchored with FRP anchors. Composite Structures, 167, 207-218. Scopus36 WoS31 |
| 2017 | Wang, D., Wang, Z., Smith, S. T., & Yu, T. (2017). Seismic performance of CFRP-confined circular high-strength concrete columns with high axial compression ratio. Construction and Building Materials, 134, 91-103. Scopus73 WoS65 |
| 2016 | Ozbakkaloglu, T., Chen, J. F., Smith, S. T., & Dai, J. G. (2016). Applications of fiber reinforced polymer composites. International Journal of Polymer Science, 2016, 5804145-1. Scopus6 WoS4 |
| 2016 | Zhang, H., Smith, S. T., & Gravina, R. J. (2016). Analysis of FRP-to-concrete interfaces using a displacement driven partial interaction model. International Journal of Mechanical Sciences, 117, 210-217. Scopus10 WoS10 |
| 2016 | Wang, D. Y., Wang, Z. Y., Smith, S. T., & Yu, T. (2016). Size effect on axial stress-strain behavior of CFRP-confined square concrete columns. Construction and Building Materials, 118, 116-126. Scopus149 WoS140 |
| 2016 | Anderson, D. J., Smith, S. T., & Au, F. T. K. (2016). Mechanical properties of concrete utilising waste ceramic as coarse aggregate. Construction and Building Materials, 117, 20-28. Scopus172 WoS135 |
| 2016 | Cai, Z., Wang, D., Smith, S. T., & Wang, Z. (2016). Experimental investigation on the seismic performance of GFRP-wrapped thin-walled steel tube confined RC columns. Engineering Structures, 110, 269-280. Scopus52 WoS47 |
| 2016 | Li, D., Smith, S., & Ma, X. (2016). End condition effect on initial buckling performance of thin plates resting on tensionless elastic or rigid foundations. International Journal of Mechanical Sciences, 105, 83-89. Scopus18 WoS16 |
| 2015 | Smith, S. T. (2015). Editorial. Proceedings of the Institution of Civil Engineers Structures and Buildings, 168(9), 617-618. |
| 2015 | Wu, Y. F., Li, G., Smith, S. T., & Xu, R. (2015). Special issue on applications of engineering composites: Materials, structures, and interfaces. Advances in Mechanical Engineering, 7(7), 1. |
| 2015 | Smith, S. T. (2015). Editorial. Proceedings of the Institution of Civil Engineers Structures and Buildings, 168(1), 1-2. WoS1 |
| 2015 | Smith, S. T. (2015). Editorial. Proceedings of the Institution of Civil Engineers Structures and Buildings, 168(9), 617-618. |
| 2014 | Smith, S. T., & Chen, J. F. (2014). Special issue on the 10th anniversary of IIFC. Journal of Composites for Construction, 18(3), 1 page. |
| 2014 | Wan, J., Smith, S. T., Qiao, P., & Chen, F. (2014). Experimental investigation on FRP-to-timber bonded interfaces. Journal of Composites for Construction, 18(3), A4013006-1-A4013006-9. Scopus58 WoS46 |
| 2014 | Zhao, X. L., Al-Mahaidi, R., Bai, Y., & Smith, S. T. (2014). FRP strengthening of structures subject to fatigue, impact and environmental loading. Advances in Structural Engineering, 17(12), i. Scopus1 |
| 2013 | Shrestha, R., Smith, S. T., & Samali, B. (2013). Finite element modelling of FRP-strengthened RC beam-column connections with ANSYS. Computers and Concrete, 11(1), 1-20. Scopus20 WoS16 |
| 2013 | Smith, S. T., Zhang, H., & Wang, Z. (2013). Influence of FRP anchors on the strength and ductility of FRP-strengthened RC slabs. Construction and Building Materials, 49, 998-1012. Scopus100 WoS80 |
| 2013 | Zhang, H., & Smith, S. T. (2013). Fibre-reinforced polymer (FRP)-to-concrete joints anchored with FRP anchors: Tests and experimental trends. Canadian Journal of Civil Engineering, 40(11), 1103-1116. Scopus41 WoS33 |
| 2013 | Yang, J. Q., Smith, S. T., & Feng, P. (2013). Effect of FRP-to-steel bonded joint configuration on interfacial stresses: Finite element investigation. Thin Walled Structures, 62, 215-228. Scopus38 WoS34 |
| 2013 | Kalfat, R., Al-Mahaidi, R., & Smith, S. T. (2013). Anchorage devices used to improve the performance of reinforced concrete beams retrofitted with FRP composites: State-of-the-art review. Journal of Composites for Construction, 17(1), 14-33. Scopus348 WoS270 |
| 2013 | Smith, S. T. (2013). Editorial. Proceedings of the Institution of Civil Engineers Structures and Buildings, 166(1), 1. WoS23 |
| 2012 | Wang, Z., Wang, D., Smith, S. T., & Lu, D. (2012). CFRP-confined square RC columns. I: experimental investigation. Journal of Composites for Construction, 16(2), 150-160. Scopus220 WoS193 |
| 2012 | Wang, Z., Wang, D., Smith, S. T., & Lu, D. (2012). CFRP-confined square RC columns. II: cyclic axial compression stress-strain model. Journal of Composites for Construction, 16(2), 161-170. Scopus113 WoS93 |
| 2012 | Zhang, H. W., & Smith, S. T. (2012). Influence of FRP anchor fan configuration and dowel angle on anchoring FRP plates. Composites Part B Engineering, 43(8), 3516-3527. Scopus120 WoS102 |
| 2012 | Wang, Z., Wang, D., Smith, S. T., & Lu, D. (2012). Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression. Engineering Structures, 40, 64-74. Scopus196 WoS170 |
| 2012 | Xu, L. J., Lu, X. Z., Smith, S. T., & He, S. T. (2012). Scaled model test for collision between over-height truck and bridge superstructure. International Journal of Impact Engineering, 49, 31-42. Scopus71 WoS56 |
| 2012 | Zhang, H. W., & Smith, S. T. (2012). FRP-to-concrete joint assemblages anchored with multiple FRP anchors. Composite Structures, 94(2), 403-414. Scopus96 WoS84 |
| 2012 | Loo, K. Y. M., Foster, S. J., & Smith, S. T. (2012). Fatigue behavior of carbon fiber-reinforced polymer-repaired corroded reinforced concrete beams. ACI Structural Journal, 109(6), 795-803. Scopus10 WoS9 |
| 2012 | Loo, K. Y. M., Foster, S. J., & Smith, S. T. (2012). FE modeling of CFRP-repaired RC beams subjected to fatigue loading. Journal of Composites for Construction, 16(5), 572-580. Scopus18 WoS14 |
| 2012 | Zhang, H. W., Smith, S. T., & Kim, S. J. (2012). Optimisation of carbon and glass FRP anchor design. Construction and Building Materials, 32, 1-12. Scopus125 WoS95 |
| 2011 | Wang, K., Young, B., & Smith, S. T. (2011). Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures. Engineering Structures, 33(7), 2154-2161. Scopus236 WoS203 |
| 2011 | Schmidt, J. W., Smith, S. T., Tljsten, B., Bennitz, A., Goltermann, P., & Pedersen, H. (2011). Numerical simulation and experimental validation of an integrated sleeve-wedge anchorage for CFRP rods. Journal of Composites for Construction, 15(3), 284-292. Scopus32 WoS26 |
| 2011 | Shrestha, R., Smith, S. T., & Samali, B. (2011). The effectiveness of FRP strips in repairing moderately and severely damaged RC beam-column connections. Magazine of Concrete Research, 63(9), 629-644. Scopus4 WoS3 |
| 2011 | Seliem, H. M., Seracino, R., Sumner, E. A., & Smith, S. T. (2011). Case study on the restoration of flexural capacity of continuous one-way RC slabs with cutouts. Journal of Composites for Construction, 15(6), 992-998. Scopus20 WoS18 |
| 2011 | Smith, S. T., Hu, S., Kim, S. J., & Seracino, R. (2011). FRP-strengthened RC slabs anchored with FRP anchors. Engineering Structures, 33(4), 1075-1087. Scopus220 WoS179 |
| 2010 | Smith, S. T., & Kim, S. J. (2010). Deflection calculation of FRP-strengthened reinforced concrete flexural members. Australian Journal of Structural Engineering, 11(2), 75-86. Scopus11 WoS8 |
| 2010 | Su, R. K. L., Siu, W. H., & Smith, S. T. (2010). Effects of bolt-plate arrangements on steel plate strengthened reinforced concrete beams. Engineering Structures, 32(6), 1769-1778. Scopus69 WoS54 |
| 2010 | Kim, S. J., & Smith, S. T. (2010). Pullout strength models for FRP anchors in uncracked concrete. Journal of Composites for Construction, 14(4), 406-414. Scopus119 WoS89 |
| 2010 | Khomwan, N., Foster, S. J., & Smith, S. T. (2010). FE modeling of FRP-repaired planar concrete elements subjected to monotonic and cyclic loading. Journal of Composites for Construction, 14(6), 720-729. Scopus11 WoS9 |
| 2010 | Smith, S. T., Kim, S. J., & Zhang, H. (2010). Behavior and effectiveness of FRP wrap in the confinement of large concrete cylinders. Journal of Composites for Construction, 14(5), 573-582. Scopus153 WoS139 |
| 2009 | Shrestha, R., Smith, S. T., & Samali, B. (2009). Strengthening RC beam-column connections with FRP strips. Proceedings of the Institution of Civil Engineers Structures and Buildings, 162(5), 323-334. Scopus38 WoS32 |
| 2009 | Smith, S. T., & Kim, S. J. (2009). Strengthening of one-way spanning RC slabs with cutouts using FRP composites. Construction and Building Materials, 23(4), 1578-1590. Scopus47 WoS38 |
| 2009 | Chen, J. F., Teng, J. G., & Smith, S. T. (2009). Advances in Structural Engineering: Guest editorial. Advances in Structural Engineering, 12(6). |
| 2009 | Chen, J. F., Teng, J. G., & Smith, S. T. (2009). Guest Editorial. Advances in Structural Engineering, 12(6), i. |
| 2008 | Gravina, R. J., & Smith, S. T. (2008). Flexural behaviour of indeterminate concrete beams reinforced with FRP bars. Engineering Structures, 30(9), 2370-2380. Scopus110 WoS94 |
| 2008 | Yuan, X. F., Xia, S. H., Lam, L., & Smith, S. T. (2008). Analysis and behaviour of FRP-confined short concrete columns subjected to eccentric loading. Journal of Zhejiang University Science A, 9(1), 38-49. Scopus18 WoS17 |
| 2007 | Smith, S. T., & Gravina, R. J. (2007). Modeling debonding failure in FRP flexurally strengthened RC members using a local deformation model. Journal of Composites for Construction, 11(2), 184-191. Scopus49 WoS38 |
| 2003 | Teng, J. G., Chen, J. F., Smith, S. T., Lam, L., & Jessop, T. (2003). Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review. PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 156(3), 334-335. WoS18 |
| 2003 | Smith, S. T., & Teng, J. G. (2003). Shear-bending interaction in debonding failures of FRP-plated RC beams. Advances in Structural Engineering, 6(3), 183-199. Scopus163 |
| 2003 | Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2003). Behaviour and strength of FRP-strengthened RC structures: A state-of-the-art review. Proceedings of the Institution of Civil Engineers Structures and Buildings, 156(1), 51-62. Scopus370 WoS258 |
| 2003 | Teng, J. G., Smith, S. T., Yao, J., & Chen, J. F. (2003). Intermediate crack-induced debonding in RC beams and slabs. Construction and Building Materials, 17(6-7), 447-462. Scopus643 WoS545 |
| 2003 | Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2003). Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review. Structures <html_ent glyph="@amp;" ascii="&amp;"/> Buildings, 156(1), 51-62. |
| 2002 | Smith, S. T., & Teng, J. G. (2002). FRP-strengthened RC beams. II: Assessment of debonding strength models. Engineering Structures, 24(4), 397-417. Scopus297 WoS258 |
| 2002 | Teng, J. G., Zhang, J. W., & Smith, S. T. (2002). Interfacial stresses in reinforced concrete beams bonded with a soffit plate: A finite element study. Construction and Building Materials, 16(1), 1-14. Scopus174 WoS156 |
| 2002 | Smith, S. T., & Teng, J. G. (2002). FRP-strengthened RC beams. I: Review of debonding strength models. Engineering Structures, 24(4), 385-395. Scopus557 WoS456 |
| 2001 | Smith, S. T., & Teng, J. G. (2001). Interfacial stresses in plated beams. Engineering Structures, 23(7), 857-871. Scopus528 WoS458 |
| 2001 | Smith, S., Bradford, M., & Oehlers, D. (2001). Buckling tests on steel plates restrained at discrete points in the retrofit of reinforced concrete beams. Proceedings of the Institution of Civil Engineers-structures and Buildings, 146(2), 115-127. Scopus9 WoS7 |
| 2001 | Smith, S. T., Bradford, M. A., & Oehlers, D. J. (2001). Buckling tests on steel plates restrained at discrete points in the retrofit of reinforced concrete beams. Structures <html_ent glyph="@amp;" ascii="&amp;"/> Buildings, 146(2), 115-127. |
| 2000 | Smith, S., Bradford, M., & Oehlers, D. (2000). Unilateral buckling of elastically restrained rectangular mild steel plates. Computational Mechanics, 26(4), 317-324. Scopus24 WoS18 |
| 2000 | Bradford, M., Smith, S., & Oehlers, D. (2000). Semi-compact steel plates with unilateral restraint subjected to bending, compression and shear. Journal of Constructional Steel Research, 56(1), 47-67. Scopus34 WoS31 |
| 1999 | Smith, S., Bradford, M., & Oehlers, D. (1999). Local Buckling of Side-plated Reinforced Oncrete Beams. Part 2 :Experimental Study. Journal of Structural Engineering, 125(6), 635-642. Scopus52 WoS46 |
| 1999 | Smith, S., Bradford, M., & Oehlers, D. (1999). Local Buckling of Side-Plated Reinforced Concrete Beams. Part 1 : Theoretical Study. Journal of Structural Engineering, 125(6), 622-634. Scopus58 WoS47 |
| 1999 | Smith, S., Bradford, M., & Oehlers, D. (1999). Elastic buckling of unilaterally constrained rectangular plates in pure shear. Journal of Engineering Structures, 21(5), 443-453. Scopus80 WoS66 |
| 1999 | Smith, S., Bradford, M., & Oehlers, D. (1999). Numerical Convergence of Simple and Orthogonal polynomials for the Unilateral Plate Buckling Problem using the Rayleigh-Ritz Method. International Journal for Numerical Methods in Engineering, 44(11), 1685-1707. Scopus70 WoS62 |
| Year | Citation |
|---|---|
| 2016 | Bahadori, A., & Smith, S. T. (2016). Dictionary of Environmental Engineering and Wastewater Treatment. Springer. |
| 2008 | Oehlers, D., Seracino, R., & Smith, S. (2008). Design handbook for RC structures retrofitted with FRP and metal plates: beams and slabs. Australia: Standards Publishing Department (of Standards Australia). |
| 2002 | Teng, J. G., Chen, J. F., Smith, S. T., & Lam, L. (2002). FRP Strengthened RC Structures. Wiley-Blackwell. |
| Year | Citation |
|---|---|
| 2008 | Teng, J. G., Smith, S. T., & Chen, J. F. (2008). Design guidelines for fibre-reinforced polymer (FRP)-strengthened reinforced concrete (RC) structures. In Strengthening and Rehabilitation of Civil Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites (pp. 195-214). Elsevier. DOI Scopus9 |
| 2008 | Teng, J. G., Smith, S. T., & Chen, J. F. (2008). Flexural strengthening of reinforced concrete (RC) beams with fibre-reinforced polymer (FRP) composites. In Strengthening and Rehabilitation of Civil Infrastructures Using Fibre-Reinforced Polymer (FRP) Composites (pp. 112-140). Elsevier. DOI Scopus7 |
| Year | Citation |
|---|---|
| 2025 | Tafsirojjaman, T., Smith, S. T., Rakib, M. A., Sheikh, A. H., Evangelista, J., & Rassias, H. (2025). Development of a Stuffed Whipple Shield for Radiation Protection of Lunar Structures. In Lecture Notes in Civil Engineering Vol. 557 LNCE (pp. 176-183). Riyadh: Springer Nature Singapore. DOI Scopus1 |
| 2024 | Stankiewicz, M. E. B., Srivastava, A., & Smith, S. T. (2024). Designing for Repair and Repairability in Lunar Habitats: Preliminary Investigations in Regolith Block Based Construction. In Proceedings of the International Astronautical Congress, IAC (pp. 6-16). Milan: International Astronautical Federation (IAF). DOI |
| 2024 | Lee, S., Bennett, T., & Smith, S. T. (2024). Stability Assessment of Masonry Domes Using Thrust Network Analysis in Earth and Lunar Environments. In Lecture Notes in Civil Engineering Vol. 513 LNCE (pp. 123-133). Auckland, NZ: Springer Nature Singapore. DOI |
| 2024 | Hossain, M. A., Smith, S. T., & Tafsirojjaman, T. (2024). Mechanical Properties of Regolith-Resin-Based Composite (RRC) for Lunar Construction Utilizing In Situ Resources. In Earth and Space 2024: Engineering for Extreme Environments - Proceedings of the 19th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (pp. 995-1005). Miami, Florida: Aerospace Division of the American Society of Civil Engineers (ASCE). DOI Scopus1 WoS1 |
| 2024 | Rakib, M. A., Smith, S. T., & Tafsirojjaman, T. (2024). Behavior of Stuffed Whipple Shields Subjected to Micrometeoroid and Orbital Debris Impact. In Earth and Space 2024: Engineering for Extreme Environments - Proceedings of the 19th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (pp. 509-516). Miami, Florida: American Society of Civil Engineers (ASCE). DOI Scopus1 WoS1 |
| 2024 | Stankiewicz, M. E. B., Srivastava, A., & Smith, S. T. (2024). Towards Resilient Lunar Architecture: A Systematic Literature Review of Earth-Based Repair Frameworks for Use in Lunar Construction. In Earth and Space 2024: Engineering for Extreme Environments - Proceedings of the 19th Biennial International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (pp. 833-843). Miami, Florida: American Society of Civil Engineers (ASCE). DOI Scopus1 |
| 2023 | Doan, L. T. A., Karakus, M., Nguyen, G. D., Smith, S., Chester, C., & Hawker, R. (2023). Estimating the Hydraulic Conductivity of jointed rock mass using Genetic Programming. In IOP Conference Series: Earth and Environmental Science Vol. 1124 (pp. 012001). Online: IOP Publishing. DOI Scopus4 WoS1 |
| 2021 | Gravina, R. J., Li, J., Smith, S. T., & Visintin, P. (2021). Review of FRP Bar to Concrete Bond in Hygrothermal Conditions. In Lecture Notes in Civil Engineering Vol. 198 LNCE (pp. 942-951). Online: Springer International Publishing. DOI |
| 2021 | Wu, Y. F., Zhou, Y. W., Hu, B., Huang, X. X., & Smith, S. T. (2021). Fused bridge structures for higher impact resistance. In Lecture Notes in Civil Engineering Vol. 101 (pp. 611-623). Singapore: Springer Singapore. DOI |
| 2020 | Farries, K. W., Visintin, P., & Smith, S. T. (2020). Construction of lunar masonry habitats using laser-processed bricks. In Proceedings of the 71st International Astronautical Congress, IAC 2020 Vol. 2020-October. online: IAF. Scopus3 |
| 2020 | Smith, S. T., & Shrestha, R. (2020). A review of FRPstrengthened RC beamcolumn connections. In Composites in Civil Engineering Cice 2006 (pp. 661-664). Scopus15 |
| 2020 | Crews, K. I., & Smith, S. T. (2020). Tests on FRPstrengthened timber joints. In Composites in Civil Engineering Cice 2006 (pp. 677-680). Scopus7 |
| 2020 | Kaul, R., Sri Ravindrarajah, R., & Smith, S. T. (2020). Deformational behaviour of FRP confined concrete under sustained compression. In Composites in Civil Engineering Cice 2006 (pp. 207-210). Scopus4 |
| 2020 | Otoom, O. F. A., Smith, S. T., & Foster, S. J. (2020). Finite element modelling of FRP shearstrengthened RC beams. In Composites in Civil Engineering Cice 2006 (pp. 437-440). Scopus4 |
| 2020 | Yang, J., Smith, S., & Feng, P. (2020). FRP-to-metal bonds: Effect of test specimen configuration on interfacial stresses. In APFIS 2012 - 3rd Asia-Pacific Conference on FRP in Structures. |
| 2020 | Tang, Z. S., Lim, Y. Y., & Smith, S. T. (2020). A study on monitoring the curing process of structural adhesives using wave propagation. In Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials (ACMSM25 ), as published in Lecture Notes in Civil Engineering Vol. 37 (pp. 879-885). Singapore: Springer. DOI |
| 2020 | Sirach, N., Smith, S. T., Yu, T., & Mostafa, A. (2020). Concrete Columns Confined with Large Rupture Strain Composites: An Emerging Field. In ACMSM25 Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials Vol. 37 (pp. 277-285). Singapore: Springer. DOI Scopus5 WoS4 |
| 2020 | Wang, Z., Wang, D., & Smith, S. (2020). Size effect of square concrete columns confined with CFRP wraps. In APFIS 2012 - 3rd Asia-Pacific Conference on FRP in Structures. |
| 2019 | Kanitkar, R., Del Rey Castillo, E., Smith, S. T., & Rasheed, H. (2019). Quality control and assurance for FRP anchors - Current practice and path forward. In Proceedings of the 7th Asia-Pacific Conference on FRP in Structures (APFIS 2019) (pp. 1-5). Gold Coast, Australia: IIFC. Scopus3 |
| 2019 | Mostafa, A., Shankar, K., & Smith, S. (2019). Numerical modeling of progressive damage of composite laminates. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. |
| 2019 | Smith, S., Yu, T., Fernando, D., & Wang, Z. (2019). Preface. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures (pp. III-IV). |
| 2019 | Tang, Z., Lim, Y., Smith, S., & Sirach, N. (2019). Monitoring the curing process of structural adhesives using the electromechanical impedance technique: A numerical investigation. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Scopus1 |
| 2019 | Tang, Z. S., Lim, Y. Y., Smith, S. T., & Sirach, N. (2019). Monitoring the strength gain of structural adhesives using the electromechanical impedance technique: An experimental investigation. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Surfers Paradise, Australia. |
| 2019 | Sirach, N., Smith, S. T., Yu, T., Mostafa, A., & Tang, Z. S. (2019). Experimental study on the confinement of high-strength concrete columns with large rupture strain FRP composites. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Gold Coast, Australia. |
| 2019 | Sirach, N., Smith, S. T., Yu, T., Mostafa, A., & Tang, Z. S. (2019). Confinement of concrete columns with large rupture strain FRP composites. In Proceedings of the 7th Asia-Pacific Conference on FRP in Structures (APFIS 2019). Gold Coast, Australia: IIFC. |
| 2019 | Del Rey Castillo, E., Kanitkar, R., & Smith, S. T. (2019). Case studies of using FRP anchors in New Zealand. In Proceedings of the 7th Asia-Pacific Conference on FRP in Structures (APFIS 2019) (pp. 1-5). Gold Coast, Australia: IIFC. Scopus3 |
| 2019 | Mostafa, A., Shankar, K., & Smith, S. T. (2019). Numerical determination of ballistic limit velocity of stainless steel woven wire mesh. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. Gold Coast, Australia. |
| 2019 | Smith, S., Yu, T., Fernando, D., & Wang, Z. (2019). Forward. In APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures (pp. 2). |
| 2018 | Gravina, R., Li, J., Aydin, H., Setunge, S., Visintin, P., Smith, S., & Al-Mahaidi, R. (2018). Bond Performance of FRP-Strengthened Reinforced Concrete In Aggressive Environmental Conditions. In N. Powers, D. Frangopol, R. AlMahaidi, & C. Caprani (Eds.), MAINTENANCE, SAFETY, RISK, MANAGEMENT AND LIFE-CYCLE PERFORMANCE OF BRIDGES (pp. 294-301). UK: CRC Press-Taylor & Francis Group. |
| 2017 | Kalfat, R., Gadd, J., Al-Mahaidi, R., & Smith, S. (2017). Evaluation and classification of anchorage systems used to enhance the flexural performance of FRP strengthened concrete members. In American Concrete Institute, ACI Special Publication Vol. 2017-October (pp. 559-568). Online: American Concrete Institute. Scopus1 |
| 2017 | Del Rey Castillo, E., Ingham, J. M., Smith, S. T., Kanitkar, R., & Griffith, M. C. (2017). A design approach for FRP anchors in FRP-strengthened RC structures. In Proceedings of the the 13th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structure (FRPRCS-13), as published in American Concrete Institute, ACI Special Publication Vol. 327 (pp. 343-359). Online: American Concrete Institute. Scopus5 |
| 2017 | Lim, Y., Smith, S., & Izadgoshasb, I. (2017). Smart-based monitoring of epoxy using piezoelectric transducers. In SHMII 2017 - 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Proceedings (pp. 1151-1159). online: International Society for Structural Health Monitoring of Intelligent Infrastrucure. Scopus4 |
| 2017 | Lim, Y., Izadgoshasb, I., & Smith, S. (2017). Monitoring of corrosion process in structural adhesive using smart materials. In SHMII 2017 - 8th International Conference on Structural Health Monitoring of Intelligent Infrastructure, Proceedings (pp. 1186-1194). online: International Society for Structural Health Monitoring of Intelligent Infrastrucure. Scopus2 |
| 2017 | Smith, S., Rasheed, H., & Kim, S. (2017). Moment-curvature based modelling of FRPstrengthened RC members anchored with FRP anchors. In Abstracts of the 6th Asia-Pacific Conference on FRP in Structures (APFIS 2017) (pp. 1-5). online: IIFC. Scopus2 |
| 2016 | Kanitkar, R., Smith, S., & Lewis, C. (2016). An experimental investigation on the splay portion of embedded FRP tension anchors. In Proceedings of the 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, CICE 2016 (pp. 413-418). Online: Department of Civil and Environmental Engineering and Research Institute for Sustainable Urban Development, The Hong Kong Polytechnic University. Scopus13 |
| 2014 | Wan, J., Smith, S., & Zhang, H. (2014). Experimental trends of FRP-to-timber joint tests. In Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014 (pp. 146). Canada: International Institute for FRP in Construction (IIFC). |
| 2014 | Zhang, H., Smith, S., & Wang, Z. (2014). Strategic positioning of FRP anchors in frpstrengthened slabs. In Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014 (pp. 145). Canada: International Institute for FRP in Construction (IIFC). |
| 2014 | Smith, S., & Zhang, H. (2014). Numerical modelling of FRP-concrete bonded interfaces anchored with FRP anchors. In American Concrete Institute, ACI Special Publication Vol. 2014-April (pp. 251-264). Online: American Concrete Institute. |
| 2013 | Wang, D. Y., Wang, Z. Y., Li, H., & Smith, S. T. (2013). Shaking table test of large scale nonductile RC frames retrofitted with FRP composites. In Proceedings of the 4th Asia-Pacific Conference on FRP in Structures, APFIS 2013. Scopus4 |
| 2013 | Zhang, H. W., & Smith, S. T. (2013). Experimental trends of FRP-to-concrete joints anchored with FRP anchors. In From Materials to Structures: Advancement Through Innovation - Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials, ACMSM 2012 (pp. 161-166). |
| 2012 | Wang, Z., Wang, D., Pan, X., & Smith, S. T. (2012). Analytical evaluation of seismic performance of non ductile RC frames retrofitted using CFRP composites. In Proceedings of the 6th International Conference on FRP Composites in Civil Engineering, CICE 2012. |
| 2012 | Wang, Z., Wang, D., Pan, X., & Smith, S. T. (2012). Analytical evaluation of seismic performance of non-ductile RC frames retrofitted using CFRP composites. In Proceedings of the 6th International Conference on FRP Composites in Civil Engineering, CICE 2012. |
| 2012 | Wang, K., Young, B., & Smith, S. T. (2012). Ultimate strength equation for pultruded CFRP plates in fire. In Proceedings of the 6th International Conference on FRP Composites in Civil Engineering, CICE 2012. Scopus1 |
| 2012 | Li, H., Zhou, X., Chen, C., Huang, Y., Bao, L., Bao, T., . . . Geem, Z. W. (2012). Preface. In Applied Mechanics and Materials Vol. 174-177. |
| 2012 | Yang, J. Q., Smith, S. T., & Feng, P. (2012). FRP-to-metal bonds: Effect of test specimen configuration on interfacial stresses. In Apfis 2012 3rd Asia Pacific Conference on Frp in Structures. |
| 2012 | Wang, Z., Wang, D., & Smith, S. T. (2012). Size effect of square concrete columns confined with CFRP wraps. In Apfis 2012 3rd Asia Pacific Conference on Frp in Structures. Scopus14 |
| 2011 | Smith, S. T., Hu, S., Kim, S. J., & Seracino, R. (2011). Strength and deflection enhancement of RC slabs with anchored FRP strengthening. In American Concrete Institute ACI Special Publication Vol. 2 (pp. 1207-1220). Scopus3 |
| 2011 | Zhang, H. W., & Smith, S. T. (2011). FRP-to-concrete joint assemblies anchored with multiple FRP anchors: Experimental investigation. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering, CICE 2010 (pp. 553-556). Beijing, PEOPLES R CHINA: SPRINGER-VERLAG BERLIN. DOI Scopus4 WoS2 |
| 2011 | Wan, J., Smith, S. T., & Qiao, P. Z. (2011). FRP-To-softwood joints: Experimental investigation. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in Frp Composites in Civil Engineering Proceedings of the 5th International Conference on Frp Composites in Civil Engineering Cice 2010 (pp. 951-954). Beijing, PEOPLES R CHINA: SPRINGER-VERLAG BERLIN. DOI Scopus14 WoS9 |
| 2011 | Kim, S. J., Smith, S. T., & Young, B. (2011). Effect of surface preparation on the strength of FRP-To-mild steel and FRP-To-stainless steel joints. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in Frp Composites in Civil Engineering Proceedings of the 5th International Conference on Frp Composites in Civil Engineering Cice 2010 (pp. 869-872). PEOPLES R CHINA, Beijing: SPRINGER-VERLAG BERLIN. DOI Scopus17 WoS12 |
| 2011 | Zhang, H., & Smith, S. T. (2011). Influence of anchor embedment angle on the strength and behaviour of FRP-to-concrete joints anchored with FRP anchors. In Advanced Composites in Construction 2011, ACIC 2011 - Proceedings of the 5th International Conference (pp. 204-213). |
| 2011 | Yang, J. Q., & Smith, S. T. (2011). An experimental investigation on strengthening single-bolted timber joints with externally bonded CFRP composites. In Advanced Composites in Construction 2011, ACIC 2011 - Proceedings of the 5th International Conference (pp. 59-70). |
| 2011 | Yip, H. L., Au, F. T. K., & Smith, S. T. (2011). Serviceability performance of prestressed concrete buildings taking into account long-term behaviour and construction sequence. In L. H. Fai (Ed.), Procedia Engineering Vol. 14 (pp. 1384-1391). Hong Kong, PEOPLES R CHINA: ELSEVIER SCIENCE BV. DOI Scopus8 WoS7 |
| 2011 | Smith, S. T., & Kim, S. J. (2011). Towards calculating the load-deflection response of anchored FRP-strengthened RC slabs. In S. Fragomeni, S. Venkatesan, N. T. K. Lam, & S. Setunge (Eds.), Incorporating Sustainable Practice in Mechanics of Structures and Materials - Proceedings of the 21st Australian Conference on the Mechanics of Structures and Materials (pp. 463-468). Victoria Univ City Campus, Melbourne, AUSTRALIA: CRC PRESS-TAYLOR & FRANCIS GROUP. |
| 2011 | Yip, H. L., Au, F. T. K., & Smith, S. T. (2011). Accounting for steel relaxation in prestressed concrete by finite element packages. In S. Fragomeni, S. Venkatesan, N. T. K. Lam, & S. Setunge (Eds.), Incorporating Sustainable Practice in Mechanics of Structures and Materials - Proceedings of the 21st Australian Conference on the Mechanics of Structures and Materials (pp. 155-160). Victoria Univ City Campus, Melbourne, AUSTRALIA: CRC PRESS-TAYLOR & FRANCIS GROUP. Scopus1 WoS1 |
| 2011 | Smith, S. T. (2011). Strengthening of concrete, metallic and timber construction materials with FRP composites. In L. P. Ye, P. Feng, & Q. R. Yue (Eds.), Advances in Frp Composites in Civil Engineering Proceedings of the 5th International Conference on Frp Composites in Civil Engineering Cice 2010 (pp. 13-19). Beijing, PEOPLES R CHINA: SPRINGER-VERLAG BERLIN. DOI Scopus31 WoS17 |
| 2011 | Wang, K., Young, B., & Smith, S. T. (2011). An experimental study on the mechanical properties of pultruded CFRP plates at elevated temperatures. In Structures Congress 2011 - Proceedings of the 2011 Structures Congress (pp. 3110-3119). American Society of Civil Engineers. DOI Scopus2 |
| 2010 | Smith, S. T. (2010). THE TEACHING OF SUSTAINABLE DEVELOPMENT TO UNDERGRADUATE ENGINEERING STUDENTS AT THE UNIVERSITY OF HONG KONG. In J. G. Teng (Ed.), PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON SUSTAINABLE URBANIZATION (ICSU 2010) (pp. 1007-1012). Hong Kong, PEOPLES R CHINA: HONG KONG POLYTECHNIC UNIV, FAC CONSTRUCTION & ENVIRONMENT. |
| 2010 | Smith, S. T., & Kim, S. J. (2010). Testing of large concrete cylinders confined with FRP. In 3rd International fib Congress and Exhibition, Incorporating the PCI Annual Convention and Bridge Conference: Think Globally, Build Locally, Proceedings. |
| 2009 | Smith, S. T., & Kim, S. J. (2009). Calculation of deflection of FRP-strengthened RC slabs using a tri-linear moment-curvature relationship. In Advanced Composites in Construction 2009, ACIC 2009 - Proceedings of the 4th International Conference (pp. 239-249). Scopus1 |
| 2009 | Kim, S. J., & Smith, S. T. (2009). Behaviour of handmade FRP anchors under tensile load in uncracked concrete. In Advances in Structural Engineering Vol. 12 (pp. 845-865). SAGE PUBLICATIONS INC. DOI Scopus66 WoS51 |
| 2009 | Mohamed, I., Seracino, R., & Smith, S. T. (2009). Analysis of FRP-to-concrete joint assemblies with FRP spike anchors using the applied element method. In APFIS 2009 - Asia-Pacific Conference on FRP in Structures (pp. 223-228). Scopus1 |
| 2009 | Kim, S. J., & Smith, S. T. (2009). Strengthening of RC slabs with large penetrations using anchored FRP composites. In APFIS 2009 - Asia-Pacific Conference on FRP in Structures (pp. 111-116). Scopus8 |
| 2009 | Smith, S. T. (2009). FRP anchors: Recent advances in research and understanding. In Apfis 2009 Asia Pacific Conference on Frp in Structures (pp. 35-44). Scopus23 |
| 2008 | Smith, S. T., & Kim, S. J. (2008). Behaviour of handmade FRP spike anchors. In Futures in Mechanics of Structures and Materials - Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, ACMSM20 (pp. 39-45). |
| 2008 | Shrestha, R., Samali, B., & Smith, S. T. (2008). Effectiveness of repairing damaged RC beam-column connections with FRP strips. In Futures in Mechanics of Structures and Materials - Proceedings of the 20th Australasian Conference on the Mechanics of Structures and Materials, ACMSM20 (pp. 395-403). |
| 2008 | Seliem, H. M., Sumner, E. A., Seracino, R., & Smith, S. T. (2008). Field testing of RC slabs with openings strengthened with CFRP. In Proceedings of the 4th International Conference on FRP Composites in Civil Engineering, CICE 2008. Scopus12 |
| 2008 | Shrestha, R., Smith, S. T., & Samali, B. (2008). Effectiveness of strengthening RC beam-column connections in shear with vertical FRP strips. In Proceedings of the 4th International Conference on FRP Composites in Civil Engineering, CICE 2008. |
| 2007 | Lau, K. T., Smith, S. T., Tam, H. Y., & Ho, S. L. (2007). Smart composites for civil infrastructure applications. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 2 (pp. 579-586). |
| 2007 | Kim, S. J., & Smith, S. T. (2007). Pull-out tests on FRP anchors. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 2 (pp. 775-782). Scopus6 |
| 2007 | Loo, M. K. Y., Foster, S. J., & Smith, S. T. (2007). Bond stress versus slip model for CFRP plates bonded to concrete. In Proceedings of the 1st Asia-Pacific Conference on FRP in Structures, APFIS 2007 Vol. 2 (pp. 709-716). Scopus3 |
| 2007 | Shrestha, R., & Smith, S. T. (2007). An experimental investigation on the strengthening of RC beamcolumn connections with FRP composites. In Proceedings of the 1st Asia Pacific Conference on Frp in Structures Apfis 2007 Vol. 1 (pp. 213-220). Scopus6 |
| 2007 | Smith, S. T. (2007). Preface. In Proceedings of the 1st Asia Pacific Conference on Frp in Structures Apfis 2007 Vol. 1 (pp. III-IV). |
| 2007 | Loo, M. K. Y., Foster, S. J., & Smith, S. T. (2007). Fatigue behaviour of CFRP-repaired corroded RC beams. In Progress in Mechanics of Structures and Materials - Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials, ACMSM19 (pp. 687-692). |
| 2006 | Gilbert, R. I., & Smith, S. T. (2006). Strain localization and its impact on the ductility of reinforced concrete slabs containing welded wire reinforcement. In Advances in Structural Engineering Vol. 9 (pp. 117-127). Perth, AUSTRALIA: MULTI SCIENCE PUBL CO LTD. DOI Scopus29 WoS22 |
| 2005 | Smith, S. T., & Gravina, R. J. (2005). Critical debonding length in FRP flexurally strengthened RC members. In J. F. Chen, & J. G. Teng (Eds.), Bond Behaviour of FRP in Structures: Proceedings of the International Symposium BBFS 2005 (pp. 277-282). Hong Kong, PEOPLES R CHINA: IIFC SECRETARIAT. WoS1 |
| 2005 | Li, J., Samali, B., & Smith, S. T. (2005). Stiffness estimation and damage detection of fibre reinforced polymer strengthened reinforced concrete beams using a vibration-based method. In 4th Australasian Congress on Applied Mechanics, ACAM 2005 (pp. 663-669). Scopus1 |
| 2003 | Zou, P. X. W., & Smith, S. T. (2003). Time-dependent flexural crack width prediction of concrete beams prestressed with CFRP tendons. In K. H. Tan (Ed.), FIBRE-REINFORCEMENT POLYMER: REINFORCEMENT FOR CONCRETE STRUCTURES, VOLS 1 AND 2, PROCEEDINGS (pp. 1023-1034). SINGAPORE, SINGAPORE: WORLD SCIENTIFIC PUBL CO PTE LTD. WoS1 |
| 2003 | Smith, S. T., Teng, J. G., & Lu, M. (2003). Neural network prediction of plate end debonding in FRP-plated RC beams. In K. H. Tan (Ed.), FIBRE-REINFORCEMENT POLYMER: REINFORCEMENT FOR CONCRETE STRUCTURES, VOLS 1 AND 2, PROCEEDINGS (pp. 193-204). SINGAPORE, SINGAPORE: WORLD SCIENTIFIC PUBL CO PTE LTD. |
| 2001 | Teng, J. G., Chen, J. F., & Smith, S. T. (2001). Debonding failures in FRP-strengthened RC beams: Failure modes, existing research and future challenges. In Composites in Construction A Reality (pp. 139-148). American Society of Civil Engineers. DOI Scopus12 |
| 2001 | Yuan, X. F., Lam, L., Teng, J. G., & Smith, S. T. (2001). FRP-confined RC columns under combined bending and compression: A comparative study of concrete stress-strain models. In J. G. Teng (Ed.), FRP COMPOSITES IN CIVIL ENGINEERING, VOLS I AND II, PROCEEDINGS (pp. 749-758). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV. WoS6 |
| 2001 | Smith, S. T., & Teng, J. G. (2001). Debonding failures in FRP-plated RC beams with or without U strip end anchorage. In J. G. Teng (Ed.), FRP COMPOSITES IN CIVIL ENGINEERING, VOLS I AND II, PROCEEDINGS (pp. 607-615). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV. WoS6 |
| 2001 | Teng, J. G., Smith, S. T., Yao, J., & Chen, J. F. (2001). Strength model for intermediate flexural crack induced debonding in RC beams and slabs. In J. G. Teng (Ed.), FRP COMPOSITES IN CIVIL ENGINEERING, VOLS I AND II, PROCEEDINGS (pp. 579-587). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV. WoS6 |
| 1999 | Smith, S. T., Bradford, M. A., & Oehlers, D. J. (1999). Post-buckling of unilaterally constrained mild steel plates. In S. L. Chan, & J. G. Teng (Eds.), ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2 (pp. 571-578). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV. |
| 1999 | Teng, J. G., Smith, S. T., & Ngok, L. Y. (1999). Local buckling of thin-walled polygonal columns subjected to axial compression or bending. In S. L. Chan, & J. G. Teng (Eds.), ADVANCES IN STEEL STRUCTURES, VOLS 1 AND 2 (pp. 109-115). HONG KONG, PEOPLES R CHINA: ELSEVIER SCIENCE BV. WoS9 |
| 1999 | Smith, S. T., Bradford, M. A., & Oehlers, D. J. (1999). Buckling of unilaterally constrained mild steel plates at elevated temperatures. In M. A. Bradford, R. Q. Bridge, & S. J. Foster (Eds.), MECHANICS OF STRUCTURES AND MATERIALS (pp. 443-+). AUSTRALIA, SYDNEY: A A BALKEMA PUBLISHERS. |
| Year | Citation |
|---|---|
| 2019 | Smith, S., Yu, T., Fernando, D., & Wang, Z. (2019). Preface. Poster session presented at the meeting of APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures. |
| 2019 | Smith, S. T., Yu, T., Fernando, D., & Wang, Z. (2019). Preface. Poster session presented at the meeting of Apfis 2019 Proceedings 7th Asia Pacific Conference on Frp in Structures. |
| Year | Citation |
|---|---|
| - | Farries, K., Visintin, P., & Smith, S. (n.d.). Dataset - Direct Laser Sintering of Lunar Regolith Simulants. DOI |
| Year | Citation |
|---|---|
| - | Farries, K., Visintin, P., & Smith, S. (n.d.). Images - Direct laser sintering of lunar regolith simulants. DOI |
External Competitive Grants: 2013-present (based in Australia)
Smith, S.T., Sheikh, A., Gravina, R. and Griffith, M.C., "Multifunctional Structural Panels for Next-Generation Infrastructure", ARC Discovery (DP220103665), 2022-2024, AUD 308,000
Tao, Z. (Western Sydney University) et al. (Smith, S.T. CI), "National Facility for Physical Fire Simulation", ARC Linkage, Infrastructure and Facilities (LIEF) (LE220100030), 2022, AUD 1,213,351
Setunge, S. (Hub Director, RMIT) et al. (Smith, S.T. CI), "ARC Research Hub for Transformation of Reclaimed Waste Resources to Engineered Materials and Solutions for a Circular Economy", ARC Industrial Transformation Research Hub (ITRH) (IH200100010), 2021-2025, AUD 5,000,000
Wu, Y.F. and Smith, S.T., "Structural Fuses for Safer and More Economical Bridge Construction", ARC Discovery (DP200100631), 2020-2022, AUD 390,000
Yu, T., Teh, L., Smith, S.T. and Teng, J.G., "Hybrid Multiple-Tube Concrete Columns Incorporating Composite Materials", ARC Discovery (DP170102992), 2017-2019, AUD 280,000
Gravina, R., Setunge, S., Al-Mahaidi, R., Smith, S.T., Koay, Y.C., Taylor, S. and Pritchard, R., "Durability of Debonding Resistance of Composite Materials based Strengthening Techniques for Deteriorated Structures", ARC Linkage (LP130100482), 2014-2018, AUD 210,000
External Competitive Grants 2007-2013 (when I was based in Hong Kong)
Smith, S.T. and Oehlers, D.J., “Rational Modelling and Design of Externally Bonded Strengthening Systems for Civil Infrastructure Incorporating Anchorage Devices”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 715712E), 2013-2015, HKD 700,000
Wu, Y.F., Bank, L., Smith, S.T. and Teng, J.G., “Characterization of a mechanically enhanced FRP bonding system”, General Research Fund (GRF), HK Research Grants Council (RGC) (123711), 2012-2014, HKD 807,842
Teng, J.G., Smith, S.T., Wu, Y.F., Dai, J.G. and Yu, T Development of a Design Guideline for the Strengthening of Concrete Structures using FRP Composites, ITF Tier 3, Tier 3 of the Innovation and Technology Fund (ITF) of the Innovation and Technology Commission (ITC), Hong Kong (Includes HKD180K industry sponsorship) (ITS/084/08), 2009-2010, HKD 1,130,130
Smith, S.T. and R. Seracino, “Strengthening of Reinforced Concrete Slabs with Large Penetrations using Fibre-Reinforced Polymer (FRP) Composites”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 716308E), 2009-2011, HKD 572,596
Su, R.K.L and Smith, S.T., “A Generic Displacement-Based Approach for the Design of Plated Concrete Beams with Bolt Connections”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 716608E), 2009-2010, HKD 585,109
Smith, S.T., “Prevention of Debonding Failures in Externally Bonded Fibre Reinforced Polymer (FRP) Composite Strengthening Systems using FRP Anchors”, General Research Fund (GRF), HK Research Grants Council (RGC) (HKU 715907E), 2008-2011, HKD 562,992
External Competitive Grants: 2004-2006 (when I was based in Australia)
Smith, S.T., “Retrofit of Reinforced Concrete Beam-Column Connections with Fibre Reinforced Polymer (FRP) Composites”, ARC Discovery (DP0559567), 2005-2007, AUD 283,000
Foster, S.J. and Smith, S.T., “Debonding Failure in CFRP Strengthened Concrete Structures”, ARC Discovery (DP0453096), 2004-2006, AUD 150,000
Aravinthan, T. et al (Smith, S.T. UTS node leader), “Research Network for Rehabilitation of Structures Using Advanced Materials and Frontier Technologies”, ARC Special (SR0354805), 2004, AUD 10,000
Course Level
I have had a range of experiences in course design, implementation and accreditation.
- Bachelor of Engineering (Honours) in Civil Engineering: commenced 2013 (led the successful Engineers Australia provisional accreditation for the Environmental Engineering Major in 2016 and the full accreditation for civil engineering in 2018) (Southern Cross University, Australia)
- Bachelor of Engineering (Honours) in Mechanical Engineering: commenced 2016 (led the course design, and the successful Engineers Australia provisional accreditation in 2016) (Southern Cross University, Australia)
- Bachelor of Engineering (Honours) in Coastal Systems Engineering: commenced 2018 (led the successful Engineers Australia provisional accreditation in 2018) (Southern Cross University, Australia)
- Master of Engineering Management (MEM) (Online) + Graduate Certificate in Engineering Management (Online): commenced 2015 (led the course design, and course implementation with the online provider) (Southern Cross University, Australia)
- Master of Engineering Management/Master of Business Administration (MEM/MBA): commenced 2017 (supervised the course design) (Southern Cross University, Australia)
Subject Level
I have developed, coordinated and delivered a variety of undergraduate and postgraduate subjects over the years. Examples include (UG=Undergraduate, PG=Postgraduate):
- Sustainable Development of the Built Environment (UG)
- Engineering for Sustainable Development (UG)
- Physics and Materials (UG)
- Engineering Mechanics and Materials (UG)
- Applied Mechanics (UG)
- Analysis and Computer Modelling of Structures (UG)
- Structural Analysis (UG)
- Structural Design (UG)
- Theory and Design of Structures (UG)
- Research Ethics for Graduate Students (PG)
- FRP Composites for Civil Engineering Applications (PG)
Supervised student prizes:
- The Architectural Engineering Group Ingenuity Presentation Prize (2020) to Bahia Al Balushi, Alex Leuenberger, Margot Holbert, Sophie Wilkinson for the project The Conceptual Design for a Lunar Habitat, Informed by Both Practical Constraints and Human Wellbeing. (The University of Adelaide, Australia)
- SCU Engineering Thesis Showcase Prize (2018) to Mr Shannon Eduards for thesis Tensile Strength Properties of two Australian Grown Solid Bamboo Species: Bambusa Polymorpha and Bambusa Tulda. (Southern Cross University, Australia)
- Inaugural SCU Engineering Thesis Showcase Prize (2016) to Mr Dale Lindley for thesis Mechanical Properties of Australian Grown Bamboo. (Southern Cross University, Australia)
- Best Paper Award in Structural and Mechanics Discipline (2011), Institution of Civil Engineers (ICE) Hong Kong Graduates and Students Papers Competition to Ms Jennyfer Tse for thesis Teaching Structural Engineering Sense. (The University of Hong Kong, China)
- Two Dean’s Prize Winners and Best Poster Prize Winner at UTS for final year undergraduate projects in 2004 (Semester 1) and 2006 (Semester 2). (University of Technology Sydney, Australia)
| Date | Role | Research Topic | Program | Degree Type | Student Load | Student Name |
|---|---|---|---|---|---|---|
| 2025 | Principal Supervisor | Development of Modular Structural Panel Systems utilising Lunar In-situ Resources | Doctor of Philosophy | Doctorate | Full Time | Mr Chamil Dilshan Dhanasekara Induruwe Gamaethige |
| 2025 | Principal Supervisor | Lunar Habitat Structures using Lunar Construction Material: A Study on Structural, Thermal, and Radiation Shielding Performance | Doctor of Philosophy | Doctorate | Full Time | Mr Sajedur Rahman |
| 2023 | Principal Supervisor | Geopolymer-based construction materials for lunar structures utilising in-situ lunar resources | Doctor of Philosophy | Doctorate | Full Time | Mr Rayhan Md Faysal |
| 2023 | Principal Supervisor | Development of a sustainable large span hybrid FRP-steel flat panel system | Doctor of Philosophy | Doctorate | Full Time | Miss Therese Succar |
| 2022 | Co-Supervisor | Structural Logistics of Repair in Lunar Habitat Design using Sintered Regolith Blocks | Doctor of Philosophy | Doctorate | Full Time | Miss Monika Stankiewicz |
| 2022 | Principal Supervisor | Sustainable Off-Earth Construction Materials and Structural Systems Utilising In-Situ Lunar Materials | Doctor of Philosophy | Doctorate | Full Time | Mr Mohammad Altaf Hossain |
| 2022 | Principal Supervisor | Hypervelocity Impact Resistant Structural Composite Panel Systems for Off-Earth Construction | Doctor of Philosophy | Doctorate | Full Time | Mr Md Abdur Rakib |
| 2020 | Co-Supervisor | Sintering and laser-processing of lunar regolith for the manufacture of lunar-base building materials | Doctor of Philosophy | Doctorate | Part Time | Mr Kevin Farries |
| 2020 | Principal Supervisor | Lunar Base Design and Construction | Doctor of Philosophy | Doctorate | Part Time | Mr John Culton |
| Date | Role | Research Topic | Program | Degree Type | Student Load | Student Name |
|---|---|---|---|---|---|---|
| 2024 - 2024 | Co-Supervisor | Experimental Investigation of Strength Improvement of Fractured Rocks by Polyurethane Resin Grouting |
Master of Philosophy | Master | Full Time | Mr Luong Tuan Anh Doan |
| 2022 - 2025 | Co-Supervisor | Development of Structural Assessment Methodology and Design Criteria for Lunar Dome Structures under Moonquake-Induced Seismic Loading and Reduced Gravity | Doctor of Philosophy | Doctorate | Full Time | Mr Seungil Lee |
| 2021 - 2025 | Co-Supervisor | Damage detection in FRP-strengthened concrete structures utilising nonlinear guided waves | Doctor of Philosophy | Doctorate | Full Time | Mr Yuqiao Cao |
| 2020 - 2025 | Principal Supervisor | Concrete Columns Lightly-Confined with Sustainable Hybrid Fibre-Reinforced Polymer Jackets | Doctor of Philosophy | Doctorate | Part Time | Mr Xin Wang |
| Date | Role | Committee | Institution | Country |
|---|---|---|---|---|
| 2021 - ongoing | Founder | Australian Society for Off-Earth Construction (ASOC) | The University of Adelaide | Australia |
| 2019 - ongoing | Chair | Associate Deans International (ADI) Network | Australian Council of Engineering Deans | Australia |
| 2018 - 2023 | President | International Institute for FRP in Construction | IIFC | Hong Kong |
| 2013 - ongoing | Board Member | Australian Council of Engineering Deans | ACED | Australia |
| 2013 - 2019 | Board Member | Australasian Association for Engineering Education | AAEE | Australia |
| 2012 - 2013 | President | Hong Kong Chapter, Engineers Australia | EAHK | Hong Kong |
| Date | Title | Engagement Type | Institution | Country |
|---|---|---|---|---|
| 2019 - 2019 | Chair, Seventh Asia-Pacific Conference on FRP in Structures, APFIS 2019 , Surfers Paradise, Australia, 10-13 December 2019. | Scientific Community Engagement | APFIS 2019 | Australia |
| 2014 - 2014 | Chair, 23rd Australasian Conference on the Mechanics of Structures and Materials, ACMSM23, Byron Bay, 9-12 December 2014. | Scientific Community Engagement | ACMSM23 | Australia |
| 2013 - 2013 | Co-Chair, Fourth Asia-Pacific Conference on FRP in Structures, APFIS 2013, Melbourne, Australia, 11-13 December 2013. | Scientific Community Engagement | APFIS 2013 | Australia |
| 2007 - 2007 | Chair, First Asia-Pacific Conference on FRP in Structures, APFIS 2007, Hong Kong, 12-14 December 2007. | Scientific Community Engagement | APFIS 2007 | Hong Kong |
| Date | Role | Editorial Board Name | Institution | Country |
|---|---|---|---|---|
| 2016 - 2020 | Editor | Journal of Construction and Building Materials | Elsevier | United Kingdom |
| 2011 - 2017 | Associate Editor | Australian Journal of Civil Engineering | Taylor & Francis | United Kingdom |
| 2008 - 2021 | Board Member | Journal of Composites for Construction | ASCE | United States |
Connect With Me
External Profiles
