Animesh Basak

Dr Animesh Basak

Dualbeam Engineer

Research Infrastructure and Platforms

Division of Research and Innovation

  • Journals
    Year Citation
    2025 Kurdi, A., Almalki, D., Degnah, A., & Basak, A. K. (2025). Microstructure and Micro-Mechanical Properties of Thermally Sprayed HA-TiO2 Coating on Beta-Titanium Substrate. Materials, 18(3), 540.
    DOI
    2025 Shuvho, M. B. A., Juri, A. Z., Basak, A. K., Kotousov, A., & Yin, L. (2025). Micromechanical characteristics of titanium alloy (Ti-6Al-4V) made by laser powder bed fusion using an in-situ SEM micropillar compression technique. Journal of the Mechanical Behavior of Biomedical Materials, 161, 106794-1-106794-17.
    DOI Scopus3 WoS3 Europe PMC1
    2025 Ragunath, S., Radhika, N., Krishna, S. A., & Basak, A. K. (2025). Improving wear resistance of Ti6Al6V2Sn alloy by reinforcing AlBeSiTiV high-entropy alloy through microwave sintering. Tribology International, 203, 110415.
    DOI Scopus2 WoS2
    2025 Basak, A. K., Bajwa, D. S., & Pramanik, A. (2025). Fatigue Behaviour of Mechanical Joints: A Review. Metals, 15(1), 30 pages.
    DOI Scopus2 WoS2
    2025 Basak, A. K., Ghasseb, J., & Pramanik, A. (2025). Performance of Gears Manufactured Through Additive Manufacturing. Metals, 15(1), 63.
    DOI Scopus3 WoS2
    2025 Basak, A. K., Sali, J. M., & Pramanik, A. (2025). Mechanical Properties of 17-4 PH Stainless Steel Manufactured by Atomic Diffusion Additive Manufacturing. Designs, 9(3), 66.
    DOI
    2025 Kurdi, A., Almalki, D., Sarkar, S., Aldurihem, A., Degnah, A., & Basak, A. K. (2025). Effect of Si and HA on the Mechanical Characteristics of Spark-Plasma-Sintered Mg–Zn–Mn–(Si–HA) Composites. Coatings, 15(6), 655.
    DOI
    2025 Kurdi, A., Basak, A. K., Radhika, N., & Degnah, A. (2025). Microstructure and Mechanical Properties of AlCoCrFeNi High-Entropy Alloy-Reinforced Ti-6Al-4V Composites. Materials, 18(13), 3179.
    DOI Scopus1 WoS1
    2025 Davaasambuu, K., Dong, Y., Pramanik, A., & Basak, A. K. (2025). Mechanisms and Performance of Composite Joints Through Adhesive and Interlocking Means—A Review. Journal of Composites Science, 9(7), 28 pages.
    DOI Scopus2 WoS2
    2025 Arumugam, A., Basak, A. K., Pramanik, A., & Littlefair, G. (2025). Tool Geometries and Design of Friction Stir Spot Welding (FSSW) Tools and Effect on Weld Properties—A Comprehensive Review. Materials, 18(14), 26 pages.
    DOI
    2025 Arumugam, A., Pagwiwoko, C. P., Pramanik, A., & Basak, A. K. (2025). An Experimental and Simulation Study on the Effect of Adhesive in Weld Bonded Spot Weld Joints. Metals, 15(9), 21 pages.
    DOI
    2025 Nithyaprakash, R., Shankar, S., Naveenkumar, R., Anand, R. G., Vasanth, S., Prakash, C., . . . Basak, A. K. (2025). Long-term steady state friction and wear rate estimation of ZTA against AZ31 alloy under different bio-lubricants for hip prosthesis – an in-vitro study. International Journal of Surface Science and Engineering, 19(3), 242-256.
    DOI
    2025 Nithyaprakash, R., Shankar, S., Naveenkumar, R., Abbas, G., Prakash, C., Pramanik, A., & Basak, A. K. (2025). IN SILICO APPROACH IN ESTIMATING WEAR AND FAILURE OF DUAL MOBILITY IMPLANTS WITH LARGE CUP AND LINER THICKNESS UNDER DIFFERENT CUP INCLINATION ANGLES FOR ROUTINE GAIT ACTIVITIES. Journal of Mechanics in Medicine and Biology, 17 pages.
    DOI
    2025 Davaasambuu, K., Basak, A. K., Dong, Y., & Pramanik, A. (2025). Bio-Inspired Novel Joints with Superior Mechanical Performance. Journal of Composites Science, 9(9), 19 pages.
    DOI
    2025 Rameshkumar, S., Radhika, N., Ragunath, S., & Basak, A. K. (2025). Mechanical property evaluation and wear optimization of LM13 MMC reinforced with AlTiVZrCrMo high entropy alloy. iScience, 28(5), 112356.
    DOI Scopus2 WoS1
    2025 Basak, A. K., Lightbody, K., & Pramanik, A. (2025). The effect of material intrinsic properties on the quality of machined surface during laser beam cutting. Materials Chemistry and Physics, 336, 130546.
    DOI
    2025 Pramanik, A., Basak, A., Dong, Y., Prakash, C., & Davim, J. P. (2025). Preface. Nanocomposite Manufacturing Technologies Fundamental Principles Mechanisms and Processing, xv-xviii.
    DOI
    2024 Rooney, K., Dong, Y., Basak, A. K., & Pramanik, A. (2024). Prediction of Mechanical Properties of 3D Printed Particle-Reinforced Resin Composites. Journal of Composites Science, 8(10), 40 pages.
    DOI Scopus14 WoS15
    2024 Pramanik, A., & Basak, A. K. (2024). Effects of Input Parameters on the Hole Quality During the Drilling of Al Metal Matrix Composites. Designs, 8(6), 111.
    DOI Scopus2
    2024 Subramaniam, S., Ganesan, A., Raju, N., Rajavel, N., Chenniappan, M., Prakash, C., . . . Basak, A. K. (2024). Assessment of pulmonary function and respiratory symptoms among INDIAN textile sizing mill workers. Work (Reading, Mass.), 79(2), 765-774.
    DOI
    2024 Nithyaprakash, R., Shankar, S., Naveenkumar, R., Raja, A. J. K., Anand, R. G., Abbas, G., . . . Basak, A. K. (2024). Effect of Elevated Acetabular Cup on Contact and Failure Analysis in Hip Implants for Different Microseparations and Cup Inclinations Under Routine Gait Activities Using In Silico Approach. Indian Journal of Orthopaedics, 58(6), 705-715.
    DOI Scopus1 WoS1
    2024 Basak, A. K., Radhika, N., Prakash, C., & Pramanik, A. (2024). Investigation on the Microstructure and Micro-Mechanical Properties of Thermal-Sprayed NiCoCrAlY High Entropy Alloy Coating. Designs, 8(2), 37.
    DOI Scopus7
    2024 Nithyaprakash, R., Shankar, S., Naveenkumar, R., Abbas, G., Prakash, C., Pramanik, A., & Basak, A. K. (2024). Effect of microseparation and corner radius on contact mechanics and failure of dual mobility implants under regular and physically demanding gait loads. International Journal on Interactive Design and Manufacturing, 18(8), 5547-5560.
    DOI
    2024 Subramaniam, S., Ganesan, A., Raju, N., Rajavel, N., Chenniappan, M., Mohanty, R. M. S., . . . Basak, A. K. (2024). Study of Respiratory Symptoms and Pulmonary Function among Neem Oil Industry Workers. Indian Journal of Occupational and Environmental Medicine, 28(2), 163-169.
    DOI Scopus1 WoS1
    2024 Basak, A. K., Pramanik, A., Chen, Y. X., Prakash, C., Radhika, N., & Shankar, S. (2024). Bound metal deposition of stainless steel 316L: Effect of process variables on microstructural and mechanical behaviors. Materialia, 36, 102196.
    DOI Scopus6 WoS4
    2024 Basak, A. K., Kurdi, A., Radhika, N., Arputharaj, J., Prakash, C., Pramanik, A., & Shankar, S. (2024). Compressive mechanical properties of thermal sprayed AlCoCrFeNi high entropy alloy coating. Journal of Alloys and Compounds, 1003, 175721.
    DOI Scopus18 WoS19
    2024 Subramaniam, S., Ganesan, A., Raju, N., Rajavel, N., Chenniappan, M., Prakash, C., . . . Basak, A. K. (2024). Investigation of Noise Induced Hearing Loss Among Power Loom Industry Workers in Tamil Nadu, India. INDIAN JOURNAL OF OTOLARYNGOLOGY AND HEAD & NECK SURGERY, 76(6), 5531-5541.
    DOI Scopus1 WoS1 Europe PMC1
    2024 Alsolami, A., Zaman, A., Alshabouna, F., Kurdi, A., Degnah, A., Alfihed, S., . . . Basak, A. K. (2024). Effect of Processing Route on Microstructure and Mechanical Properties of an Al-12Si Alloy. Materials, 17(19), 4780.
    DOI
    2024 Srivatsav, V. R., Radhika, N., Ragunath, S., Niketh, M. S., & Basak, A. K. (2024). Microstructural characterization and wear analysis of AlTiVZrMoCr HEA coating on SS410 steel by atmospheric plasma spraying. Journal of Alloys and Compounds, 1008, 176806.
    DOI Scopus9 WoS9
    2024 Kurdi, A., Degnah, A., Tabbakh, T., Alnaser, H., & Basak, A. K. (2024). Micro-Scale Deformation Aspects of Additively Fabricated Stainless Steel 316L under Compression. Materials, 17(2), 439.
    DOI Scopus5 WoS5 Europe PMC1
    2024 Noble, N., Radhika, N., Sathishkumar, M., & Basak, A. K. (2024). Slurry erosion behaviour of AlCoCrFeNi high entropy alloy coating prepared by atmospheric plasma spraying. Transactions of the Institute of Metal Finishing, 102(3), 161-168.
    DOI Scopus9 WoS9
    2024 King, S. A., Cook, N. J., Ciobanu, C. L., Ehrig, K., Campo Rodriguez, Y. T., Basak, A., & Gilbert, S. (2024). Coupled Microstructural EBSD and LA-ICP-MS Trace Element Mapping of Pyrite Constrains the Deformation History of Breccia-Hosted IOCG Ore Systems. Minerals, 14(2), 1-28.
    DOI Scopus5 WoS5
    2024 Radhika, N., Krishna, S. A., Basak, A. K., & Adediran, A. A. (2024). Microstructure and tribological behaviour of CoCrCuFeTi high entropy alloy reinforced SS304 through friction stir processing. Scientific Reports, 14(1), 3662.
    DOI Scopus22 WoS22 Europe PMC8
    2024 Subramaniam, S., Raju, N., Ganesan, A., Rajavel, N., Chenniappan, M., Stonier, A. A., . . . Basak, A. K. (2024). Impact of cotton dust, endotoxin exposure, and other occupational health risk due to indoor pollutants on textile industry workers in low and middleincome countries. Journal of Air Pollution and Health, 9(1), 75-96.
    Scopus5
    2024 Kurdi, A., Degnah, A., Juri, A. Z., Ghani, J. A., & Basak, A. K. (2024). Deformation behavior of the hybrid S-phase layer formed on a stainless-steel substrate by thermochemical heat treatment under mechanical loading. Materials Science and Engineering: A, 900, 146462.
    DOI Scopus3 WoS3
    2024 Ambrosio, G. D., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2024). Finite element analysis of deformation mechanism of SiC reinforced 6061 aluminium-based metal matrix composites under compression. International Journal on Interactive Design and Manufacturing, 18(8), 6237-6254.
    DOI Scopus1
    2023 Rajavel, N., Subramaniam, S., Raju, N., Ganesan, A., Subramanian, S., Jeyamurthi, N. P., . . . Uddin, M. S. (2023). Short-term tribological study of ceramic biomaterials against MgAZ31 under bio-lubricants for hip joint replacements. International Journal of Surface Science and Engineering, 17(4), 280-294.
    DOI Scopus1 WoS1
    2023 Basak, A., & Dey, R. K. (2023). The shape of the electron and muon lateral distribution functions of extensive air showers. European Physical Journal Plus, 138(11), 992-01-992-25.
    DOI WoS1
    2023 Behera, A., Saxena, K., Prakash, C., Pramanik, A., Haider, J., Basak, A., & Shankar, S. (2023). MODELING AND SIMULATION OF MAGNETRON-SPUTTERRED NiTi THIN FILM DEPOSITION BY SRIM/TRIM. SURFACE REVIEW AND LETTERS, 32(6), 19 pages.
    DOI Scopus1 WoS1
    2023 Pramanik, A., & Basak, A. K. (2023). Laser Beam Machining of Titanium Alloy—A Review. Metals, 13(9), 1-16.
    DOI Scopus12 WoS11
    2023 Kurdi, A., Tabbakh, T., & Basak, A. K. (2023). Microstructural and Nanoindentation Investigation on the Laser Powder Bed Fusion Stainless Steel 316L. Materials, 16(17), 1-19.
    DOI Scopus13 WoS13 Europe PMC3
    2023 Rooney, K., Dong, Y., Pramanik, A., & Basak, A. K. (2023). Additive Manufacturing in Australian Small to Medium Enterprises: Vat Polymerisation Techniques, Case Study and Pathways to Industry 4.0 Competitiveness. Journal of Manufacturing and Materials Processing, 7(5), 168.
    DOI Scopus8 WoS6
    2023 Juri, A. Z., Azmi, F., Basak, A. K., Ghani, J. A., Kasim, M. S., & Alias, R. (2023). Tribological and corrosion behaviour of medical grade 316LVM steel by low temperature hybrid gaseous nitriding and carburizing. Tribology International, 190, 109026.
    DOI Scopus7 WoS8
    2023 Prakash, C., Pramanik, A., & Basak, A. (2023). Guest editorial: Special issue “Computational and numerical modelling for product design and manufacturing”. International Journal on Interactive Design and Manufacturing, 17(5), 2073.
    DOI
    2023 Degnah, A., Tabbakh, T., Kurdi, A., & Basak, A. K. (2023). Role of precipitation and solute segregation on micro-scale deformation of additively manufactured Inconel 718. Materials Science and Engineering: A, 887, 145762.
    DOI Scopus18 WoS13
    2023 Basak, A., Lee, A., Pramanik, A., Neubauer, K., Prakash, C., & Shankar, S. (2023). Material extrusion additive manufacturing of 17–4 PH stainless steel: effect of process parameters on mechanical properties. Rapid Prototyping Journal, 29(5), 1097-1106.
    DOI Scopus20 WoS18
    2023 Alkahlan, B., Tabbakh, T., Kurdi, A., Pramanik, A., & Basak, A. K. (2023). Formation and Characterization of the Recast Layer Formed on Inconel 718 during Wire Electro Discharge Machining. Materials, 16(3), 930.
    DOI Scopus9 WoS7 Europe PMC2
    2023 Khanna, V., Kumar, V., Bansal, S. A., Prakash, C., Ubaidullah, M., Shaikh, S. F., . . . Shankar, S. (2023). Fabrication of efficient aluminium/graphene nanosheets (Al-GNP) composite by powder metallurgy for strength applications. Journal of Materials Research and Technology, 22, 3402-3412.
    DOI Scopus68 WoS37
    2023 Zheng Yang, K., Pramanik, A., Basak, A. K., Dong, Y., Prakash, C., Shankar, S., . . . Ivanovich Vatin, N. (2023). Application of coolants during tool-based machining – A review. Ain Shams Engineering Journal, 14(1), 101830.
    DOI Scopus107 WoS48
    2023 Kurdi, A., Aldoshan, A., Alshabouna, F., Alodadi, A., Degnah, A., Alnaser, H., . . . Basak, A. K. (2023). Investigation into the Microstructure and Hardness of Additively Manufactured (3D-Printed) Inconel 718 Alloy. Materials, 16(6), 14 pages.
    DOI Scopus13 WoS11 Europe PMC7
    2023 Ze, G. K., Pramanik, A., Basak, A. K., Prakash, C., Shankar, S., & Radhika, N. (2023). Challenges associated with drilling of carbon fiber reinforced polymer (CFRP) composites-A review. Composites Part C: Open Access, 11, 100356.
    DOI Scopus36 WoS28
    2023 Basak, A. K., Pramanik, A., Prakash, C., Shankar, S., & Sehgal, S. S. (2023). Microstructure and micro-mechanical properties of friction stir processed Al 5086-based surface composite. Materials Today Communications, 35, 8 pages.
    DOI Scopus19 WoS16
    2023 Harding, A., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2023). Application of additive manufacturing in the biomedical field- A review. Annals of 3D Printed Medicine, 10, 1-16.
    DOI Scopus29
    2023 Juri, A. Z., Basak, A. K., & Yin, L. (2023). Failure mechanisms in in-situ SEM micropillar compressions of pre-crystallized and crystallized zirconia-containing lithium silicate glass-ceramics. Ceramics International, 49(16), 27165-27175.
    DOI Scopus3 WoS3
    2023 Rowe, A., Pramanik, A., Basak, A. K., Prakash, C., Subramaniam, S., Dixit, A. R., & Radhika, N. (2023). Effects of Abrasive Waterjet Machining on the Quality of the Surface Generated on a Carbon Fibre Reinforced Polymer Composite. Machines, 11(7), 749.
    DOI Scopus16 WoS15
    2023 Basak, A. K., Pramanik, A., Prakash, C., Shankar, S., Gupta, L. R., Smirnov, V. A., & Al-Kahtani, A. A. (2023). Microstructural and micro-mechanical behaviours of friction stir processed magnesium alloy. Journal of Materials Research and Technology, 25, 6303-6312.
    DOI Scopus5 WoS4
    2023 Pramanik, A., Basak, A. K., Samarasinghe, M., Prakash, C., & Subramaniam, S. (2023). Effectiveness of coolant on sustainable drilling and hole quality of titanium alloy. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 239(4), 12 pages.
    DOI Scopus1 WoS1
    2023 Debnath, S., Anwar, M., Basak, A. K., & Pramanik, A. (2023). Use of palm olein as cutting fluid during turning of mild steel. Australian Journal of Mechanical Engineering, 21(1), 192-202.
    DOI Scopus7 WoS9
    2023 Shankar, S., Manikandan, M., Karupannasamy, D. K., Jagadeesh, C., Pramanik, A., & Basak, A. K. (2023). Investigations on the tribological behaviour, toxicity, and biodegradability of kapok oil bio-lubricant blended with (SAE20W40) mineral oil. Biomass Conversion and Biorefinery, 13(5), 3669-3681.
    DOI Scopus10 WoS14
    2022 Juri, A. Z., Basak, A. K., & Yin, L. (2022). In-situ SEM cyclic nanoindentation of pre-sintered and sintered zirconia materials.. Journal of the mechanical behavior of biomedical materials, 126, 1-12.
    DOI Scopus8 WoS7 Europe PMC1
    2022 Basak, A., Pramanik, A., Prakash, C., Shankar, S., & Debnath, S. (2022). Understanding the Micro-Mechanical Behaviour of Recast Layer Formed during WEDM of Titanium Alloy. Metals, 12(2), 16 pages.
    DOI Scopus23 WoS21
    2022 Shankar, S., Nithyaprakash, R., Abbas, G., Naveen Kumar, R., Pramanik, A., Kumar Basak, A., & Prakash, C. (2022). Tribological behavior of zirconia-toughened alumina (ZTA) against Ti6Al4V under different bio-lubricants in hip prosthesis using experimental and finite element concepts. Materials Letters, 307, 4 pages.
    DOI Scopus8 WoS7
    2022 Prakash, C., Singh, S., Basak, A., Królczyk, G., Pramanik, A., Lamberti, L., & Pruncu, C. I. (2022). Corrigendum to “processing of Ti50Nb50−xHAx composites by rapid microwave sintering technique for biomedical applications” [J Mater Res Technol 9 (1) (2020) 242–252](S2238785419312529)(10.1016/j.jmrt.2019.10.051). Journal of Materials Research and Technology, 18, 5455.
    DOI
    2022 Tabbakh, T., Alshihri, S., Basak, A. K., & Kurdi, A. (2022). Strength of a 3D Printed Al 7068 Alloy Under Micro-Pillar Compression. Metals and Materials International, 28(11), 13 pages.
    DOI Scopus18 WoS16
    2022 Nair, H., Pramanik, A., Basak, A. K., Prakash, C., Debnath, S., Shankar, S., & Dixit, A. R. (2022). Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238(3), 17 pages.
    DOI Scopus10 WoS10
    2022 Azmi, F., Basak, A. K., Adenan, M. S., Haruman, E., & Saedon, J. B. (2022). Responses of hybrid S phase layer to nanoscratching. Surface and Coatings Technology, 441, 11 pages.
    DOI Scopus7 WoS6
    2022 Pramanik, A., Basak, A. K., Prakash, C., Shankar, S., & Chattopadhyaya, S. (2022). Sustainability in drilling of aluminum alloy. Cleaner Materials, 3, 100048.
    DOI Scopus16 WoS17
    2022 Nguyen, H. D., Pramanik, A., Basak, A. K., Dong, Y., Prakash, C., Debnath, S., . . . Buddhi, D. (2022). A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties. Journal of Materials Research and Technology, 18, 4641-4661.
    DOI Scopus424 WoS328
    2022 Juri, A. Z., Basak, A. K., & Yin, L. (2022). In-situ SEM micropillar compression of porous and dense zirconia materials. Journal of the Mechanical Behavior of Biomedical Materials, 132, 1-11.
    DOI Scopus7 WoS6 Europe PMC2
    2022 Islam, M. R., Zubair, M. A., Galib, R. H., Hoque, M. S. B., Tomko, J. A., Aryana, K., . . . Hopkins, P. E. (2022). Vacancy-Induced Temperature-Dependent Thermal and Magnetic Properties of Holmium-Substituted Bismuth Ferrite Nanoparticle Compacts.. ACS Appl Mater Interfaces, 14(22), 25886-25897.
    DOI Scopus8 WoS7 Europe PMC1
    2022 Xiao, Z., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2022). Material recovery and recycling of waste tyres-A review. Cleaner Materials, 5, 16 pages.
    DOI Scopus104 WoS73
    2022 Subramaniam, S., Raju, N., Shanmugam, E., Rajavel, N., Pramanik, A., Basak, A. K., . . . Gur, A. K. (2022). Tribo-mechanical behaviour of aluminium alloy (AlSi10Mg) reinforced with palmyra shell ash and silicon carbide particles. Metallurgical Research and Technology, 119(3), 315.
    DOI Scopus4 WoS3
    2022 Wong, D., Anwar, M., Debnath, S., Hamid, A., Izman, S., Basak, A., & Pramanik, A. (2022). Tensile Strength and Morphological Behavior of Treated Oil Pam Empty Fruit Bunch Particle Reinforced Polymeric Composite. Materials Science Forum, 1064, 27-37.
    DOI Scopus3
    2022 Fadzil, A. F. B. A., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2022). Role of surface quality on biocompatibility of implants - A review. Annals of 3D Printed Medicine, 8, 100082.
    DOI Scopus54
    2022 Vu, M., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2022). Progress and challenges on extrusion based three dimensional (3D) printing of biomaterials. Bioprinting, 27, e00223.
    DOI Scopus22
    2022 Subramaniam, S., Nithyaprakash, R., Naveenkumar, R., Abbas, G., Uddin, M. S., Pramanik, A., . . . Prakash, C. (2022). Finite element methods in analyzing contact mechanics to estimate the wear of hard biomaterials in human hip prosthesis-A review. Jurnal Tribologi, 33, 39-70.
    Scopus1 WoS1
    2022 Tran, N. T., Dang, M. P., Pramanik, A., Basak, A., Shankar, S., Buddhi, D., & Dao, T. P. (2022). A computational design of robotic grasper by intelligence-based topology optimization for microassembly and micromanipulation. Robotics and Autonomous Systems, 156, 104209.
    DOI Scopus6 WoS6
    2022 Kurdi, A., Alshihri, S., Tabbakh, T., Darwish, N. B., Saedon, J. B., & Basak, A. K. (2022). Compressive strength and deformation behavior of the hybrid S phase layer under micro-pillar compression. Materials Science and Engineering A, 861, 8 pages.
    DOI Scopus9 WoS9
    2022 Subramaniam, S., Raju, N., Ganesan, A., Rajavel, N., Chenniappan, M., Prakash, C., . . . Dixit, S. (2022). Artificial Intelligence Technologies for Forecasting Air Pollution and Human Health: A Narrative Review. Sustainability, 14(16), 9951.
    DOI Scopus124 WoS55
    2022 Prakash, C., Kotecha, K., Pramanik, A., Basak, A., & Shankar, S. (2022). Synthesis of functionalized HAp-surface on β-Ti alloy using ball-burnishing assisted EDC process for biomedical application. Archives of Civil and Mechanical Engineering, 22(4), 15 pages.
    DOI Scopus3 WoS3
    2022 Thakur, G., Singh, Y., Singh, R., Prakash, C., Saxena, K. K., Pramanik, A., . . . Subramaniam, S. (2022). Development of GGBS-Based Geopolymer Concrete Incorporated with Polypropylene Fibers as Sustainable Materials. Sustainability, 14(17), 10639.
    DOI Scopus34 WoS23
    2022 Shankar, S., Nithyaprakash, R., Abbas, G., Naveenkumar, R., Prakash, C., Pramanik, A., & Basak, A. K. (2022). Tribological Behavior of AZ31 Alloy Against Si<inf>3</inf>N<inf>4</inf> Using In-vitro and In-silico Submodeling Approach for Human Hip Prosthesis. Silicon, 15(2), 983-991.
    DOI Scopus7 WoS6
    2022 Chappell, B., Pramanik, A., Basak, A. K., Sarker, P. K., Prakash, C., Debnath, S., & Shankar, S. (2022). Processing household plastics for recycling – A review. Cleaner Materials, 6, 22 pages.
    DOI Scopus30 WoS21
    2021 Basak, A. K., Hossain, M. R., Pramanik, A., Shah, D. R., Prakash, C., Shankar, S., & Debnath, S. (2021). Use of duck feather waste as a reinforcement medium in polymer composites. Cleaner Materials, 1, 100014-1-100014-11.
    DOI Scopus6 WoS4
    2021 Shankar, S., Nithyaprakash, R., Abbas, G., Naveen kumar, R., Pramanik, A., Basak, A. K., & Prakash, C. (2021). In-vitro tribological study and submodeling finite element technique in analyzing wear of zirconia toughened alumina against alumina with bio-lubricants for hip implants. Medical Engineering and Physics, 98, 83-90.
    DOI Scopus12 WoS9 Europe PMC2
    2021 Khieng, T. K., Debnath, S., Anwar, M., Pramanik, A., & Basak, A. K. (2021). Single-Walled Carbon Nanotube-Enhanced Bagasse-Epoxy Hybrid Composites under Varied Low Tensile Strain Rates. Applied Mechanics, 2(4), 863-877.
    DOI Scopus1 WoS1
    2021 Khieng, T. K., Debnath, S., Ting Chaw Liang, E., Anwar, M., Pramanik, A., & Basak, A. K. (2021). A Review on Mechanical Properties of Natural Fibre Reinforced Polymer Composites under Various Strain Rates. Journal of Composites Science, 5(5), 130-1-130-13.
    DOI Scopus42 WoS32
    2021 Prakash, C., Wandra, R., Singh, S., Pramanik, A., Basak, A., Aggarwal, A., & Yadaiah, N. (2021). Synthesis of functionalized TiO2-loaded HAp-coating by ball-burnishing assisted electric discharge cladding process. Materials Letters, 301, 1-4.
    DOI Scopus14 WoS10
    2021 Yuan, C. G., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2021). Drilling of titanium alloy (Ti6Al4V)–a review. Machining Science and Technology, 25(4), 637-702.
    DOI Scopus64 WoS50
    2021 Subramaniam, S., Nithyaprakash, R., Abbas, G., Pramanik, A., & Basak, A. K. (2021). Tribological behavior of silicon nitride-based ceramics-a review. Jurnal Tribologi, 29, 57-71.
    Scopus6 WoS5
    2021 Basak, A. K., Celis, J. P., Vardavoulias, M., & Matteazzi, P. (2021). Abrasive wear of nanostructured cermet coatings in dry and slurry conditions. International Journal of Refractory Metals and Hard Materials, 100, 1-8.
    DOI Scopus9 WoS6
    2021 Pramanik, A., Basak, A. K., Prakash, C., Shankar, S., Sharma, S., & Narendranath, S. (2021). Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy. Journal of Materials Engineering and Performance, 30(12), 8926-8935.
    DOI Scopus47 WoS41
    2021 Basak, A., Pramanik, A., Prakash, C., & Kotecha, K. (2021). Micro-mechanical characterization of superficial layer synthesized by electric discharge machining process. Materials Letters, 305, 1-4.
    DOI Scopus14 WoS14
    2021 Kurdi, A., & Basak, A. K. (2021). Micro-mechanical behaviour of selective laser melted Ti6Al4V under compression. Materials Science and Engineering A, 826, 1-11.
    DOI Scopus29 WoS26
    2021 Tabbakh, T., Kurdi, A., & Basak, A. K. (2021). Effect of strain rate and extrinsic size effect on micro-mechanical properties of zr-based bulk metallic glass. Metals, 11(10), 1611.
    DOI Scopus4 WoS3
    2021 Shankar, S., Nithyaprakash, R., Kumar, R. N., Aravinthan, R., Pramanik, A., & Basak, A. K. (2021). Effect of loads and bio-lubricants on tribological study of zirconia and zirconia toughened alumina against ti6al4v for hip prosthesis. Surface Review and Letters, 30(1), 2141006.
    DOI Scopus1 WoS1
    2021 Juri, A. Z., Basak, A. K., & Yin, L. (2021). Microstructural responses of Zirconia materials to in-situ SEM nanoindentation.. J Mech Behav Biomed Mater, 118, 1-12.
    DOI Scopus11 WoS12 Europe PMC4
    2021 Prakash, C., Pramanik, A., Basak, A. K., Dong, Y., Debnath, S., Shankar, S., . . . Zheng, H. Y. (2021). Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers. Materials, 14(7), 1699.
    DOI Scopus9 WoS8 Europe PMC2
    2021 Prakash, C., Singh, S., Pramanik, A., Basak, A., Królczyk, G., Bogdan-Chudy, M., . . . Zheng, H. Y. (2021). Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications. Journal of Materials Research and Technology, 11, 600-617.
    DOI Scopus50 WoS47
    2021 Imani, M., Dastanpoor, E., Enayati, M. H., & Basak, A. K. (2021). Thermodynamic Prediction of Phase Formation in Ni–P Alloy System During Mechanical Alloying: Comparison with Electroless Plating Technique. Metals and Materials International, 27(6), 1366-1373.
    DOI Scopus5 WoS5
    2021 Dey, R. K., Basak, A., & Ray, S. (2021). Diffuse flux of PeV neutrinos from centrifugally accelerated protons in active galactic nuclei. EPL, 136(6), 7 pages.
    DOI
    2021 Dey, R. K., Basak, A., Ray, S., & Sarkar, T. (2021). Newly Born Extragalactic Millisecond Pulsars as Efficient Emitters of PeV Neutrinos. BRAZILIAN JOURNAL OF PHYSICS, 51(5), 1406-1415.
    DOI WoS3
    2020 Hakami, F., Pramanik, A., Basak, A. K., Ridgway, N., & Islam, M. N. (2020). Effect of abrasive particle size on tribological behavior of elastomers. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234(3), 373-385.
    DOI Scopus10 WoS8
    2020 Jin, S. Y., Pramanik, A., Basak, A. K., Prakash, C., Shankar, S., & Debnath, S. (2020). Burr formation and its treatments—a review. International Journal of Advanced Manufacturing Technology, 107(5-6), 22 pages.
    DOI Scopus94 WoS79
    2020 Paswan, K., Pramanik, A., Chattopadhyaya, S., & Basak, A. K. (2020). A novel approach towards sustainable electrical discharge machining of metal matrix composites (MMCs). International Journal of Advanced Manufacturing Technology, 106(3-4), 1477-1486.
    DOI Scopus23 WoS15
    2020 Singh, P., Pramanik, A., Basak, A. K., Prakash, C., & Mishra, V. (2020). Developments of non-conventional drilling methods—a review. International Journal of Advanced Manufacturing Technology, 106(5-6), 2133-2166.
    DOI Scopus44 WoS39
    2020 Pralzash, C., Singh, S., Basak, A., Krolczyk, G., Pramanik, A., Lamberti, L., & Pruncu, C. (2020). Processing of Ti(50)Nb(50-x)HA(x) composites by rapid microwave sintering technique for biomedical applications. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 9(1), 242-252.
    DOI Scopus66 WoS39
    2020 Pramanik, A., Basak, A. K., Littlefair, G., Debnath, S., Prakash, C., Singh, M. A., . . . Singh, R. K. (2020). Methods and variables in Electrical discharge machining of titanium alloy – A review. Heliyon, 6(12), e05554.
    DOI Scopus78 WoS57 Europe PMC8
    2020 Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., Basak, A. K., Pandey, S. M., . . . Litak, G. (2020). Tribological Properties of Chromium Nitride on the Cylinder Liner under the Influence of High Temperature.. Materials (Basel), 13(20), 15 pages.
    DOI Scopus10 WoS9 Europe PMC2
    2020 Debnath, S., Ke Khieng, T., Anwar, M., Basak, A. K., & Pramanik, A. (2020). Strain Rate Sensitivity of Epoxy Composites Reinforced with Varied Sizes of Bagasse Particles. Journal of Composites Science, 4(3), 110.
    DOI Scopus7 WoS8
    2020 Singh, S., Prakash, C., Pramanik, A., Basak, A., Shabadi, R., Królczyk, G., . . . Babbar, A. (2020). Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis.. Materials (Basel), 13(22), 1-15.
    DOI Scopus29 WoS17 Europe PMC3
    2019 Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., & Basak, A. K. (2019). Wear of chromium nitride coating under high loads and speeds. International Journal of Surface Science and Engineering, 13(4), 263-282.
    DOI Scopus7 WoS7
    2019 Hakami, F., Pramanik, A., Islam, N., Basak, A., & Ridgway, N. (2019). Study of effective parameters on wear behavior of rubbers based on statistical methods. Polymers for Advanced Technologies, 30(6), 1415-1426.
    DOI Scopus13 WoS9
    2019 Singh, S. K., Chattopadhyaya, S., Pramanik, A., Kumar, S., & Basak, A. K. (2019). Effect of lubrication on the wear behaviour of CrN coating deposited by PVD process. International Journal of Surface Science and Engineering, 13(1), 60-78.
    DOI Scopus22 WoS17
    2019 Hakami, F., Pramanik, A., Basak, A. K., & Ridgway, N. (2019). Elastomers’ wear: Comparison of theory with experiment. Tribology International, 135, 46-54.
    DOI Scopus25 WoS22
    2019 Pramanik, A., Basak, A. K., Uddin, M. S., Shankar, S., Debnath, S., & Islam, M. N. (2019). Burr formation during drilling of mild steel at different machining conditions. Materials and Manufacturing Processes, 34(7), 726-735.
    DOI Scopus31 WoS25
    2019 Pramanik, A., Basak, A. K., & Prakash, C. (2019). Understanding the wire electrical discharge machining of Ti6Al4V alloy. Heliyon, 5(4), 17 pages.
    DOI Scopus94 WoS60 Europe PMC8
    2019 Imani, M., Enayati, M. H., & Basak, A. K. (2019). A novel approach for mechanical alloying amorphisation in magnetic Fe-Co alloy system. Materials Research Express, 6(7), 1-10.
    DOI Scopus5 WoS5
    2019 Pramanik, A., Islam, M. N., Basak, A. K., Dong, Y., Littlefair, G., & Prakash, C. (2019). Optimizing dimensional accuracy of titanium alloy features produced by wire electrical discharge machining. Materials and Manufacturing Processes, 34(10), 1083-1090.
    DOI Scopus80 WoS62
    2019 Basak, A. K., Pramanik, A., & Prakash, C. (2019). Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression. Materials Science and Engineering A, 763, 1-9.
    DOI Scopus104 WoS69
    2019 Pramanik, A., & Basak, A. K. (2019). Effect of wire electric discharge machining (EDM) parameters on fatigue life of Ti-6Al-4V alloy. International Journal of Fatigue, 128, 1-9.
    DOI Scopus40 WoS35
    2019 Dey, R. K., Dam, S., & Basak, A. (2019). A novel approach for deducing the mass composition of cosmic rays from lateral densities of EAS particles. EPL, 127(3), 7 pages.
    DOI WoS3
    2018 Dey, R. K., Dam, S., Ray, S., Basak, A., & Chattopadhyay, P. (2018). Determination of the mass and energy of primary cosmic rays above 100 TeV. INDIAN JOURNAL OF PHYSICS, 92(11), 1357-1365.
    DOI WoS1
    2018 Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G., & Prakash, C. (2018). Evaluating hole quality in drilling of Al 6061 alloys. Materials, 11(12), 13 pages.
    DOI Scopus97 WoS70 Europe PMC9
    2018 Kontonikas-Charos, A., Ciobanu, C., Cook, N., Ehrig, K., Ismail, R., Krneta, S., & Basak, A. (2018). Feldspar mineralogy and rare-earth element (re)mobilization in iron-oxide copper gold systems from South Australia: a nanoscale study. Mineralogical Magazine, 82(Suppl. S1), S173-S197.
    DOI Scopus31 WoS30
    2018 Basak, A., & Zhang, L. (2018). Deformation of Ti-based bulk metallic glass under a cutting tip. Tribology Letters, 66(1), 1-8.
    DOI Scopus10 WoS10
    2018 Pramanik, A., & Basak, A. (2018). Fracture and fatigue life of Al-based MMCs machined at different conditions. Engineering Fracture Mechanics, 191, 33-45.
    DOI Scopus33 WoS28
    2018 Owen, N., Ciobanu, C., Cook, N., Slattery, A., & Basak, A. (2018). Nanoscale study of clausthalite-bearing symplectites in Cu-Au-(U) ores: implications for ore genesis. Minerals, 8(2), 67-1-67-28.
    DOI Scopus24 WoS23
    2018 Pramanik, A., Basak, A., Dixit, A., & Chattopadhyaya, S. (2018). Processing of duplex stainless steel by WEDM. Materials and Manufacturing Processes, 33(14), 1559-1567.
    DOI Scopus33 WoS27
    2018 Wong, C., Pramanik, A., & Basak, A. (2018). Residual stress generation in metal matrix composites after cooling. Materials Science and Technology (United Kingdom), 34(11), 1388-1400.
    DOI Scopus23 WoS19
    2018 Basak, A., Pramanik, A., Riazi, H., Silakhori, M., & Netting, A. (2018). Development of Pb-free nanocomposite solder alloys. Journal of Composites Science, 2(2), 1-9.
    DOI Scopus8 WoS7
    2018 Pramanik, A., Basak, A., Dong, Y., Shankar, S., & Littlefair, G. (2018). Milling of nanoparticles reinforced Al-based metal matrix composites. Journal of Composites Science, 2(1), 13-1-13-12.
    DOI Scopus17 WoS15
    2018 Alshemary, A., Pramanik, A., Basak, A., & Littlefair, G. (2018). Accuracy of duplex stainless steel feature generated by electrical discharge machining (EDM). Measurement: Journal of the International Measurement Confederation, 130, 137-144.
    DOI Scopus27 WoS19
    2018 Pramanik, A., & Basak, A. (2018). Sustainability in wire electrical discharge machining of titanium alloy: Understanding wire rupture. Journal of Cleaner Production, 198, 472-479.
    DOI Scopus52 WoS39
    2018 Kurdi, A., & Basak, A. (2018). Deformation of electrodeposited gradient Co/Sn multilayered coatings under micro-pillar compression. Engineering Fracture Mechanics, 204, 138-146.
    DOI Scopus19 WoS17
    2017 Pramanik, A., Islam, M., Davies, I., Boswell, B., Dong, Y., Basak, A., . . . Chattopadhyaya, S. (2017). Contribution of machining to the fatigue behaviour of metal matrix composites (MMCs) of varying reinforcement size. International Journal of Fatigue, 102, 9-17.
    DOI Scopus30 WoS27
    2017 Pramanik, A., Basak, A., Dong, Y., Sarker, P., Uddin, M., Littlefair, G., . . . Chattopadhyaya, S. (2017). Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys - a review. Composites: Part A, 101, 1-29.
    DOI Scopus592 WoS509
    2017 Hakami, F., Pramanik, A., & Basak, A. (2017). Duplex surface treatment of steels by nitriding and chromizing. Australian Journal of Mechanical Engineering, 15(1), 55-72.
    DOI Scopus19 WoS14
    2017 Hakami, F., Pramanik, A., & Basak, A. K. (2017). Tool wear and surface quality of metal matrix composites due to machining: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(5), 739-752.
    DOI Scopus62 WoS53
    2017 Pramanik, A., Dixit, A., Chattopadhyaya, S., Uddin, M., Dong, Y., Basak, A., & Littlefair, G. (2017). Fatigue life of machined components. Advances in Manufacturing, 5(1), 59-76.
    DOI Scopus50 WoS43
    2017 Uddin, M., Pham, B., Sarhan, A., Basak, A., & Pramanik, A. (2017). Comparative study between wear of uncoated and TiAlN-coated carbide tools in milling of Ti6Al4V. Advances in Manufacturing, 5(1), 83-91.
    DOI Scopus27 WoS21
    2017 Hakami, F., Pramanik, A., Ridgway, N., & Basak, A. (2017). Developments of rubber material wear in conveyer belt system. Tribology International, 111, 148-158.
    DOI Scopus68 WoS55
    2016 Pramanik, A., Islam, M. N., Boswell, B., Basak, A. K., Dong, Y., & Littlefair, G. (2016). Accuracy and finish during wire electric discharge machining of metal matrix composites for different reinforcement size and machining conditions. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(6), 1068-1078.
    DOI Scopus42 WoS26
    2016 Pramanik, A., & Basak, A. (2016). Degradation of wire electrode during electrical discharge machining of metal matrix composites. Wear, 346-347, 124-131.
    DOI Scopus41 WoS33
    2016 Pramanik, A., & Basak, A. K. (2016). Effect of machining parameters on deformation behaviour of Al-based metal matrix composites under tension. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(2), 9 pages.
    DOI Scopus14 WoS10
    2015 Pramanik, A., Basak, A., Islam, M., & Littlefair, G. (2015). Electrical discharge machining of 6061 aluminium alloy. Transactions of Nonferrous Metals Society of China, 25(9), 2866-2874.
    DOI Scopus66 WoS56
    2015 Georgiou, E., Buijnsters, J., Wang, H., Drees, D., Basak, A., & Celis, J. (2015). Nanostructured gradient Co-Sn electrodeposits as alternative to Sn connector contacts. Surface and Coatings Technology, 271, 148-155.
    DOI Scopus14 WoS13
    2015 Pramanik, A., Littlefair, G., & Basak, A. (2015). Weldability of duplex stainless steel. Materials and Manufacturing Processes, 30(9), 1053-1068.
    DOI Scopus57 WoS50
    2015 Pramanik, A., Basak, A., & Islam, M. (2015). Effect of reinforced particle size on wire EDM of MMCs. International Journal of Machining and Machinability of Materials, 17(2), 139-149.
    DOI Scopus29
    2015 Costin, W. L., & Basak, A. K. (2015). Micro-micromechanical Properties of Weld Metal. Microscopy and Microanalysis, 21(S3), 2159-2160.
    DOI
    2014 Basak, A., Celis, J., Vardavoulias, M., & Matteazzi, P. (2014). Coefficient of friction measured from nano- to macro-normal loads on plasma sprayed nanostructured cermet coatings. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, 45(2), 1049-1056.
    DOI Scopus12 WoS9
    2013 Zhang, L., & Basak, A. (2013). Quantitative prediction of phase transformations in silicon during nanoindentation. Philosophical Magazine Letters, 93(8), 448-456.
    DOI Scopus10 WoS10
    2013 Basak, A. K. (2013). Failure mechanisms of nano-particle reinforced metal matrix composite. Advanced Materials Research.
    2013 Pramanik, A., Islam, M., Basak, A., & Littlefair, G. (2013). Machining and tool wear mechanisms during machining titanium alloys. Advanced Materials Research, 651, 338-343.
    DOI Scopus54
    2013 Islam, M., Pramanik, A., & Basak, A. (2013). Off-line feed rate scheduling based on a mechanistic cutting force on discrete segments during end milling. Advanced Materials Research, 774-776, 1174-1180.
    DOI
    2013 Pramanik, A., & Basak, A. (2013). Ductile Mode Turning of Brittle Materials and its Practical Aspects. Advanced Materials Research, 651, 350-354.
    DOI Scopus2
    2012 Basak, A. K., Celis, J. -P., Ponthiaux, P., Wenger, F., Vardavoulias, M., & Matteazzi, P. (2012). Effect of nanostructuring and Al alloying on corrosion behaviour of thermal sprayed WC–Co coatings. Materials Science and Engineering: A, 558, 377-385.
    DOI Scopus33 WoS26
    2012 Basak, A., Celis, J., Vardavoulias, M., & Matteazzi, P. (2012). Effect of nanostructuring and Al alloying on friction and wear behaviour of thermal sprayed WC-Co coatings. Surface and Coatings Technology, 206(16), 3508-3516.
    DOI Scopus73 WoS63
    2010 Basak, A. K., Zein Eddine, W., Celis, J. P., & Matteazzi, P. (2010). Characterisation and tribological investigation on thermally processed nanostructured fe-based and cu-based cermet materials. Journal of Nanoscience and Nanotechnology, 10(2), 1179-1184.
    DOI Scopus11 WoS6 Europe PMC1
    2010 Basak, A. K., Fan, J. M., Wang, J., & Mathew, P. (2010). Material removal mechanisms of monocrystalline silicon under the impact of high velocity micro-particles. Wear, 269(3-4), 269-277.
    DOI Scopus25 WoS19
    2008 Basak, A. K., Diomidis, N., Celis, J. P., Masquelier, C., & Warichet, D. (2008). Chemical reactivity of thermo-hardenable steel weld joints investigated by electrochemical impedance spectroscopy. Electrochimica Acta, 53(25), 7575-7582.
    DOI Scopus14 WoS13
    2008 Basak, A. K., Achanta, S., Celis, J. P., Vardavoulias, M., & Matteazzi, P. (2008). Structure and mechanical properties of plasma sprayed nanostructured alumina and FeCuAl-alumina cermet coatings. Surface and Coatings Technology, 202(11), 2368-2373.
    DOI Scopus36 WoS30
    2007 Basak, A. K., Achanta, S., De Bonte, M., Celis, J. P., Vardavoulias, M., & Matteazzi, P. (2007). Effect of Al and Cr addition on tribological behaviour of HVOF and APS nanostructured WC-Co coatings. Transactions of the Institute of Metal Finishing, 85(6), 310-315.
    DOI Scopus23 WoS18
    2006 Basak, A. K., Matteazzi, P., Vardavoulias, M., & Celis, J. P. (2006). Corrosion-wear behaviour of thermal sprayed nanostructured FeCu/WC-Co coatings. Wear, 261(9), 1042-1050.
    DOI Scopus76 WoS57
    - Juri, A. Z., Azmi, F., & Basak, A. K. (n.d.). Wear and Corrosion Behaviour of Hybrid S Phase Layer.

  • Books
    Year Citation
    2025 Pramanik, A., Basak, A., Dong, Y., Prakash, C., & Davim, J. P. (2025). Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing. Elsevier.
    DOI
    2025 Pramanik, A., Basak, A., Dong, Y., Prakash, C., & Davim, J. P. (2025). Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing. Elsevier.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Tribology of Elastomers. New York, NY, USA: Springer.
    DOI
    2015 Pramanik, A., & Basak, A. (2015). Stainless steel: Microstructure, mechanical properties and methods of application. Nova Science Pub Incorporated.
    Scopus17
    2015 Basak, A. K., & Pramanik, A. (2015). Preface.
    Scopus1

  • Book Chapters
    Year Citation
    2025 Mahdin, S., Basak, A., & Pramanik, A. (2025). Application of nanocomposite hydrogels for drug delivery. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 243-280). Elsevier.
    DOI
    2025 Basak, A., Pramanik, A., Shankar, S., Prakash, C., & Debnath, S. (2025). Micromechanical properties of Al-based metal matrix nanocomposites. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 199-213). Elsevier.
    DOI
    2025 Raheja, G., Prakash, C., Vasudev, H., Pramanik, A., Basak, A., & Shankar, S. (2025). Advanced research progress in nanocomposites: manufacturing and applications. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 575-616). Elsevier.
    DOI Scopus1
    2025 Mehta, A., Vasudev, H., Prakash, C., Pramanik, A., Basak, A., & Shankar, S. (2025). An overview of 3D printing for modeling polymers, bio-nanocomposite, and nanocomposites materials. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 517-548). Elsevier.
    DOI
    2025 Mehta, A., Vasudev, H., Prakash, C., Pramanik, A., Basak, A., & Shankar, S. (2025). State of the art in machine learning for the purpose of optimizing and predicting the properties of polymeric nanocomposites. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 549-573). Elsevier.
    DOI
    2025 Paul, K. J., Pramanik, A., Basak, A., & Prakash, C. (2025). Carbon fiber-reinforced polymer nanocomposites: classification, synthesis, and properties. In A. Pramanik, A. Basak, & J. D. Paulo (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 617-673). Elsevier.
    DOI
    2025 Shantharaman, P. P., Prabhakar, M., Anandakrishnan, V., Pramanik, A., & Basak, A. (2025). Synthesis and cold workability behavior of Al-SiC-Y<inf>2</inf>O<inf>3</inf> hybrid nanocomposites produced through powder metallurgy. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 281-414). Elsevier.
    DOI
    2025 Shankar, S., Nithyaprakash, R., Naveen Kumar, R., Aravinthan, R., Pramanik, A., & Basak, A. K. (2025). Effect of loads and bio-lubricants on tribological study of zirconia and zirconia toughened alumina against Ti6al4v for hip prosthesis. In Surface Engineering and Performance of Biomaterials (pp. 77-91). WORLD SCIENTIFIC.
    DOI
    2025 Basak, A., Pramanik, A., Hossain, M. R., Shah, D. R., Prakash, C., Debnath, S., & Shankar, S. (2025). An experimental investigation on the mechanical properties of duck feather waste-reinforced epoxy nanocomposites. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 181-198). Elsevier.
    DOI
    2025 Basak, A., Pramanik, A., Silakhori, M., & Chattopdhyaya, S. (2025). Effect of ZnO dopant and sintering temperature on the microstructure and phases of barium titanate nanocomposites. In A. Pramanik, A. Basak, & J. P. Davim (Eds.), Nanocomposite Manufacturing Technologies: Fundamental Principles, Mechanisms, and Processing (pp. 215-225). Elsevier.
    DOI
    2024 Juri, A. Z., Basak, A. K., & Yin, L. (2024). Fracture Behaviour of Zirconia-Reinforced Lithium Silicate Glass–Ceramic Composite. In A. Ghosh, D. Chua, F. deSouza, C. Aktas, Y. Han, J. Gong, & M. Jawaid (Eds.), Springer Proceedings in Materials (Vol. 40, pp. 319-325). Springer Nature Singapore.
    DOI
    2023 Basak, A., Pramanik, A., Prakash, C., & Subramaniam, S. (2023). Thermomechanical processing of Ti-alloy for high-end applications. In S. Gurgen, & C. Pruncu (Eds.), Modern Manufacturing Processes for Aircraft Materials (pp. 125-168). Elsevier.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Summary. In SpringerBriefs in Applied Sciences and Technology (pp. 149-151). Springer Nature Singapore.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Introduction. In SpringerBriefs in Applied Sciences and Technology (pp. 1-3). Springer Nature Singapore.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Effect of the Applied Load. In SpringerBriefs in Applied Sciences and Technology (pp. 61-88). Springer Nature Singapore.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Statistical Analysis. In SpringerBriefs in Applied Sciences and Technology (pp. 121-133). Springer Nature Singapore.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Preface. In Unknown Book (pp. v-vi).
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Development of an Experimental Model. In SpringerBriefs in Applied Sciences and Technology (pp. 135-147). Springer Nature Singapore.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Effect of the Abrasive Particle Size. In SpringerBriefs in Applied Sciences and Technology (pp. 89-110). Springer Nature Singapore.
    DOI Scopus1
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Materials and Methodology. In SpringerBriefs in Applied Sciences and Technology (pp. 53-60). Springer Nature Singapore.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Wear of Rubber Material in Conveyor Belt System. In SpringerBriefs in Applied Sciences and Technology (pp. 23-51). Springer Nature Singapore.
    DOI Scopus1
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). General Background. In SpringerBriefs in Applied Sciences and Technology (pp. 5-21). Springer Nature Singapore.
    DOI
    2022 Hakami, F., Pramanik, A., & Basak, A. K. (2022). Effect of the Three-Body Abrasion. In F. Hakami, A. K. Basak, & A. Pramanik (Eds.), SpringerBriefs in Applied Sciences and Technology (pp. 111-120). Singapore: Springer Nature Singapore.
    DOI
    2022 Mardi, K. B., Dixit, A. R., Pramanik, A., & Basak, A. K. (2022). Tribology in (abrasive) water jet machining: A review. In A. Pramanik (Ed.), Machining and Tribology: Processes, Surfaces, Coolants, and Modeling (pp. 113-125). Amsterdam, Netherlands: Elsevier.
    DOI Scopus4
    2021 Debnath, S., Anwar, M., Pramanik, A., & Basak, A. K. (2021). Nanofluid-minimum quantity lubrication system in machining: towards clean manufacturing. In K. Gupta, & K. Salonitis (Eds.), Sustainable Manufacturing (pp. 109-135). Amsterdam, Netherlands: Elsevier.
    DOI Scopus11
    2021 Basak, A. K., & Pramanik, A. (2021). Abrasive wear during machining of hard nanostructured cermet coatings. In A. Pramanik (Ed.), Machining and Tribology: Processes, Surfaces, Coolants, and Modeling (pp. 93-112). Amsterdam, Netherlands: Elsevier.
    DOI Scopus3
    2020 Masrangi, D. T., Salim, H., Hakami, F., Pramanik, A., & Basak, A. K. (2020). Wear of rubbers and its control in conveyer belt system. In K. Gupta (Ed.), Surface Engineering of Modern Materials (pp. 53-79). Cham, Switzerland: Springer.
    DOI Scopus2
    2020 Pramanik, A., Basak, A. K., Littlefair, G., Dixitd, A. R., & Chattopadhyayad, S. (2020). Stress in the interfaces of metal matrix composites (MMCs) in thermal and tensile loading. In K. Goh, M. K. Aswathi, R. T. De Silva, & S. Thomas (Eds.), Interfaces in Particle and Fibre Reinforced Composites: Current Perspectives on Polymer, Ceramic, Metal and Extracellular Matrices (pp. 455-471). Duxford, United Kingdom: Woodhead Publishing.
    DOI Scopus3
    2020 Pramanik, A., Basak, A. K., Islam, M. N., Dong, Y., Debnath, S., & Vora, J. J. (2020). Optimization of accuracy and surface finish of drilled holes in 350 mild steel. In K. Gupta, & M. K. Gupta (Eds.), Optimization of Manufacturing Processes (pp. 65-90). Cham, Switzerland: Springer.
    DOI Scopus3
    2019 Hocking, L., Pramanik, A., Basak, A. K., & Chattopadhyaya, S. (2019). Designing and analysis of the femoral neck for an artificial hip joint prosthesis. In J. P. Davim (Ed.), Mechanical Behaviour of Biomaterials (pp. 47-65). Cambridge, MA; United States: Woodhead Publishing.
    DOI Scopus8
    2019 Pramanik, A., Islam, M., Basak, A., & Dong, Y. (2019). Learning Enhancement of Project-Based Unit in Mechanical Engineering Undergraduate Course. In J. P. Davim (Ed.), Manufacturing Engineering Education (pp. 73-84). USA: Chandos Publishing.
    DOI Scopus4
    2017 Basak, A., Pramanik, A., Hossain, M., & Rahman, A. (2017). Magnetic Behavior of Nanostructured Materials. In S. Zhang, & D. Zhao (Eds.), Advances in Magnetic Materials Processing, Properties, and Performance (pp. 1-65). London: CRC Press.
    DOI
    2016 Hakami, F., Pramanik, A., & Basak, A. (2016). Effect of machining on the fatigue life of steels. In P. Davim, P. Rosa, & V. Astakhov (Eds.), Metal Cutting Technologies: Progress and Current Trends (pp. 76-94). Germany: Walter de Gruyter.
    DOI Scopus4
    2015 Pramanik, A., Sanghvi, H., & Basak, A. (2015). Object-Based Final-Year Project: Designing and Manufacturing a Quick Stop Device. In J. Davim (Ed.), Modern Manufacturing Engineering (pp. 271-299). Switzerland: Springer.
    DOI
    2015 Basak, A., Pramanik, A., Islam, M., & Anandakrishnan, V. (2015). Challenges and recent developments on nanoparticle-reinforced metal matrix composites. In Y. Dong, R. Umer, & A. -T. Lau (Eds.), Fillers and Reinforcements for Advanced Nanocomposites (1st edition ed., pp. 349-367). Cambridge: Elsevier.
    DOI Scopus31
    2015 Pramanik, A., Basak, A. K., Nomani, J., Littlefair, G., Islam, M. N., & Anandakrishnan, V. (2015). Weldability and machinability of duplex stainless steel. In Stainless Steel Microstructure Mechanical Properties and Methods of Application (pp. 207-238).
    Scopus2
    2015 Hakami, F., Pramanik, A., Islam, M. N., Basak, A. K., & Anandakrishnan, V. (2015). Surface engineering of stainless steel. In Stainless Steel Microstructure Mechanical Properties and Methods of Application (pp. 239-271).

  • Conference Papers
    Year Citation
    2024 Basak, A. K., & Kurdi, A. (2024). Investigation on Micro-scale Deformation of Additively Manufactured Inconel 718: Role of Segregation on Melt-pool Boundaries. In Microscopy and Microanalysis Vol. 30 (pp. 1247-1249). Cleveland, Ohio: Oxford University Press (OUP).
    DOI
    2023 Azmi, M. F. M., Saedon, J., Adenan, M. S., Haruman, E., & Basak, A. (2023). Influence of treatment temperature towards the S phase layer formation on medical grade ASTM F138 stainless steel. In AIP Conference Proceedings Vol. 2571 (pp. 020009). Online: AIP Publishing.
    DOI Scopus1
    2020 Alam, N., Iqbal, M. M., Prakash, C., Singh, S., & Basak, A. (2020). Influence of the microstructural and mechanical properties of reinforced graphene in magnesium matrix fabricated by friction stir processing. In Advances in Materials Science and Engineering: Proceedings of the International Conference on Functional Materials, Manufacturing and Performances (ICFMMP 2019), as published in Lecture Notes in Mechanical Engineering (pp. 235-247). Singapore: Springer.
    DOI Scopus3
    2013 Pramanik, A., & Basak, A. (2013). Ultra-precision machinability and properties of Electroless-nickel. In Advanced Materials Research Vol. 651 (pp. 344-349). online: Scientific net.
    DOI Scopus3
    2013 Basak, A., Pramanik, A., & Islam, M. (2013). Failure mechanisms of nanoparticle reinforced metal matrix composite. In Advanced Materials Research Vol. 774-776 (pp. 548-551). Switzerland: Trans Tech Publications Ltd..
    DOI Scopus19 WoS14
    2012 Zhang, L. C., & Basak, A. K. (2012). AN ACCURATE PREDICTION OF SILICON PHASES UNDER NANOINDENTATION. In D. Chen, N. Narutaki, R. Fan, & A. Ochi (Eds.), PROGRESS OF MACHINING TECHNOLOGY (pp. 129-132). Tsubame, JAPAN: JAPAN SOC PRECISION ENGINEERING-JSPE.
    2012 Zhang, L. C., & Basak, A. K. (2012). PLASTIC DEFORMATION BEHAVIOR IN BULK METALLIC GLASS UNDER A CUTTING TIP. In D. Chen, N. Narutaki, R. Fan, & A. Ochi (Eds.), PROGRESS OF MACHINING TECHNOLOGY (pp. 117-120). Tsubame, JAPAN: JAPAN SOC PRECISION ENGINEERING-JSPE.
    WoS2
    2012 Zhang, L. C., & Basak, A. K. (2012). Plastic deformation behavior in bulk metallic glass under a cutting tip. In 10th International Conference on Progress of Machining Technology Icpmt 2012 (pp. 193-196).
    2012 Zhang, L. C., & Basak, A. K. (2012). An accurate prediction of silicon phases under nanoindentation. In 10th International Conference on Progress of Machining Technology Icpmt 2012 (pp. 100-103).
    2004 Basak, A. K., & Celis, J. P. (2004). Rrosion-wear behaviour of nano-structured coatings. In Eurocorr 2004 European Corrosion Conference Long Term Prediction and Modelling of Corrosion.
  • Position: Dualbeam Engineer
  • Phone: 83134080
  • Email: animesh.basak@adelaide.edu.au
  • Fax: 83134356
  • Campus: North Terrace
  • Building: Helen Mayo North, floor NG
  • Org Unit: Adelaide Microscopy
Connect With Me
External Profiles