Mohammad Uddin

APrf Mohammad Uddin

Associate Professor of Mechanical Engineering

School of Electrical and Mechanical Engineering

College of Engineering and Information Technology

Eligible to supervise Masters and PhD - email supervisor to discuss availability.

Available For Media Comment.

I am an Associate Professor in Mechanical Engineering at UniSA STEM in University of South Australia. Right after completing my PhD at University of Kyoto, I worked as a Postdoctoral Research Fellow in University of California Davis (UCDavis) and University of New South Wales (UNSW).
My current research focuses on innovative surface engineering, bio-manufacturing, design and processing of advanced materials, medical implants, smart biomedical sensors and surgical technology.
Due to growing aging population and undesired medical complications, health care cost and burden across the world is mounting. Therefore, development of emerging technologies is inevitable. Equipped with advanced research facilities and capacity, my lab collaborates with world leading researchers and takes fundamental interdisciplinary engineering and scientific approach to underpin the burning issues with an aim of developing innovative solutions.
My research activities are highly supported by intramural and external competitive research grants from industry, state, federal, CRC, ARC and OLT funding bodies. To date, I have secured a total research grant of A$2.2m, thanks to those generous agencies. Currently I lead a research team consisting of 2 PhD, 1 Master and 6 undegraduate project students.
My research complements and supports UniSA's key theme “Transforming Industries” thus contributing to sheer economical and societal development within Australia and the world. A recent highlight of my research work is development of an innovative surfacing approach to biodegradable Mg implants and smart sensor for healthcare industry.
To date, I published more than 50 articles in high quality and leading journals and conferences. Among are 38 journals, 11 conferences, 1 book chapter, 1 edited book. Details of my public research profiles can be accessed via ResearchGate, ResearchID, ORCID, Scopus and Google Scholar.
As of now, my h-index is 17 (Google Scholar) and 15 (Scopus), with a total citation of 1229 (Google Scholar) indicating international recognition of my research quality, leadership and scientific contribution in the areas.
My current research projects are:

Innovative surfacing technique for the manufacture of biodegradable implants
Surface engineering of advanced materials for improved surface integrity and fatigue life
Innovative surgical bone drilling system
Surface engineering for extended wear life of mining drill
Design and development of smart sensors for healthcare industry
Modelling and experimental assessment of biomechanics of engineered implants

I look for highly motivated and energetic undergraduate and postgraduate students who like to join my team and conduct research projects in the above topics. If interested, please contact me with your CV via E-mail.

  • Short-Listed and Nominated by UniSA STEM for 2020 UniSA Mid-Career Researcher in Research Excellency Category
  • My recent invention - Australian Provisional Patent on "Portable Load Cell" (Patent #: 2018902252)
  • My work just published - Open Access for anyone to download until October 24, 2020

Currently my research addresses and seeks for solutions to real world challenges and pressing problems in the topics below.

  • Innovative surfacing technique for the manufacture of biodegradable implants
  • Processing of advanced materials for improved surface integrity and fatigue life
  • Intelligent surgical bone drilling system for enhanced patient outcome and empowering of surgeons
  • Surface treatement for extended wear life oof mining components
  • Smart sensors and instruments for healthcare industry
  • FE modelling and expermental assessment of engineered implants

Year Citation
2025 Fernandes, G., Hatem, A., Roccisano, A., Uddin, M., Hall, C., & Schlaefer, T. (2025). Influence of Ball Burnishing Path Strategy on Surface Integrity and Performance of Laser-Cladded Inconel 718 Alloys. Metals, 15(11), 25 pages.
DOI
2025 Uddin, M., Rech, J., Hall, C., & Schlaefer, T. (2025). Directional Effect of Plasticity Ball Burnishing on Surface Finish, Microstructure, Residual Stress and Hardness of Laser Direct Energy Deposited Stellite 21 Alloy. Materials, 18(13, article no. 2971), 1-20.
DOI Scopus2 WoS2
2025 Uddin, M., Rech, J., Hall, C., & Schlaefer, T. (2025). Characterisation and analysis of surface integrity and residual stress in laser direct energy deposited 316 L alloy subject to plasticity ball burnishing. Scientific Reports, 15(1, article no. 23151), 1-17.
DOI
2025 Thangamuthu, M., Hanumegowda, P. K., Gnanasearan, S., & Uddin, M. (2025). Assessment of musculoskeletal disorders among bus drivers in South India: implications for health and safety. International Journal of Occupational Safety and Ergonomics, online(4), 1014-1024.
DOI
2025 Thit, M., Rocissano, A., Hatem, A., Uddin, M., Hall, C., & Schlaefer, T. (2025). Surface integrity and high-cycle fatigue life of direct laser metal deposited AISI 431 alloys modified by plasticity ball burnishing. International Journal of Fatigue, 190(108614), 1-13.
DOI Scopus10 WoS8
2025 Alam, S., Uddin, M., & Hall, C. (2025). Deformation and energy absorption characteristics of metallic thin-walled tube with hierarchical honeycomb lattice infills for crashworthiness application. Metals, 15(6), 1-25.
DOI
2024 Xu, Z., Wen, Y., Zheng, D., Uddin, M., & Stevens, G. (2024). On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates. Composite Interfaces, 31(1), 123-141.
DOI Scopus12
2024 Alam, S., Uddin, M., & Hall, C. (2024). A synergistic approach combining surface enhancement and buckling modes for improved axial crushing performance of thin-walled tubes. Journal of Applied Mechanics, 91(7, article no. 071005), 1-13.
DOI
2023 Li, T., Uddin, M., & Stevens, G. (2023). Effect of ball burnishing on surface roughness, wettability, mechanical integrity and antifouling resistance of UHMWPE. Surface and Coatings Technology, 475(130237), 1-11.
DOI Scopus8
2023 Fernandes, G. H. N., Bazon, V. T., Barbosa, L. M. Q., França, P. H. P., da Silva, M. B., Uddin, M., . . . Machado, Á. R. (2023). Performance comparison between internally cooled tools and flood cooling during grey cast iron turning. Journal of Manufacturing Processes, 85, 817-831.
DOI Scopus20
2023 Uddin, M., Santifoller, R., Hall, C., & Schlaefer, T. (2023). Effect of combined grinding-burnishing process on surface integrity, tribological and corrosion performance of laser-cladded Stellite 21 alloys. Advanced Engineering Materials, 25(8, article 2201332), 1-12.
DOI Scopus11 WoS12
2023 Santos, V., Uddin, M., & Hall, C. (2023). Mechanical surface treatments for controlling surface integrity and corrosion resistance of Mg alloy implants: a review. Journal of Functional Biomaterials, 14(5, article no. 242), 1-34.
DOI Scopus23 WoS23 Europe PMC3
2023 Mohanran, T., Uddin, M. S., & Thangarasu, S. K. (2023). Review on sensor design for cutting force measurement. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237(2), 455-466.
DOI Scopus14
2023 Rajavel, N., Subramaniam, S., Raju, N., Ganesan, A., Subramanian, S., Jeyamurthi, N. P., . . . Uddin, M. S. (2023). Short-term tribological study of ceramic biomaterials against MgAZ31 under bio-lubricants for hip joint replacements. International Journal of Surface Science and Engineering, 17(4), 280-294.
DOI Scopus2 WoS2
2022 Shankar, S., Nithyaprakash, R., Naveenkumar, R., Abbas, G., Uddin, M., Pramanik, A., . . . Prakash, C. (2022). Finite element methods in analyzing contact mechanics to estimate the wear of hard biomaterials in human hip prosthesis - A review. Jurnal Tribologi, 33, 39-70.
Scopus1 WoS1
2022 Wang, S., Cao, M., Wang, G., Cong, F., Meng, Q., Uddin, M., & Ma, J. (2022). Effect of graphene nanoplatelets on water absorption and impact resistance of fibre-metal laminates under varying environmental conditions. Composite Structures, 281(114977), 1-11.
DOI Scopus20 WoS17
2022 Uddin, M., Santifoller, R., Hall, C., & Schlaefer, T. (2022). A grinding-burnishing approach to enhancing surface integrity, tribological and corrosion behaviour of laser-cladded AISI 431 alloys. Journal of Manufacturing Science and Engineering, 144(7, article no. 071003), 1-13.
DOI Scopus11 WoS11
2022 Shankar, S., Nithyaprakash, R., Selvamani, K. A., Ponappa, K., Uddin, M., & Santhosh, B. R. (2022). Effect of radial clearance, corner radius and micro-lateralization on contact stress of metallic and ceramic hip prosthesis - a finite element analysis. Defence Science Journal, 72(3), 441-449.
DOI
2022 Uddin, M., Stevens, G., & Williams, D. (2022). Effect of indenter nose shape and layer configuration on the quasi-static perforation behaviour of metal-plastic laminates. Materials, 15(17), 1-19.
DOI Scopus1
2022 Shankar, S., Nithyaprakash, R., Selvamani, K. A., Ponappa, K., Uddin, M., & Santhosh, B. R. (2022). Effect of Radial Clearance, Corner Radius and Micro-Lateralization on Contact Stress of Metallic and Ceramic Hip Prosthesis – A Finite Element Analysis. Defence Science Journal, 72(3), 441-449.
DOI Scopus3
2021 Nilawar, S., Uddin, M., & Chatterjee, K. (2021). Surface engineering of biodegradable implants: emerging trends in bioactive ceramic coatings and mechanical treatments. Materials Advances, 26(24), 7820-7841.
DOI Scopus55
2021 Uddin, M., Hall, C., Santos, V., Visalakshan, R., Qian, G., & Vasilev, K. (2021). Synergistic effect of deep ball burnishing and HA coating on surface integrity, corrosion and immune response of biodegradable AZ31B mg alloys. Materials Science and Engineering: C, 118(111459), 1-15.
DOI Scopus52 WoS44 Europe PMC9
2021 Uddin, M., Alford, S., & Aziz, S. M. (2021). Evaluating energy generation capacity of PVDF sensors: effects of sensor geometry and loading. Materials, 14(8), 1-18.
DOI Scopus10 Europe PMC5
2021 Jamari, J., Ammarullah, M. I., Saad, A. P. M., Syahrom, A., Uddin, M., van der Heide, E., & Basri, H. (2021). The effect of bottom profile dimples on the femoral head on wear in metal-on-metal total hip arthroplasty. Journal of Functional Biomaterials, 12(2, article no. 38), 1-14.
DOI Scopus120 Europe PMC71
2021 Shankar, S., Nithyaprakash, R., Sugunesh, A. P., Selvamani, K. A., & Uddin, M. S. (2021). Experimental and finite element wear study of silicon nitride against alumina for hip implants with bio-lubricant for various gait activities. Silicon, 13(3), 633-644.
DOI Scopus15
2021 Uddin, M., Williams, D., & Blencowe, A. (2021). Recycling of selective laser sintering waste Nylon powders into fused filament fabrication parts reinforced with Mg particles. Polymers, 13(13), 16 pages.
DOI Scopus22 WoS20 Europe PMC5
2020 Mohanraj, T., Shankar, S., Rajeskar, S., & Uddin, M. S. (2020). Design, development, calibration, and testing of indigenously developed strain gauge based dynamometer for cutting force measurement in the milling process. Journal of Mechanical Engineering and Sciences, 14(1), 6594-6609.
DOI Scopus14
2020 Shankar, S., Nithyaprakash, R., Sugunesh, P., Uddin, M. S., & Pramanik, A. (2020). Contact stress and wear analysis of zirconia against alumina for normal and physically demanding loads in hip prosthesis. Journal of Bionic Engineering, 17(5), 1045-1058.
DOI Scopus17
2020 Shaikh, M. B. N., Aziz, T., Arif, S., Ansari, A. H., Karagiannidid, P. G., & Uddin, M. (2020). Effect of sintering techniques on microstructural, mechanical and tribological properties of Al-SiC composites. Surfaces and Interfaces, 20(100598), 1-29.
DOI Scopus66
2020 Shankar, S., Nithyaprakash, R., Sugunesh, A. P., & Uddin, M. S. (2020). Long-term wear prediction of zirconia on alumina ceramic for hip prosthesis. International Journal of Surface Science and Engineering, 14(3), 192-206.
DOI Scopus7
2020 Shankar, S., Nithyaprakash, R., Santhosh, B. R., Uddin, M. S., & Pramanik, A. (2020). Finite element submodeling technique to analyze the contact pressure and wear of hard bearing couples in hip prosthesis. Computer Methods in Biomechanics and Biomedical Engineering, 23(8), 422-431.
DOI Scopus35 Europe PMC5
2020 Uddin, M., Hall, C., & Santos, V. (2020). Fabrication, characterisation and corrosion of HA coated AZ31B Mg implant material: effect of electrodeposition current density. Surface and Coatings Technologies, 385(article no. 125363), 1-12.
DOI Scopus48 WoS50
2019 Uddin, M. S., Santos, V., & Marian, R. (2019). Interplay of process variables in magnetic abrasive finishing of AISI 1018 steel using SiC and Al₂O₃ abrasives. Journal of manufacturing and materials processing, 3(2), 1-18.
DOI Scopus14
2019 Prakash, C., Singh, S., Singh, R., Ramakrishna, S., Pabla, B. S., Puri, S., & Uddin, M. S. (2019). Preface. Biomanufacturing, v-vi.
2019 Uddin, M. S., & Chan, G. W. C. (2019). Reducing stress concentration on the cup rim of hip implants under edge loading. International journal for numerical methods in biomedical engineering, 35(1, article no. e3149), 1-11.
DOI Scopus19 Europe PMC8
2019 Prakash, C., Singh, S., Pabla, B. S., Sidhu, S. S., & Uddin, M. S. (2019). Bio-inspired low elastic biodegradable Mg-Zn-Mn-Si-HA alloy fabricated by spark plasma sintering. Materials and manufacturing processes, 34(4), 357-368.
DOI Scopus77 WoS52
2019 Pramanik, A., Basak, A. K., Uddin, M. S., Shankar, S., Debnath, S., & Islam, M. N. (2019). Burr formation during drilling of mild steel at different machining conditions. Materials and Manufacturing Processes, 34(7), 726-735.
DOI Scopus32 WoS26
2018 Uddin, M., Basak, A., Pramanik, A., Singh, S., Krolczyk, G., & Prakash, C. (2018). Evaluating hole quality in drilling of Al 6061 alloys. Materials, 11(12), 13 pages.
DOI Scopus97 WoS71 Europe PMC9
2018 Nithyaprakash, R., Shankar, S., & Uddin, M. (2018). Computational wear assessment of hard on hard hip implants subject to physically demanding tasks. Medical and biological engineering and computing, 56(5), 899-910.
DOI Scopus23 Europe PMC8
2018 Uddin, M. S., Hall, C., Hooper, R., Charrault, E., Murphy, P., & Santos, V. (2018). Finite element analysis of surface integrity in deep ball-burnishing of a biodegradable AZ31B Mg alloy. Metals, 8(2, article no. 136), 1-17.
DOI Scopus29 WoS25
2018 Prakash, C., Singh, S., Pabla, B. S., & Uddin, M. S. (2018). Synthesis, characterization, corrosion and bioactivity investigation of nano-HA coating deposited on biodegradable Mg-Zn-Mn alloy. Surface and coatings technology, 346, 9-18.
DOI Scopus100 WoS78
2018 Subramanium, S., Siddarth, R., Rajavel, N., & Uddin, M. (2018). Wear prediction of hard carbon coated hard-on-hard hip implants using finite element method. International journal of computer aided engineering and technology, 10(4), 440-456.
DOI Scopus7
2018 Chowdhury, M. A. K., Rehman, A. U., Uddin, M. S., Alkahtani, M., & Anwar, S. (2018). Multi criteria optimization approach for dressing of vitrified grinding wheel. Tehnicki Vjesnik-Technical Gazette, 25(Supplement 2), 256-265.
DOI Scopus2
2018 Hedayatrasa, S., Kersemans, M., Abhary, K., Uddin, M., & Van Paepegem, W. (2018). Optimization and experimental validation of stiff porous phononic plates for widest complete bandgap of mixed fundamental guided wave modes. Mechanical systems and signal processing, 98, 786-801.
DOI Scopus48
2017 Shankar, S., Gowthaman, K., & Uddin, M. (2017). Combined effect of cup abduction and anteversion angles on long-term wear evolution of PCD-on-PCD hip bearing couple. International journal of biomedical engineering and technology, 24(2), 169-183.
DOI Scopus4
2017 Uddin, M. S., Ibatan, T., & Shankar, S. (2017). Influence of surface texture shape, geometry and orientation on hydrodynamic lubrication performance of plane-to-plane slider surfaces. Lubrication science, 29(3), 153-181.
DOI Scopus81
2017 Prakash, C., & Uddin, M. S. (2017). Surface modification of β-phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity. Surface and coatings technology, 326, 134-145.
DOI Scopus163
2017 Uddin, M. S., Liu, Y. W., & Shankar, S. (2017). New star-like surfacetexture for enhanced hydrodynamic lubrication performance. Archives of metallurgy and materials, 62(3), 1863-1869.
DOI
2017 Pramanik, A., Dixit, A., Chattopadhyaya, S., Uddin, M., Dong, Y., Basak, A., & Littlefair, G. (2017). Fatigue life of machined components. Advances in Manufacturing, 5(1), 59-76.
DOI Scopus50 WoS45
2017 Uddin, M., Pham, B., Sarhan, A., Basak, A., & Pramanik, A. (2017). Comparative study between wear of uncoated and TiAlN-coated carbide tools in milling of Ti6Al4V. Advances in Manufacturing, 5(1), 83-91.
DOI Scopus28 WoS21
2017 Pramanik, A., Islam, M., Davies, I., Boswell, B., Dong, Y., Basak, A., . . . Chattopadhyaya, S. (2017). Contribution of machining to the fatigue behaviour of metal matrix composites (MMCs) of varying reinforcement size. International Journal of Fatigue, 102, 9-17.
DOI Scopus30 WoS27
2017 Uddin, M., Sidek, M., Faizal, M., Ghomashchi, R., & Pramanik, A. (2017). Evaluating Mechanical Properties and Failure Mechanisms of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Parts. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 139(8), 12 pages.
DOI Scopus124 WoS107
2017 Pramanik, A., Basak, A., Dong, Y., Sarker, P., Uddin, M., Littlefair, G., . . . Chattopadhyaya, S. (2017). Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys - a review. Composites: Part A, 101, 1-29.
DOI Scopus609 WoS529
2017 Uddin, M. S., Rosman, H., Hall, C., & Murphy, P. (2017). Enhancing the corrosion resistance of biodegradable Mg-based alloy by machining-induced surface integrity: influence of machining parameters on surface roughness and hardness. The international journal of advanced manufacturing technology, 90(5-8), 2095-2108.
DOI Scopus68 WoS69
2017 Hedayatrasa, S., Kersemans, M., Abhary, K., Uddin, M., Guest, J. K., & Van Paepegem, W. (2017). Maximizing bandgap width and in-plane stiffness of porous phononic plates for tailoring flexural guided waves: Topology optimization and experimental validation. Mechanics of materials, 105, 188-203.
DOI Scopus42
2016 Shankar, S., Gowthaman, K., & Uddin, M. S. (2016). Predicting long-term wear performance of hard-on-hard bearing couples: effect of cup orientation. Medical and biological engineering and computing, 54(10), 1541-1552.
DOI Scopus11 Europe PMC2
2016 Uddin, M. S., Quintel, J., & Zivkovic, G. (2016). On the design of energy absorbing crash buffers for high speed roadways. Open Journal of Safety Science and Technology, 6(1), 11-24.
DOI
2016 Hedayatrasa, S., Abhary, K., Uddin, M. S., & Guest, J. K. (2016). Optimal design of tunable phononic bandgap plates under equibiaxial stretch. Smart Materials and Structures, 25(5), 1-20.
DOI Scopus40
2016 Uddin, M. S., & Dong, S. (2016). On the design and analysis of an octagonal-ellipse ring based cutting force measuring transducer. Measurement, 90, 168-177.
DOI Scopus44
2016 Uddin, M. S., & Liu, Y. W. (2016). Design and optimization of a new geometric texture shape for the enhancement of hydrodynamic lubrication performance of parallel slider surfaces. Biosurface and biotribology, 2(2), 59-69.
DOI
2016 Hedayatrasa, S., Abhary, K., Uddin, M., & Ng, C. (2016). Optimum design of phononic crystal perforated plate structures for widest bandgap of fundamental guided wave modes and maximized in-plane stiffness. Journal of the Mechanics and Physics of Solids, 89, 31-58.
DOI Scopus73 WoS67
2016 Uddin, M. S., Mak, C. Y. E., & Callary, S. A. (2016). Evaluating hip implant wear measurements by CMM technique. Wear, 364-365, 193-200.
DOI Scopus20 WoS14
2016 Bhattacharyya, K., Uddin, M. S., & Layek, G. C. (2016). Exact solution for thermal boundary layer in Casson fluid flow over permeable shrinking sheet with variable wall temperature and thermal radiation. Alexandria engineering journal, 55(2), 1703-1712.
DOI
2015 Ibatan, T., Uddin, M. S., & Chowdhury, M. A. K. (2015). Recent development on surface texturing in enhancing tribological performance of bearing sliders. Surface and coatings technology, 272, 102-120.
DOI Scopus313
2015 Uddin, M., Hall, C., & Murphy, P. (2015). Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants. Science and Technology of Advanced Materials, 16(5), 1-24.
DOI Scopus164 WoS145 Europe PMC31
2014 Uddin, M. S. (2014). Influence of bearing geometry and material on the contact of dual mobility implants: A finite element analysis. International journal of biomedical engineering and technology, 15(1), 45-58.
DOI Scopus11
2014 Hedayatrasa, S., Abhary, K., & Uddin, M. (2014). Numerical study and topology optimization of 1D periodic bimaterial phononic crystal plates for bandgaps of low order Lamb waves. Ultrasonics, 57(C), 104-124.
DOI Scopus33 Europe PMC2
2014 Uddin, M. S. (2014). On the influence and optimisation of cutting parameters in finishing of metallic femoral heads of hip implants. International Journal of Advanced Manufacturing Technology, 73(9-12), 1523-1532.
DOI Scopus15 WoS13
2014 Uddin, M. S. (2014). Wear measurement and assessment of explanted cross-linked PE acetabular cups using a CMM. Tribology Transactions, 57(5), 767-777.
DOI Scopus18 WoS13
2014 Uddin, M. S. (2014). Contact of dual mobility implants: effects of cup wear and inclination. Computer methods in biomechanics and biomedical engineering, 18(15), 1611-1621.
DOI Scopus21 Europe PMC12
2013 Uddin, M. S., & Majewski, P. J. (2013). Frictional heating in hip implants: a review. Procedia engineering, 56, 725-730.
DOI Scopus9 WoS6
2013 Uddin, M. S., & Zhang, L. (2013). Predicting the wear of hard-on-hard hip joint prostheses. Wear, 301(1-2), 192-200.
DOI Scopus100
2009 Uddin, M. S., Ibaraki, S., Matsubara, A., & Matsushita, T. (2009). Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors. Precision Engineering, 33(2), 194-201.
DOI Scopus159
2007 Uddin, M. S., Ibaraki, S., Matsubara, A., Nishida, S., & Kakino, Y. (2007). A tool path modification approach to cutting engagement regulation for the improvement of machining accuracy in 2D milling with a straight end mill. Journal of Manufacturing Science and Engineering, 129(6), 1069-1079.
DOI Scopus17
2006 Uddin, M. S., Ibaraki, S., Matsubara, A., Nishida, S., & Kakino, Y. (2006). Constant engagement tool path generation to enhance machining accuracy in end milling. JSME International Journal Series C Mechanical Systems Machine Elements and Manufacturing, 49(1), 43-49.
DOI Scopus20

Year Citation
2019 Prakash, C., Singh, S., Singh, R., Ramakrishna, S., Pabla, B. S., Puri, S., & Uddin, M. S. (Eds.) (2019). Biomanufacturing. Switzerland: Springer.
DOI
2019 Prakash, C., Singh, S., Singh, R., Ramakrishna, S., Pabla, B. S., Puri, S., & Uddin, M. S. (2019). Biomanufacturing. C. Prakash, S. Singh, R. Singh, S. Ramakrishna, B. S. Pabla, S. Puri, & M. S. Uddin (Eds.), Springer International Publishing.
DOI Scopus21

Year Citation
2021 Uddin, M., Stevens, G., Williams, D., Ghaley, A., Jur, J. D., & Kalala, P. (2021). Analysis of quasi-static perforation performance of metal-plastic laminates with different indenter nose shapes. In ACAM10: 10th Australasian Congress on Applied Mechanics (pp. 383-396). Australia: Engineers Australia.
2021 Santos, V., Uddin, M., & Hall, C. (2021). Influence of shot peening and ball burnishing on surface integrity and corrosion resistance of AZ31B Mg alloys. In ACAM10: 10th Australasian Congress on Applied Mechanics (pp. 50-65). Australia: Engineers Australia.
2021 Samarasinghe, C., Uddin, M., Bari, S., & Xian, C. (2021). Temperature and force generation in surgical bone drilling. In M. M. Alam, M. A. Rahman, & M. Ali (Eds.), AIP Conference Proceedings Vol. 2324 (pp. 1-8). US: American Institute of Physics.
DOI Scopus5 WoS5
2020 Samarasinghe, C., Uddin, M., Bari, S., & Xian, C. (2020). Surgical bone drilling: a review. In Conference proceedings: International Mechanical Engineering Congress and Exposition Vol. 3 (pp. 1-8). US: American Society of Mechanical Engineers.
DOI Scopus3 WoS1
2017 Uddin, M. S., Shafie, N. A., & Zivkovic, G. (2017). Hexagonal hollow tube based energy absorbing crash buffers for roadside fixed objects. In IOP Conference Series: Materials Science and Engineering Vol. 184 (pp. 1-10). Malaysia: IOP Publishing.
DOI Scopus2
2016 Hedayatrasa, S., Abhary, K., & Uddin, M. (2016). On topology optimization of acoustic metamaterial lattices for locally resonant bandgaps of flexural waves. In I. D. M. Mee (Ed.), Proceedings of ACOUSTICS 2016 (pp. 1-7). Australia: Australian Acoustical Society.
2016 Hedayatrasa, S., Abhary, K., & Uddin, M. (2016). On topology optimization of acoustic metamaterial lattices for locally resonant bandgaps of flexural waves. In 2nd Australasian Acoustical Societies Conference Acoustics 2016 Vol. 2 (pp. 744-750).
Scopus3
2015 Hedayatrasa, S., Abhary, K., Uddin, M., & Ng, C. T. (2015). Novel approach in topology optimization of porous plate structures for phononic bandgaps of flexural waves. In World Congress on Structural and Multidisciplinary Optimisation (pp. 77-82). Australia: Sydney University Press.
2014 Uddin, M., & Male, S. (2014). An industry-based project in an engineering dynamics course. In Proceedings of the 25th AAEE2014 Conference (pp. 520-527). Australia: Massey University.
2014 Uddin, M. S., Quintel, J., & Zivkovic, G. (2014). Design and analysis of energy absorbing crash buffers for fixed objects in high speed roadways. In 8th Australasian Congress on Applied Mechanics (ACAM 8) (pp. 796-803). Australia: Engineers Australia.
Scopus2
2014 Uddin, M. S., & Dong, S. (2014). On the modified octagonal ring based cutting force measuring transducers for improved sensitivity. In 8th Australasian Congress on Applied Mechanics (ACAM 8) (pp. 916-923). Barton ACT: Engineers Australia.
2014 Vassar, A., Gangadhara, P., Burton, L., Doh, J. H., Ford, R., James, M., . . . White, T. (2014). The adaptive virtual workshop: maintaining student engagement through an on-line adaptive resource for engineering design education. In Proceedings of the 25th AAEE2014 Conference (pp. 1-12). Australia: Australasian Association for Engineering Education.
2013 Uddin, M. S. (2013). Predicting the contact of dual mobility hip implant: Effect of bearing geometry. In J. C. H. Goh (Ed.), IFMBE Proceedings - The 15th International Conference on Biomedical Engineering Vol. 43 (pp. 291-294). Switzerland: Springer.
DOI Scopus1
2013 Uddin, M. S. (2013). On the optimization of cutting parameters for the manufacture of metallic femoral heads. In J. Goh (Ed.), The 15th International Conference on Biomedical Engineering. IFMBE Proceedings Vol. 43 (pp. 813-816). Switzerland: Springer.
DOI Scopus1
2013 Uddin, M., Shelke, A., & Yang, J. (2013). Impact sensing in sandwich structures using highly nonlinear solitary waves. In F. K. Chang (Ed.), Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring, IWSHM 2013 Vol. 2 (pp. 2617-2623). US: IWSHM.
2012 Uddin, M. S. (2012). On the influence of acetabular cup wear and inclination on the contact mechanics of dual mobility implants. In A. Kotousov (Ed.), Final Proceedings: 7th Australian Congress on Applied Mechanics (ACAM7) (pp. 211-219). Australia: Engineers Australia.
2011 Uddin, M. S., & Zhang, L. (2011). Contact stresses in PCD-on-PCD hip joint prostheses. In H. Haddad, & Y. M. YM (Eds.), Proceedings of AES-ATEMA’ 2011 International Conference on Advances and Trends in Engineering Materials and their Applications (pp. 139-147). Ottawa, Canada: Advanced Engineering Solutions.
2011 Uddin, M. S., & Zhang, L. C. (2011). Contact stresses in PCD-on-PCD hip joint prostheses. In AES Atema International Conference Series Advances and Trends in Engineering Materials and their Applications (pp. 135-143).
Scopus2
2010 Uddin, M. S., & Zhang, L. (2010). Minimizing stress concentrations in the femoral heads of hip joint prostheses: effect of borehole shapes. In Key Engineering Materials: 9th Asia-Pacific Conference on Materials Processing, APCMP2010 Vol. 443 (pp. 736-741). Switzerland: Trans Tech Publications Ltd.
DOI Scopus1
2007 Uddin, M. S., Matsubara, A., Ibaraki, S., & Yasuda, T. (2007). Comparison of cutting strategies for high productive end milling. In Proceedings of the 35th International Matador 2007 Conference (pp. 191-194).
DOI Scopus3
2005 Uddin, M. S., Ibaraki, S., Matsubara, A., Nishida, S., & Kakino, Y. (2005). Constant engagement tool path generation to enhance machining accuracy in end milling. In Lem 2005 3rd International Conference on Leading Edge Manufacturing in 21st Century (pp. 951-956).

Year Citation
2019 Huf, L., Uddin, M. S., Bryce, A., & Walker, A. W. (2019). WO/2019/241824, Portable load cell.

  • A durable, atomic-oxygen reaction resistant coating for 3D printed polymer (PEEK) CubeSats, iLaunch FastTrack, 23/05/2025 - 31/12/2025

  • IMCRC: Energy absorbing traffic lights (EATL), Innovative Manufacturing CRC Limited, 01/10/2021 - 30/10/2022

Courses I teach

  • MENG 2009 Mechanical Engineering Practice (2025)
  • MENG 2014 Engineering Dynamics (2025)
  • MENG 2009 Mechanical Engineering Practice (2024)
  • MENG 2014 Engineering Dynamics (2024)

Date Role Research Topic Program Degree Type Student Load Student Name
2024 Principal Supervisor - - Master Full Time Mr Prashanth .
2024 Principal Supervisor - Doctor of Philosophy Doctorate Full Time Mr Stephen Edward Barrett
2024 Co-Supervisor - Doctor of Philosophy Doctorate Full Time Mr Shahrukh Alam
2023 Principal Supervisor - Doctor of Philosophy Doctorate Full Time Mr Amanullah Tomal
2023 Co-Supervisor - Doctor of Philosophy Doctorate Full Time Mr Ankit Shrivastava
2019 Principal Supervisor - - Master Full Time Mr Jan Vincent Santos

Connect With Me

External Profiles

Other Links